Schneider Electric I/O & Function Modules

Schneider Electric BMXAMO0802

Analog Output Module

Manufacturer: Schneider Electric Part Number: BMXAMO0802

Genuine surplus BMXAMO0802: 8-channel Modicon X80 analog output, 12-bit, verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Channels 8 channels
Signal type Voltage / current
Resolution 12-bit
Accuracy <= 0.25% FS
Isolation Group-to-group isolation
Supply voltage 24 V DC (via backplane)
Power consumption 1.8 W
Operating temperature 0°C to +60°C
Protection rating IP20
Dimensions (H×W×D) 100 × 28 × 93 mm

Description

The BMXAMO0802 is an 8-channel analog output module from Schneider Electric’s Modicon X80 series, used by maintenance and controls teams to drive voltage or current loops in M340 and M580 systems. Genuine surplus stock lets you replace a failed output card without paying OEM list price or waiting on a factory lead time.

What This Output Module Does in Your System

This module converts controller data into eight configurable voltage or current outputs, with 12-bit resolution and accuracy of <= 0.25% FS. That accuracy matters when a loop controls a valve or drive: a tighter error band means less trim work at commissioning and fewer rejected batches downstream. Group-to-group isolation separates output groups, which limits fault propagation between loops and protects the rest of the rack. A module status LED gives front-panel diagnostics without pulling the card. The 40-pin terminal block connection keeps wiring consistent with the existing Modicon X80 platform, so a replacement does not force re-termination of the field harness.

Figure 1: Front view of the Schneider Electric BMXAMO0802 Analog Output Module showing its physical design and enclosure.

Surplus Advantage: Cost and Uptime

A failed analog output card stops the loops it drives, and every hour of downtime adds cost. Buying new from the OEM often means a quoted lead time and full list price. Genuine surplus and refurbished units change that equation: our sourcing team tests each module against OEM datasheet specifications and functionally verifies it before it ships. Because this platform is shared between M340 and M580, demand is steady and surplus units move quickly. The lifecycle status is Active (shared I/O platform for M340 and M580), last verified 2026-09, so support and spares remain available. Choosing verified surplus here typically shortens the replacement cycle and reduces spend versus a new-unit purchase, without accepting an unverified clone.

Figure 2: Technical layout and connection details for the Schneider Electric BMXAMO0802 Analog Output Module.

Sourcing Checklist for This Module

Before you order, confirm the exact model and revision match your rack, and check whether your application needs voltage or current output configuration. Verify the condition grade you are buying: surplus, refurbished, or new. Confirm that your existing 40-pin terminal block and field wiring are compatible, since the module itself does not include the harness. Ask for the test record if your maintenance procedure requires documented verification. Autronexa supplies genuine surplus and refurbished automation components and can cross-reference the part number against OEM markings. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: BMXAMO0802-datasheet.pdf

Frequently asked questions

Is this BMXAMO0802 a genuine Schneider Electric module or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before listing. We supply genuine surplus and refurbished components, not grey-market copies.

What condition will the BMXAMO0802 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available; confirm the grade you need when you request a quote.

How fast can you ship the BMXAMO0802?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability; surplus and refurbished units are ready to ship when in stock.

Does this module work with both M340 and M580 controllers?

Yes. The lifecycle data lists this as an active shared I/O platform for M340 and M580, so the module fits both families. Confirm your rack and terminal block compatibility before ordering.

Is the BMXAMO0802 still supported by Schneider Electric?

Lifecycle status is Active (shared I/O platform for M340 and M580), last verified 2026-09. Contact Autronexa to confirm current OEM support status and availability.

Related & compatible parts

Schneider Electric

ATV310HU40N4S

Genuine surplus Schneider ATV310HU40N4S drive — 4 kW heavy duty, 380–460 V three-phase, Modbus RTU, verified and ready…

In Stock

Schneider Electric

BMXXCAUSBH045

Genuine Schneider BMXXCAUSBH045 Modicon X80 USB programming cable, 4.5 m — verified surplus stock with clear lead times.

In Stock

Schneider Electric

ABFM08S202

Genuine surplus ABFM08S202 cabled connector for Modicon Quantum — 8 channels, 2 m shielded cable, verified condition.

In Stock

Schneider Electric

ATV610C40N4

Genuine surplus ATV610C40N4 from Schneider Electric: 400 kW normal duty, 380...460 V, Modbus, C3 EMC filter. Verified condition,…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: BMXAMO0802

We reply within one business day.

BMXAMO0802 Quote reply within 1 business day