Schneider Electric Communication Modules

Schneider Electric 140CRA93200

RIO drop adaptor module

Manufacturer: Schneider Electric Part Number: 140CRA93200

Genuine surplus Schneider 140CRA93200 RIO drop adaptor for Modicon Quantum — verified, tested, and ready to ship from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Product Compatibility Quantum
Maximum Number of I/O Expansion Module 27
Type of Cable 75 Ohm coaxial
Transmission Rate 1544 Mbit/s
Electrical Connection 2 female connectors F, elbowed with redundant cable
Isolation Voltage 500 V DC coaxial center and ground
Bus Current Requirement 750 mA 2 channels
Power Dissipation 3.8 W 2 channels
Ambient Air Temperature for Operation 32…140 °F (0…60 °C)

Description

When a Modicon Quantum RIO link drops offline, every minute of unplanned downtime adds cost. The Schneider Electric 140CRA93200 RIO drop adaptor module restores that link with two female F connectors and redundant cable support. Autronexa supplies this genuine surplus unit, verified against OEM datasheet markings, so you get authentic hardware without the OEM lead time.

What This RIO Drop Adaptor Does in a Quantum System

The 140CRA93200 is the remote I/O drop adaptor for the Modicon Quantum automation platform. It sits at the drop end of a coaxial RIO network, receiving the 75 Ohm coaxial cable and presenting the bus to up to 27 I/O expansion modules. Two elbowed female F connectors accept redundant cabling, so a single cable fault does not take the drop offline. The module runs at a 1544 Mbit/s transmission rate with a 35 dB dynamic range, and it provides 500 V DC isolation between the coaxial center and ground. Startup diagnostics cover power-up, runtime, RAM address/data, and executive checksum, which helps you confirm link integrity before returning the line to service. The unit draws 750 mA on the bus and dissipates 3.8 W across two channels, so existing power budgets usually accommodate a direct replacement.

Figure 1: Front view of the Schneider Electric 140CRA93200 RIO drop adaptor module showing its physical design and enclosure.

Why Genuine Surplus Fits This Module

Quantum RIO hardware is often needed to keep existing control cabinets running, not to build new lines. That changes the sourcing calculation. A refurbished unit from Autronexa is tested against OEM datasheet specifications and functionally verified by our sourcing team, so you are not gambling on an untested pull. You avoid OEM list pricing and the lead time that comes with a factory order, while still receiving a genuine part with the original connector layout and isolation ratings intact. For maintenance teams supporting installed Quantum systems, surplus and refurbished stock is often the practical route to getting a drop back online without redesigning the network.

Figure 2: Technical layout and connection details for the Schneider Electric 140CRA93200 RIO drop adaptor module.

Sourcing Checks Before You Order

Confirm three things before committing: the exact part number and revision on your existing module, the condition grade you need (surplus versus refurbished), and whether your cabinet uses redundant or single coaxial cabling. This unit supports redundant cable through its two F connectors, but the field wiring must match. Also verify the ambient operating range for your enclosure — this module is rated for 32…140 °F (0…60 °C) operation and up to 95 % relative humidity without condensation. Autronexa can cross-reference your existing unit and confirm current availability. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: 140CRA93200-datasheet.pdf

Frequently asked questions

Is this 140CRA93200 a genuine Schneider Electric module or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. This is a genuine Schneider Electric RIO drop adaptor, not a grey-market copy.

What condition will the 140CRA93200 arrive in?

Autronexa supplies this module as refurbished by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus condition may also be available — confirm with us before ordering.

How fast can Autronexa ship the 140CRA93200?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability; surplus and refurbished units are typically ready to ship faster than an OEM factory order.

Does the 140CRA93200 support redundant coaxial cable?

Yes. The module has two elbowed female F connectors for 75 Ohm coaxial cable with redundant cable support, so a single cable fault does not drop the RIO link.

Is the 140CRA93200 still supported by Schneider Electric?

Please verify current lifecycle status and availability with Autronexa before ordering. We can confirm OEM support status and propose a verified surplus alternative if needed.

Related & compatible parts

Schneider Electric

BMXDDI6402K

Genuine surplus Schneider Electric BMXDDI6402K Modicon X80 64-channel input module — verified, tested, and ready to ship from…

In Stock

Schneider Electric

BMXP342020

Genuine surplus Schneider BMXP342020 processor module for Modicon M340 — verified condition, faster than OEM lead time.

In Stock

Schneider Electric

ATV310HU75N4S

Genuine surplus Schneider ATV310HU75N4S 7.5 kW drive — verified condition, practical lead times, and sourcing support from Autronexa.

In Stock

Schneider Electric

ATV930D45N4

Genuine surplus Schneider ATV930D45N4 drive — 45 kW ND/37 kW HD, dual-rated, verified condition and ready to ship…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: 140CRA93200

We reply within one business day.

140CRA93200 Quote reply within 1 business day