ABB PLCs & Controllers

ABB 07DI92

Digital Input Module 07 DI 92

Manufacturer: ABB Part Number: 07DI92

Genuine surplus ABB 07DI92 digital input module — 32 isolated 24 V DC inputs for CS31 bus systems, verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Number of inputs 32, in 4 groups of 8
Rated supply voltage 24 V DC
Max. current consumption 0.15 A
Input signal delay typ. 7 ms
System bus interface 1 CS31 system bus interface (EIA RS-485)
Permissible operating temperature 0...55 °C
Dimensions (W x H x D) 120 x 140 x 85 mm
Weight 450 g
Mounting DIN rail 15 mm deep or 4 x M4 screws

Description

When a CS31 remote I/O station loses an input group, every downstream interlock and status signal on that segment goes dark. Getting a genuine ABB 07DI92 digital input module back into the rack quickly is what keeps the line visible and controllable. This module carries 32 electrically isolated 24 V DC inputs in four groups of eight, communicating over the CS31 system bus, and Autronexa supplies it as verified surplus or refurbished stock rather than a factory-order wait.

What This Input Module Does in a CS31 System

The 07 DI 92 operates as a remote module on the CS31 system bus and occupies two digital addresses for inputs. Its 32 channels split into four groups of eight, each group with its own reference potential (ZP0 through ZP3) and full electrical isolation from the other groups and from the rest of the unit. That isolation matters in practice: a fault or ground offset on one machine section does not drag the other three groups down with it. The bus connection itself is also isolated from supply and inputs, and the interface follows the EIA RS-485 standard. A coding switch under the right-side housing cover sets the address. On the front panel, 32 green LEDs show per-channel signal status, a red LED reports errors, and a test button supports on-the-spot checks. Input signal delay is typically 7 ms, and the module draws a maximum of 0.15 A from its 24 V DC supply.

Figure 1: Front view of the ABB 07DI92 Digital Input Module 07 DI 92 showing its physical design and enclosure.

Why Genuine Surplus Fits This Module

CS31 is a long-established ABB system, and complete remote I/O modules like this one are increasingly sourced from decommissioned panels rather than new production. Autronexa’s approach is straightforward: each unit is tested against OEM datasheet specifications and functionally verified by our sourcing team before it ships. You get the genuine article — correct GJR5 2524 00 R0101 ordering identity, correct connector set — without paying a new-from-OEM list price or absorbing an open-ended factory lead time. For maintenance teams holding a spare-parts budget, that combination of verified condition and shorter availability is the practical reason to buy surplus here. Please verify current lifecycle status and availability with Autronexa before ordering.

Figure 2: Technical layout and connection details for the ABB 07DI92 Digital Input Module 07 DI 92.

Sourcing Checks Before You Order

Confirm three things when specifying this module. First, the exact ordering number: the 07 DI 92 carries order number GJR5 2524 00 R0101, and that is the identity to match against your existing unit. Second, the connector scope: the module ships with one 5-pin connector, one 3-pin connector, and four 10-pin connectors, so check whether your cabinet wiring reuses the existing terminal blocks or needs the full set. Third, the mechanical fit: the housing measures 120 x 140 x 85 mm and mounts either on a 15 mm DIN rail per DIN EN 50022–35 or with four M4 screws, with the connectors pointing upward and downward. Operating temperature range is 0…55 °C, and natural convection cooling must stay unobstructed. Share your part number with Autronexa and our sourcing team will confirm condition, connector content, and current availability.

Frequently asked questions

Is this a genuine ABB 07DI92 module, or a third-party copy?

Autronexa supplies genuine ABB units. Each module is checked against OEM datasheet markings and the ordering number GJR5 2524 00 R0101 before it is listed, so the part you receive matches the original specification.

What condition will the module arrive in?

Our default condition is Refurbished: the unit is tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa if you need a specific condition grade confirmed before purchase.

How quickly can Autronexa ship the 07DI92?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability; surplus units already in stock typically move faster than a factory order.

Does the module come with the connectors needed for installation?

Yes. The scope of delivery includes one 5-pin connector (5.08 mm grid), one 3-pin connector (5.08 mm grid), and four 10-pin connectors (3.81 mm grid), matching the removable screw-terminal connection method.

Is the 07DI92 still supported by ABB?

Lifecycle status is not stated in our source data. Please verify current lifecycle status and availability with Autronexa before ordering so you can plan spares accordingly.

Related & compatible parts

ABB

SS823

Genuine surplus ABB SS823 voting unit for redundant power supplies — verified, tested, and ready for your AC…

In Stock

ABB

DI814

Genuine surplus ABB DI814 digital input module: 16 channels, 24 V d.c., 600 m field cable length. Verified…

In Stock

ABB

AI845

Genuine surplus ABB AI845 8-channel analog input module for S800 I/O — HART pass-through, redundant-ready, verified and ready…

In Stock

ABB

C1500000STD

Genuine surplus ABB C1500000STD Commander 150 process controller — verified condition, practical lead times, and sourcing support from…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: 07DI92

We reply within one business day.

07DI92 Quote reply within 1 business day