Schneider Electric Power Supplies

Schneider Electric 140CPS12400

Power supply module

Manufacturer: Schneider Electric Part Number: 140CPS12400

Genuine surplus Schneider Electric 140CPS12400 redundant power supply for Modicon Quantum — verified condition, faster than OEM lead time.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Power supply type Redundant
Input voltage 115 V (93...138 V) AC 47…63 Hz; 230 V (170...276 V) AC
Input current 1100 mA at 115 V; 600 mA at 230 V
Output voltage 5.1 V DC
Output current 8 A at 140 °F (60 °C), redundant
Rated power 130 VA
Operating temperature 32…140 °F (0…60 °C)
Net weight 1.43 lb (0.65 kg)

Description

When a Modicon Quantum rack loses its power supply, every I/O module on the backplane goes dark with it. The Schneider Electric 140CPS12400 is a redundant power supply module for the Modicon Quantum automation platform, and Autronexa supplies it as a genuine surplus unit with verified condition and practical lead times. It accepts 115 V or 230 V AC input and delivers 5.1 V DC at up to 8 A in redundant configuration at 60 °C, with internal overvoltage and overload protection.

What This Module Does in a Quantum Rack

The 140CPS12400 belongs to Schneider Electric’s Modicon Quantum range and occupies a standard module slot. Its job is to convert AC control power into the 5.1 V DC the backplane distributes to processors, I/O and communication modules. The redundant power supply type means two units can share the load so that a single supply failure does not drop the rack. Local signalling is a single green LED marked PWR OK, which gives maintenance staff a direct visual check of output health without a meter. Input current is 1100 mA at 115 V and 600 mA at 230 V, and the associated fuse rating is 2 A slow-blow. Rated power in VA is 130 VA. Harmonic distortion stays at or below 10 % of the fundamental rms value, which matters on plants with sensitive upstream distribution.

Figure 1: Front view of the Schneider Electric 140CPS12400 Power supply module showing its physical design and enclosure.

Why Buy This Power Supply as Genuine Surplus

Redundant supplies are often the last item on a spares shelf until a rack trips, and OEM lead times for legacy Quantum hardware rarely match that urgency. Autronexa stocks surplus and refurbished unit units that are tested against OEM datasheet specifications and functionally verified by our sourcing team before dispatch. You get a genuine part, verified, rather than an unmarked substitute. The module carries CE marking and UL 508 and CSA C22.2 No 142 standards, with cUL and FM Class 1 Division 2 certifications, so the compliance paperwork trail stays intact when you fit a surplus unit. Net weight is 1.43 lb (0.65 kg), and the module ships in its original package format of 12.40 in by 6.50 in by 1.97 in. For maintenance managers keeping a Quantum line running, that combination of verified condition and short lead time is the practical answer.

Figure 2: Technical layout and connection details for the Schneider Electric 140CPS12400 Power supply module.

Selection and Sourcing Checks

Before ordering, confirm the exact model string on your existing module and match it to unit, since Quantum power supplies are not interchangeable across all rack configurations. Decide whether you need a single unit or a matched pair for true redundancy, and check that your enclosure temperature stays within the 32…140 °F (0…60 °C) operating range, because the 8 A output rating is specified at 60 °C in redundant mode. Storage tolerance extends from -40…185 °F (-40…85 °C), and relative humidity up to 95 % without condensation is acceptable. Review the environmental ratings against your panel: resistance to electromagnetic fields is 9.1 V/m (10 V/m) across 80…2000 MHz under IEC 801-3, and electrostatic discharge tolerance is 4 kV contact and 8 kV on air under IEC 801-2. Operating altitude is rated to 16404.2 ft (5000 m). Please verify current lifecycle status and availability with Autronexa before ordering, and ask our sourcing team to confirm the condition grade of the specific unit on the shelf.

Frequently asked questions

Is this a genuine Schneider Electric 140CPS12400, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it enters stock. The module you receive is a genuine Schneider Electric part, not a grey-market copy.

What condition will the 140CPS12400 arrive in?

Units ship in refurbished condition as the site default: tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask us to confirm the grade of the specific unit before you order.

How fast can Autronexa ship this power supply module?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability, and we will confirm dispatch timing.

Can I use this module for a redundant supply pair in a Modicon Quantum rack?

Yes. The 140CPS12400 is specified as a redundant power supply type, delivering 5.1 V DC at 8 A in redundant configuration at 60 °C. Confirm your rack configuration with our sourcing team before pairing units.

Is the 140CPS12400 still supported by Schneider Electric?

Lifecycle status is not stated in our current data. Contact Autronexa to verify OEM support status and availability before ordering.

Related & compatible parts

Schneider Electric

ATV310HU30N4E

Genuine surplus Schneider ATV310HU30N4E 3 kW drive — verified condition, tested against OEM specs, ready to ship.

In Stock

Schneider Electric

ATV930D90N4Z

Genuine surplus Schneider ATV930D90N4Z Altivar 930 drive, 90 kW ND/75 kW HD, verified condition and ready to ship.

In Stock

Schneider Electric

ATV71HD45N4

Genuine surplus Schneider ATV71HD45N4 45 kW drive — verified condition, faster than OEM lead times, with sourcing support…

In Stock

Schneider Electric

BMXP3420302CL

Genuine surplus Schneider BMXP3420302CL processor module for Modicon M340 — verified condition, CANopen and Ethernet, ready to ship.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: 140CPS12400

We reply within one business day.

140CPS12400 Quote reply within 1 business day