Schneider Electric Cables & Connectors

Schneider Electric 170XTS00301

Terminal Connector Kit

Manufacturer: Schneider Electric Part Number: 170XTS00301

Genuine surplus Schneider Electric 170XTS00301 terminal connector kit for Modicon Momentum — verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Product Line Modicon Momentum
Accessory Type Busbar, 3 rows
Terminal Type Spring type terminals
Accessory Destination Discrete I/O base, Analog I/O base
Height 1.42 inches
Width 2.24 inches
Length 5.05 inches
Weight 110 grams
Standard Compliance CE
Ambient Temperature Range 0 to 60 degrees Celsius
Max. Operating Humidity 95% (non-condensing)
Max. Altitude 1000 m above sea level

Description

The Schneider Electric 170XTS00301 terminal connector kit is a genuine surplus component for Modicon Momentum discrete and analog I/O bases, providing a common connection for field devices and protective distribution. Maintenance teams choose verified surplus here because this connector kit is a practical, low-cost wear item that keeps Momentum racks running without OEM lead-time delays.

What This Connector Kit Does in a Momentum System

The 170XTS00301 is a busbar-style connection accessory with three horizontal rows of spring-type terminals. It mounts to discrete I/O bases and analog I/O bases in the Modicon Momentum platform, tying field-device wiring into a common distribution point. The spring terminals accept conductors without screw tightening, which speeds up field wiring and re-termination during maintenance. At 1.42 inches high, 2.24 inches wide, and 5.05 inches long, and weighing 110 grams, the kit fits the standard Momentum base footprint without adding bulk. CE compliance is stated in the datasheet. Because this is a connection accessory rather than an active electronic module, its condition is easy to verify visually and mechanically before dispatch.

Figure 1: Front view of the Schneider Electric 170XTS00301 Terminal Connector Kit showing its physical design and enclosure.

Surplus Advantage for This Momentum Accessory

Terminal connector kits are frequently replaced during panel upgrades, I/O swaps, and machine retrofits, so genuine surplus stock exists in the channel. Buying surplus or refurbished here means you get the correct Schneider Electric busbar assembly rather than a generic terminal block that may not seat properly on the Momentum base. Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference, and refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. For plants maintaining older Momentum installations, this avoids waiting on OEM production schedules for a small but essential connection part. Please verify current lifecycle status and availability with Autronexa before ordering.

Figure 2: Technical layout and connection details for the Schneider Electric 170XTS00301 Terminal Connector Kit.

Buyer’s Checklist Before You Order

Confirm three things before committing. First, match the accessory destination: this kit is specified for discrete I/O bases and analog I/O bases, so check your base model. Second, confirm the terminal style — this unit uses spring-type terminals in three horizontal rows, which must match your field-wiring method. Third, review the environmental ratings against your panel: 0 to 60 degrees Celsius ambient, 95% non-condensing humidity, and up to 1000 m above sea level. Natural cooling is specified, so no active airflow is required at the connector itself. If your application runs near those limits, raise it with our sourcing team before purchase. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this 170XTS00301 a genuine Schneider Electric part or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference. This is a genuine Schneider Electric Modicon Momentum terminal connector kit, not a generic terminal block.

What condition will the terminal connector kit arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available depending on stock. Contact Autronexa for the current condition of specific units.

How fast can you ship the 170XTS00301?

Lead time depends on current stock. Contact Autronexa for current lead time and availability — surplus and refurbished stock is often ready to ship faster than OEM production schedules.

Does this connector kit work with both discrete and analog Momentum I/O bases?

Yes. The datasheet specifies this busbar kit for both discrete I/O bases and analog I/O bases in the Modicon Momentum platform. Confirm your base model with our sourcing team if you are unsure.

Is the 170XTS00301 still supported by Schneider Electric?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability before ordering.

Related & compatible parts

Schneider Electric

ATV71HC25N4

Genuine surplus Schneider ATV71HC25N4 Altivar 71 drive, 220 kW, 380–480 VAC, verified condition and ready to ship.

In Stock

Schneider Electric

170INT11003C

Genuine surplus Schneider 170INT11003C communication adapter for Modicon Momentum — verified condition, 500 kbit/s ring topology, ready to…

In Stock

Schneider Electric

ATV930C11N4

Genuine surplus Schneider Electric ATV930C11N4 drive — 110 kW ND/90 kW HD, dual-rated, built-in braking unit. Verified condition,…

In Stock

Schneider Electric

170AAO12000

Genuine surplus Schneider 170AAO12000 analog output module — 4 channels, 0–20 mA / ±10 V, verified and ready…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: 170XTS00301

We reply within one business day.

170XTS00301 Quote reply within 1 business day