ABB Communication Modules

ABB CI862

Via the CI862 CEX module

Manufacturer: ABB Part Number: CI862

Genuine surplus ABB CI862 CEX module connects up to 30 TRIO blocks per LAN, redundant-capable, for AC 800M controllers.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article Number 3BUA000037R1
Communication Protocol ABB's TRIO/Genius I/O
Master or Slave Master
Max Units on CEX Bus 4
Max TRIO Blocks per LAN 30
Module Redundancy Yes
Hot Swap Yes
24 V Consumption (typ.) 190 mA
Operating Temperature +5 to +55 °C (+41 to +131 °F)
Protection Class IP20 according to EN60529, IEC 529

Description

When a TRIO/Genius I/O segment needs a native interface to an AC 800M controller, the ABB CI862 CEX module is the communication bridge that keeps channel data flowing. Maintenance and procurement teams choose genuine surplus or refurbished units of this module to restore I/O connectivity without waiting on OEM lead times, and Autronexa verifies each unit against OEM datasheet markings before it ships.

What the CI862 Does in an AC 800M Architecture

This unit is a master communication interface that integrates TRIO/Genius I/O as native AC 800M I/O. It manages channel data for the controller and handles I/O configuration and scanning for up to 30 TRIO blocks on a single LAN. An AC 800M can host up to four unit CEX modules, supporting a maximum of 1,000 TRIO/Genius I/O points. The module provides one direct TRIO LAN connection plus a port for the Hand Held Monitor. Module redundancy is supported, and the unit is hot-swappable — a practical advantage when a segment must be serviced without dropping the controller. Connectors include Phoenix (4-pin) and DB9 male and female.

Figure 1: Front view of the ABB CI862 Via the CI862 CEX module showing its physical design and enclosure.

Sourcing This Module Without the OEM Wait

Life cycle status for This unit is Classic, which means new-from-OEM supply can be slow or unavailable depending on channel. That is exactly where genuine surplus and refurbished stock earns its place. Autronexa sources This unit as a verified genuine unit, tests it against OEM datasheet specifications, and functionally verifies it before dispatch. You get a module that matches the original article number 3BUA000037R1, with clear lead times rather than an open-ended factory backlog. For plants running mixed AC 800M and TRIO/Genius installations, keeping a verified spare on the shelf is the difference between a planned swap and an extended outage. Surplus and refurbished, ready to ship — with the condition stated up front.

Figure 2: Technical layout and connection details for the ABB CI862 Via the CI862 CEX module.

Matching This unit to Your Existing Installation

Before ordering, confirm the controller side and the I/O side. On the controller side, verify your AC 800M CEX bus has capacity — the maximum is four unit modules, and each supports one TRIO LAN. On the I/O side, count your TRIO blocks: a single module handles up to 30 per LAN. Decide whether you need module redundancy, since This unit can be set redundant, and confirm the Hand Held Monitor port is required for your maintenance routine. Check the environmental envelope: operating temperature is +5 to +55 °C, storage is -40 to +70 °C, and relative humidity is 5 to 95 % non-condensing. The module is rated IP20 per EN60529 and IEC 529, carries CE marking, and complies with WEEE DIRECTIVE/2012/19/EU. Typical 24 V consumption is 190 mA. Dimensions are 59 mm wide, 185 mm high, and 127.5 mm deep, with a weight of 700 g including base. Please verify current lifecycle status and availability with Autronexa before ordering.

Frequently asked questions

Is this ABB CI862 a genuine module or a clone?

Autronexa verifies each CI862 against OEM datasheet markings and part-number cross-reference, including article number 3BUA000037R1, before it is listed as genuine surplus or refurbished stock.

What condition will the CI862 arrive in?

Units are supplied in the site default condition, Refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa if you need a specific condition grade confirmed before purchase.

How fast can Autronexa ship the CI862?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability; surplus and refurbished units are ready to ship when in stock.

Can the CI862 connect to an AC 800M controller with redundant LANs?

Yes. The CI862 supports module redundancy and can be set redundant. An AC 800M can host up to four CI862 CEX modules, configured as up to four single LANs or four redundant LANs, with a maximum of 1,000 TRIO/Genius I/O points.

Is the CI862 still supported by ABB?

The lifecycle status listed for this module is Classic. Contact Autronexa to verify current OEM support status and availability before ordering.

Related & compatible parts

ABB

PM862K01

Genuine surplus ABB PM862K01 CPU board for AC 800M — verified condition, tested against OEM datasheet specs, ready…

In Stock

ABB

PM858K01

Genuine surplus ABB PM858K01 CPU board for AC 800M — verified condition, practical sourcing support, and faster availability…

In Stock

ABB

CI854A

Genuine surplus ABB CI854A PROFIBUS-DP/V1 master module with 2 channels, line and master redundancy, hot swap — verified…

In Stock

ABB

DI828

Genuine surplus ABB DI828 digital input module — 16 isolated channels, 120V AC/DC, verified and ready to ship.

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: CI862

We reply within one business day.

CI862 Quote reply within 1 business day