Schneider Electric Communication Modules

Schneider Electric 170INT11003C

Communication Adapter

Manufacturer: Schneider Electric Part Number: 170INT11003C

Genuine surplus Schneider 170INT11003C communication adapter for Modicon Momentum — verified condition, 500 kbit/s ring topology, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Transmission Rate 500 kbit/s
Topology Ring
Number of Devices Per Segment 0 to 254
Max Cable Distance between Devices 12800 m
Fail State Fail Safe
Local Signaling LED
Electrical Connection 2 Connectors SUB-D 9
Protection Class IP20
Resistance to Electromagnetic Fields 10 V/m
Resistance to Electrostatic Discharge 4 kV/8 kV

Description

When a Modicon Momentum segment loses its communication link, every device on the ring stops reporting, and the cost of that silence climbs with each production hour. The Schneider Electric 170INT11003C communication adapter restores that link at 500 kbit/s across a ring topology, and genuine surplus or refurbished stock gets it to your panel faster than an OEM factory order. Maintenance teams choose verified surplus here because the adapter is a proven design, not a consumable — condition matters more than calendar age.

What This Adapter Does in a Momentum Segment

The 170INT11003C sits inside a Modicon Momentum system and manages the ring traffic that ties devices together. Its 500 kbit/s transmission rate is the practical ceiling for this adapter, so segment design should keep node counts and cable runs within the published limits rather than assuming headroom. The ring topology supports 0 to 254 devices per segment, which means one adapter can serve a dense I/O cluster without adding repeaters or extra hardware — a direct saving on both component cost and cabinet space. Maximum cable distance between devices reaches 12,800 m, so long conveyor lines and remote marshalling cabinets can stay on one ring instead of being split into separately equipped zones. Two SUB-D 9 connectors handle the electrical connection, keeping field wiring familiar for technicians who already service Momentum racks.

Figure 1: Front view of the Schneider Electric 170INT11003C Communication Adapter showing its physical design and enclosure.

Why Refurbished Surplus Fits This Communication Adapter

A communication adapter is a low-wear item: no moving parts, no consumable contacts, and a duty cycle driven by network traffic rather than mechanical stress. That makes professionally refurbished surplus a practical alternative to a full OEM list-price purchase, especially when a line is down and the factory lead time runs longer than your maintenance window. Autronexa verifies each unit against OEM datasheet markings and cross-references the part number before it enters stock, so what arrives matches the configuration your Momentum segment expects. The cost case is straightforward: you pay surplus pricing for a tested unit and avoid the premium attached to new-from-OEM channel stock, while the 0.07 kg housing and IP20 rating confirm this is an internal-cabinet component where replacement is a swap, not a rebuild. Genuine parts, verified — that is the standard every unit is held to before shipping.

Figure 2: Technical layout and connection details for the Schneider Electric 170INT11003C Communication Adapter.

Specs That Drive Uptime and Cost

Three ratings matter most when budgeting for this adapter. First, fail-safe behaviour: the fail state is Fail Safe, so a fault condition drives the segment toward a defined safe state rather than an ambiguous one, which shortens fault diagnosis and reduces troubleshooting labour. Second, electromagnetic resilience: resistance to electromagnetic fields is 10 V/m and resistance to electrostatic discharge is 4 kV/8 kV, values that suit cabinets near drives and switching equipment — specifying an adapter without that immunity invites intermittent faults that are expensive to chase. Third, local signaling through an LED gives technicians a front-panel status check without opening a laptop, cutting mean time to repair. Confirm the exact model and revision against your existing unit, and contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine Schneider Electric 170INT11003C, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. The adapter you receive is a genuine Schneider Electric unit, not a copy.

What condition will the 170INT11003C arrive in?

Units ship in the site default condition, Refurbished — tested against OEM datasheet specifications and functionally verified by our sourcing team.

How fast can you ship the 170INT11003C?

Contact Autronexa for current lead time. Surplus and refurbished stock is held ready to ship, and we confirm availability against your required date before order.

Does the 170INT11003C support 254 devices per segment?

Yes. The published specification lists 0 to 254 devices per segment in a ring topology at 500 kbit/s, with a maximum cable distance between devices of 12,800 m.

Is the 170INT11003C still supported by Schneider Electric?

Contact Autronexa to verify OEM support status. We can also confirm whether refurbished surplus stock covers your replacement need regardless of lifecycle position.

Related & compatible parts

Schneider Electric

140NOM21200C

Genuine surplus Schneider 140NOM21200C DIO head-end adaptor for Modicon Quantum — verified condition, ready to ship.

In Stock

Schneider Electric

ATV930D30N4Z

Genuine surplus Schneider Electric ATV930D30N4Z drive — dual-rated 30/22 kW, verified condition, faster than OEM lead times.

In Stock

Schneider Electric

BMXDRA0804T

Genuine surplus Schneider Electric BMXDRA0804T: 8-channel relay output module with diagnostics, verified and ready to ship.

In Stock

Schneider Electric

TSXETG3021

Genuine surplus TSXETG3021 web server and gateway module — verified condition, practical lead times, and sourcing help from…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: 170INT11003C

We reply within one business day.

170INT11003C Quote reply within 1 business day