Schneider Electric I/O & Function Modules

Schneider Electric BMXDDO3202K

Output Module

Manufacturer: Schneider Electric Part Number: BMXDDO3202K

Genuine surplus BMXDDO3202K Modicon X80 32-channel transistor output module — verified condition, clear lead times, sourcing help from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Channels 32 channels
Signal type Transistor output
Output range 12/24 V DC, 0.55 A per channel (17.6 A module max)
Response time 0.3 ms
Isolation Group-to-group isolation
Connection 40-pin terminal block (high density)
Power consumption 3.1 W
Bus current 130 mA @ 24 V DC
Operating temperature 0°C to +60°C
Protection rating IP20

Description

When a Modicon X80 rack loses a discrete output card, every downstream actuator on that segment stalls. The BMXDDO3202K from Schneider Electric is a 32-channel, 24 V DC transistor output module built for M340 and M580 platforms, and Autronexa supplies it as genuine surplus or refurbished stock with verified condition and practical lead times.

What This Output Module Does in a Modicon X80 Rack

The module packs 32 transistor outputs into a single high-density slot, using a 40-pin terminal block for field wiring. Each channel handles 12/24 V DC at 0.55 A, with a 17.6 A module maximum, so one card can drive a dense bank of relays, solenoids, or indicator circuits without spreading the load across multiple modules. That density has a direct cost effect: fewer slots consumed, fewer backplane connections, and less cabinet space per output point. Group-to-group isolation helps contain a field fault to one group instead of the whole card, which protects the rest of the I/O rack. A module status LED gives technicians a first-line diagnostic without pulling the card. Response time is 0.3 ms, and up to 3 channels can be paralleled when a single point needs more drive capacity.

Figure 1: Front view of the Schneider Electric BMXDDO3202K Output Module showing its physical design and enclosure.

Why Genuine Surplus Fits This Module

Because the Modicon X80 platform is shared between M340 and M580 controllers, this output module stays in demand across both installed bases. That demand is exactly why sourcing matters: OEM lead times on active I/O can stretch while a line waits, and a stalled rack costs more than the card itself. Autronexa stocks verified surplus and refurbished units, each tested against OEM datasheet specifications and functionally verified by our sourcing team. The practical result is a lower acquisition cost than OEM list price without gambling on an untraceable grey-market card. Every unit is genuine parts, verified — not a clone. Please verify current lifecycle status and availability with Autronexa before ordering.

Figure 2: Technical layout and connection details for the Schneider Electric BMXDDO3202K Output Module.

Specs That Affect Your Cost and Uptime

Three figures matter most when you evaluate this card for a replacement or expansion. First, the 3.1 W power consumption and 130 mA bus current at 24 V DC keep the backplane load predictable, so you are not forced to re-engineer the power budget when adding a card. Second, the 833,000 h MTBF points to a long service interval, which lowers the total cost of ownership compared with a cheaper card that fails more often. Third, the 0°C to +60°C operating range and IP20 protection rating define where the module can live — inside a protected cabinet, not on an open panel. At 100 × 28 × 93 mm and 0.142 kg, it fits standard X80 rack spacing. Confirm the exact revision and terminal-block compatibility with your supplier before dispatch.

Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: BMXDDO3202K-datasheet.pdf

Frequently asked questions

Is this BMXDDO3202K a genuine Schneider Electric module, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. The BMXDDO3202K we supply is genuine Schneider Electric, not a copy or grey-market substitute.

What condition will the output module arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units may also be available — confirm the exact condition with Autronexa when you request a quote.

How fast can Autronexa ship the BMXDDO3202K?

Lead time depends on current stock at the time of your request. Contact Autronexa for the current lead time and availability; surplus and refurbished units are ready to ship once verified.

Does this module work with both M340 and M580 controllers?

Yes. The Modicon X80 platform is shared between M340 and M580, and this 32-channel transistor output module is listed as active on that shared I/O platform. Confirm your rack and terminal-block configuration with your supplier.

Is the BMXDDO3202K still supported by Schneider Electric?

The lifecycle status in our data is active, last verified 2026-09. Contact Autronexa to confirm current OEM support status before ordering.

Related & compatible parts

Schneider Electric

BMEP585040

Genuine surplus Schneider Electric BMEP585040 processor module for Modicon M580 — verified condition, faster lead time than OEM.

In Stock

Schneider Electric

TM5NS31

Genuine surplus Schneider Electric TM5NS31 Sercos III module — verified, tested, and ready to ship for Modicon LMC078…

In Stock

Schneider Electric

TSXSUP1011

Genuine surplus Schneider Electric TSXSUP1011 power supply for TSX Micro PLCs — 24 V AC/DC input, 24 V…

In Stock

Schneider Electric

140XTS10215

Genuine surplus Schneider 140XTS10215 Quantum I/O pigtail cable, 4.6 m with 40 color-coded leads — verified condition, ready…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: BMXDDO3202K

We reply within one business day.

BMXDDO3202K Quote reply within 1 business day