ABB Power Supplies

ABB SD832

Power Supply Units

Manufacturer: ABB Part Number: SD832

Genuine surplus ABB SD832 power supply — 24 V DC, 5 A, 120 W, DIN-rail. Verified condition and faster lead time than OEM.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Rated output voltage 24 V d.c.
Rated output current 5 A
Rated output power 120 W
Mains/input voltage, nominal 100-120 V a.c. / 200-240 V a.c. auto-select
Mains frequency 50-60 Hz +-6 %
Efficiency 89.4/90.2 %
Protection rating IP20 according to IEC 60529
Dimensions (W x D x H) 32 mm x 117 mm x 124 mm
Weight 500 g (1.1 lbs.)

Description

When a 24 V DC rail drops on a running control cabinet, every minute of downtime adds cost. The ABB SD832 power supply unit converts mains input to a regulated 24 V DC output at 5 A and 120 W, and sourcing a genuine surplus or refurbished unit through Autronexa gets that rail back up faster than waiting on OEM lead time. Maintenance teams and panel builders specify this DIN-rail supply because it delivers stable SELV or PELV output with over-current and over-voltage protection built in.

What the SD832 Delivers in a Control Cabinet

This unit is a switch-mode power supply rated at 24 V DC output, 5 A, and 120 W, with an auto-select input that accepts 100-120 V a.c. or 200-240 V a.c. at 50-60 Hz. That dual-range input means one stock unit covers both North American and European mains, which reduces the number of variants a maintenance storeroom must carry. Efficiency is listed at 89.4/90.2 %, and heat dissipation at 14/13 W — figures that matter when you are sizing enclosure cooling and calculating energy cost over a multi-year service life. The output is protected against over-current (current limit) and over-voltage (OVP below 39 V), and the secondary circuit is accepted for SELV and PELV applications. A soft-start feature prevents power-on from tripping fuses or earth-fault circuit breakers, avoiding nuisance trips that send a technician back to the panel.

Figure 1: Front view of the ABB SD832 Power Supply Units showing its physical design and enclosure.

Why Genuine Surplus Fits This Power Supply

ABB lists This unit under article number 3BSC610065R1, and it carries CE marking, IEC 61131-2, UL 508, and EN 50178 electrical safety listings plus marine certification from ABS, BV, DNV-GL, and LR. Those certifications are the reason a verified surplus unit is worth specifying over an uncertified clone: the safety and EMC approvals travel with the genuine article. Autronexa sources surplus and refurbished unit units and functionally verifies each against OEM datasheet specifications before it ships. Compared with OEM list price and standard factory lead time, a refurbished unit typically shortens the wait and lowers the spend — practical when a single failed supply is holding up a commissioning schedule. Please verify current lifecycle status and availability with Autronexa before ordering.

Sourcing Checklist Before You Buy

Confirm the article number 3BSC610065R1 matches your panel documentation, and check whether your application is non-redundant or redundant. Redundant configurations require diode voting units SS823 or SS832 — This unit does not include load sharing or a supervision relay, so plan the voting module separately. The unit mounts on DIN rail at 32 mm width, 117 mm depth, and 124 mm height, weighing 500 g, with recommended mounting spacing of 15 mm horizontally and 40 mm vertically for airflow. Protection rating is IP20, maximum ambient temperature is 55 °C, and maximum output current is 6 A at ambient below 45 °C. If your cabinet runs warmer, account for derating in your cost and reliability calculation. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB SD832, or a clone?

Autronexa verifies each unit against OEM datasheet markings and the article number 3BSC610065R1 before listing. We supply genuine surplus and refurbished ABB units, not grey-market copies.

What condition will the SD832 arrive in?

Our default condition is Refurbished: each unit is tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa if you need a specific condition grade.

How fast can you ship the SD832?

Lead time depends on current stock. Contact Autronexa for current lead time and availability on article number 3BSC610065R1.

Can the SD832 be used in a redundant configuration?

Yes, but redundant applications require diode voting units SS823 or SS832. The SD832 itself has no load sharing or supervision relay, so the voting module must be sourced separately.

Is the SD832 still supported by ABB?

Lifecycle status is not stated in our current data. Contact Autronexa to verify OEM support status and availability before ordering.

Related & compatible parts

ABB

SM812

Genuine surplus ABB SM812 safety module for intelligent controller supervision in SIL1-2 and 1oo2 SIL3 architectures. Verified condition.

In Stock

ABB

DO821

Genuine surplus ABB DO821 8-channel relay module — verified, tested, and ready to ship for S800 I/O systems.

In Stock

ABB

CI868A

Genuine surplus ABB CI868A connects AC 800M controllers to IEC 61850 substation devices — verified condition, faster than…

In Stock

ABB

AI880A

Genuine surplus ABB AI880A: 8-channel high-integrity analog input module, SIL3 certified, verified condition, ready to ship.

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: SD832

We reply within one business day.

SD832 Quote reply within 1 business day