Schneider Electric Communication Modules

Schneider Electric 140NOM25200C

DIO head-end adaptor

Manufacturer: Schneider Electric Part Number: 140NOM25200C

Genuine surplus Schneider Electric 140NOM25200C DIO head-end adaptor for Modicon Quantum — verified condition, sourcing help, faster than OEM lead times.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Product Line Modicon Quantum
Interfaces 1 Modbus fiber, 1 Modbus RS-232
Transmission Rate 1 Mbps
I/O Words 30 I/32 O
Bus Current Requirement 750 mA
Power Dissipation 4 W
Ambient Operating Temperature 0 to 60 °C
Standards UL 508
EAN 3595861136984

Description

When a Modicon Quantum DIO link drops, every hour of downtime adds cost. The Schneider Electric 140NOM25200C DIO head-end adaptor restores dual Modbus fiber and RS-232 communication at 1 Mbps, and Autronexa supplies it as verified surplus or refurbished stock — tested against OEM datasheet specifications and functionally verified by our sourcing team, so you get a genuine part without waiting on factory lead times.

What This Adaptor Does in a Quantum System

The 140NOM25200C sits at the head of a distributed I/O segment, converting the Quantum backplane’s parallel I/O data into serial Modbus traffic. It carries 30 input words and 32 output words, which is the practical limit for many remote rack configurations. Two separate physical paths are provided: one Modbus fiber port (TX/RX connectors, 820 nm wavelength) and one Modbus RS-232 port on an RJ45 connector. That dual-interface layout matters when a plant runs fiber over long cable runs but keeps a copper RS-232 drop for local maintenance access. The unit draws 750 mA from the bus and dissipates 4 W, so existing power budgets usually accommodate a drop-in replacement without recalculating the rack supply.

Figure 1: Front view of the Schneider Electric 140NOM25200C DIO head-end adaptor showing its physical design and enclosure.

Signal Integrity and Environmental Limits

Fiber links fail for reasons that have nothing to do with the adaptor — dirty connectors, marginal loss budgets, or electrical noise on the copper side. This module’s published optical figures give you a baseline for troubleshooting: power loss budget is 11 dB over 62.5/125 µm fiber, 16.5 dB over 100/140 µm, and 6.5 dB over 50/125 µm. Sensitivity scale is stated as > 30 dBm, and detected silence is -36 dBm. Jitter is held to 5 ns with 20 ns rise/fall times, which keeps timing margins intact on 1 Mbps segments. The conformal coating (Humiseal 1A33) and a 0 to 60 °C operating range suit cabinet environments; storage tolerance extends to -40 to 85 °C. The unit carries UL 508 and CSA Class 1 Division 2 listings, and it is rated for altitudes up to 5000 m.

Figure 2: Technical layout and connection details for the Schneider Electric 140NOM25200C DIO head-end adaptor.

Why Buy Surplus Instead of Waiting on OEM

Schneider Electric has moved much of the Modicon Quantum line through its lifecycle, and new-production availability for specific adaptor variants is not something we can promise. That is exactly where surplus and refurbished stock earns its place: Autronexa holds genuine parts, verified against OEM datasheet markings and part-number cross-reference, with condition stated before you commit. Refurbished units are functionally tested rather than simply boxed and shipped. For a running line, the difference between a verified surplus adaptor and a multi-week factory order is usually the difference between a planned weekend swap and an unplanned outage. Please verify current lifecycle status and availability with Autronexa before ordering.

Sourcing Checklist Before You Order

Confirm the exact part number and any revision suffix on the label of the unit you are replacing — Quantum adaptors are not interchangeable across every DIO configuration. Check whether your segment uses the fiber port, the RS-232 port, or both, and inspect the mating TX/RX connectors and RJ45 for damage before installation. Decide whether your application can accept a refurbished unit or requires surplus in original packaging; both are genuine, but the condition differs. If you are unsure which variant your rack needs, send a photo of the existing module’s label and the rack layout to our sourcing team. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine Schneider Electric 140NOM25200C, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it enters stock. We do not sell grey-market copies. If you need documentation of the verification, request it with your quote.

What condition will the adaptor arrive in?

Our default condition is Refurbished — tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units in original packaging may also be available; state your preference when you request a quote.

How fast can you ship the 140NOM25200C?

Lead time depends on current stock at the time of your request. Contact Autronexa with your part number and required quantity for a confirmed lead time and shipping date.

Does this adaptor work with both the fiber and RS-232 ports at the same time?

The module provides one Modbus fiber interface (TX/RX connectors, 820 nm) and one Modbus RS-232 interface on an RJ45 connector, both rated at 1 Mbps. Confirm your segment's wiring plan against the Quantum installation manual before commissioning.

Is the Modicon Quantum DIO adaptor still supported by Schneider Electric?

Lifecycle status varies by variant and we cannot confirm OEM support from our stock records. Contact Autronexa to verify current OEM support status, or ask us for a verified surplus alternative.

Related & compatible parts

Schneider Electric

140CPS21100

Genuine surplus Schneider Electric 140CPS21100 power supply for Modicon Quantum — verified condition, tested, ready to ship.

In Stock

Schneider Electric

140CPS21400C

Genuine surplus Schneider Electric 140CPS21400C power supply for Modicon Quantum — verified condition, tested, ready to ship.

In Stock

Schneider Electric

140DDI35300

Genuine surplus Schneider Electric 140DDI35300 Modicon Quantum 32-point 24 V DC input module, verified and ready to ship…

In Stock

Schneider Electric

ASMBII004

Genuine surplus Schneider ASMBII004 42 m Modicon Quantum drop cable — RS-485 / Modbus Plus, pre-terminated, verified and…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: 140NOM25200C

We reply within one business day.

140NOM25200C Quote reply within 1 business day