Schneider Electric I/O & Function Modules

Schneider Electric TSXCANCB50

CANopen cable

Manufacturer: Schneider Electric Part Number: TSXCANCB50

Genuine surplus Schneider Electric TSXCANCB50 CANopen cable, 50 m, IP20, UL — verified condition with practical lead times from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Range of Product CANopen
Bus Type CANopen
Accessory Type Connecting cable
Accessory Destination CANopen bus
Cable Length 164.04 ft (50 m)
IP Degree of Protection IP20
Product Certifications UL
Marking CE
Product Weight 7.89 lb(US) (3.58 kg)

Description

The Schneider Electric TSXCANCB50 is a 50 m CANopen standard cable rated IP20 and UL, built to connect devices on a CANopen bus in industrial control cabinets and machinery. Maintenance teams and automation engineers sourcing this length need a genuine cable with known condition, not an unverified substitute — which is where Autronexa’s surplus and refurbished sourcing helps.

What This CANopen Cable Does in a Bus Segment

The TSXCANCB50 is a connection accessory for the CANopen bus, supplied as a single 50 m connecting cable. Its role is straightforward: carry the bus signal and power between nodes across a long run inside a panel or along a machine line. The IP20 rating tells you it is designed for protected indoor environments, not washdown or exposed outdoor routing. The UL listing and IEC 60332-2 flame behaviour are the two compliance markers that matter when the cable runs through cabinets that must satisfy inspection requirements. At 50 m, this is a full-reel-scale length rather than a short jumper, so it suits trunk runs where a single continuous cable reduces the number of joints and the failure points that come with them.

Figure 1: Front view of the Schneider Electric TSXCANCB50 CANopen cable showing its physical design and enclosure.

Surplus and Refurbished, Verified

Long cable runs are often the last item on a bill of materials and the first to delay a rebuild when a distributor shows no stock. Autronexa holds genuine surplus and refurbished Schneider Electric connection accessories, and each unit is checked against the OEM datasheet markings before it is listed. For a cable like this, that means confirming the part number, the 50 m length, and the IP20 and UL markings rather than trusting a label. Refurbished stock is tested against OEM datasheet specifications and functionally verified by our sourcing team. Buyers comparing this against a brand-new distributor order get a practical alternative: verified condition, clear lead times, and a sourcing contact who works with these systems daily.

Figure 2: Technical layout and connection details for the Schneider Electric TSXCANCB50 CANopen cable.

Choosing Between Cable Options

Before ordering, confirm three things. First, the length: This unit is 50 m, and a shorter or longer variant will not match a trunk run measured for this figure. Second, the environment: IP20 suits protected cabinet and panel routing, so do not specify it for washdown or exposed outdoor cable tray. Third, the compliance requirement: UL and IEC 60332-2 are stated for this cable, so check that your inspection standard accepts them. When comparing against generic CANopen cable, the difference is traceability — a branded Schneider Electric part with a known part number is easier to verify at audit than an unbranded reel. Please verify current lifecycle status and availability with Autronexa before ordering.

Frequently asked questions

Is this a genuine Schneider Electric TSXCANCB50, or a copy?

Autronexa verifies units against OEM datasheet markings and part-number cross-reference before listing. The cable is checked for the correct part number, 50 m length, and IP20 and UL markings.

What condition will the cable arrive in?

Our default condition is Refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa if you need surplus condition details for a specific unit.

How fast can you ship the TSXCANCB50?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability.

Does the 50 m length suit a full trunk run?

The cable is supplied as a single 50 m connecting cable for the CANopen bus, so it suits trunk runs where one continuous length is preferred. Confirm your measured route before ordering.

Related & compatible parts

Schneider Electric

ATV71HU75N4

Genuine surplus Schneider ATV71HU75N4 Altivar 71 drive, 7.5 kW, 480 V three-phase, IP20, with integrated EMC filter and…

In Stock

Schneider Electric

BMXAMI0810H

Genuine surplus BMXAMI0810H: 8-channel, 16-bit Modicon X80 analog input module with conformal coating, verified and ready to ship.

In Stock

Schneider Electric

TSXCANCBDD03

Genuine surplus Schneider Electric TSXCANCBDD03 CANopen cordset, 0.3m, IP20, UL — verified and ready to ship.

In Stock

Schneider Electric

ATV71HU30N4

Genuine surplus Schneider ATV71HU30N4 3 kW drive — verified condition, faster than OEM lead time, with sourcing help…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: TSXCANCB50

We reply within one business day.

TSXCANCB50 Quote reply within 1 business day