Schneider Electric Communication Modules

Schneider Electric 170DNT11000

Communication adaptor

Manufacturer: Schneider Electric Part Number: 170DNT11000

Genuine surplus Schneider Electric 170DNT11000 Profibus DP adaptor for Modicon Momentum — verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Communication Protocol Profibus DP
Transmission Rate 9.6 to 12 Mbit/s
Transmission Medium Twisted pair cable
Topology Multidrop and ring
Number of Devices Supported Up to 126
Cable Length Up to 1200 meters
Electrical Connection 1 x 9-pin SUB-D connector
Protection Rating IP20
Operating Temperature 0°C to 60°C
Certifications UL, CSA

Description

When a Modicon Momentum rack loses its Profibus DP link, every downstream device on the segment goes silent. The Schneider Electric 170DNT11000 communication adaptor restores that link — a genuine surplus unit for maintenance teams that need verified condition and a practical alternative to OEM lead times.

What This Adaptor Does in a Momentum System

The 170DNT11000 is a communication adaptor from the Modicon Momentum series. It moves data over Profibus DP at transmission rates from 9.6 to 12 Mbit/s using twisted pair cable, and it supports both multidrop and ring topologies. Addressing is switch-selectable, so you can set the node address on the unit itself rather than through software. The adaptor supports up to 126 devices on the network and cable runs up to 1200 meters, which suits larger installations where the segment spans several cabinets or a long process line.

Figure 1: Front view of the Schneider Electric 170DNT11000 Communication adaptor showing its physical design and enclosure.

Technical Specs That Matter on the Segment

Three values drive most integration decisions here. First, the 9.6 to 12 Mbit/s range lets you match the adaptor to the baud rate your existing Profibus DP segment already runs, so you are not forced to re-engineer the network. Second, the 1200-meter maximum cable length gives layout flexibility across a plant floor. Third, the single 9-pin SUB-D connector is the physical interface you will be cabling to. The unit carries an IP20 protection rating and operates from 0°C to 60°C, with storage from -40°C to 85°C and relative humidity up to 95% without condensation. It is certified to UL and CSA.

Figure 2: Technical layout and connection details for the Schneider Electric 170DNT11000 Communication adaptor.

Why Genuine Surplus Fits This Part

Communication adaptors sit in the middle of a working network, so a clone or a mislabeled unit can cost more in troubleshooting than it saves. Autronexa stocks genuine surplus and refurbished Schneider Electric components, and each unit is verified against OEM datasheet markings and part-number cross-reference before it ships. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. For a part like this, that verification matters: the switch-selectable addressing and the CRC-16 control parameter both need to behave exactly as the datasheet states. If you are comparing against an OEM list price or a long factory lead time, surplus stock is often the faster route. Please verify current lifecycle status and availability with Autronexa before ordering.

Sourcing Checklist Before You Buy

Confirm the exact model number and that your application uses Profibus DP, not another fieldbus. Check whether your segment runs multidrop or ring topology, since the adaptor supports both but your cabling plan should match. Verify the node address range you need fits within the 126-device limit. Decide whether you need surplus or refurbished condition and ask for the grading in writing. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine Schneider Electric 170DNT11000, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it ships. We source genuine surplus and refurbished components, not grey-market copies.

What condition will the 170DNT11000 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available — ask for the specific grading when you request a quote.

How fast can you ship the 170DNT11000?

Contact Autronexa for current lead time. Surplus and refurbished stock is often ready to ship faster than OEM factory lead times, but availability varies by unit.

Does this adaptor work with my existing Profibus DP network?

It supports Profibus DP at 9.6 to 12 Mbit/s over twisted pair cable, in multidrop or ring topology, with up to 126 devices and cable runs up to 1200 meters. Confirm your segment's baud rate and topology match before ordering.

Is the 170DNT11000 still supported by Schneider Electric?

Contact Autronexa to verify OEM support status. We can confirm lifecycle information and availability for this Modicon Momentum adaptor before you order.

Related & compatible parts

Schneider Electric

110-XCA-282-01

Genuine surplus Schneider Electric 110-XCA-282-01 programming cable for M1 systems — 2 m, 24V DC, 2A, verified condition.

In Stock

Schneider Electric

BMXSAI0410

Genuine surplus Schneider Electric BMXSAI0410 safety analog input module — 4 isolated 4...20 mA inputs, verified and ready…

In Stock

Schneider Electric

TM2ALM3LT

Genuine surplus Schneider TM2ALM3LT analog I/O module for M238 — 2 thermocouple/Pt inputs, 1 analog output, verified and…

In Stock

Schneider Electric

TSXMRP0256P

Genuine surplus Schneider Electric TSXMRP0256P RAM memory card for TSX Micro PLCs — 256 kilowords, verified condition, ready…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: 170DNT11000

We reply within one business day.

170DNT11000 Quote reply within 1 business day