ABB Cables & Connectors

ABB DI828

Cable length 200 meters

Manufacturer: ABB Part Number: DI828

Genuine surplus ABB DI828 digital input module — 16 isolated channels, 120V AC/DC, verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article number 3BSE069054R1
Number of channels 16
Signal specification 120 V a.c. / d.c.
Input voltage range, "1" 77..130 V a.c., 75..130 V d.c.
Input impedance 14.2 kΩ (a.c.) / 50 kΩ (d.c.)
Isolation Individually isolated channels
Filter times (selectable) 2,5 ±0.5, 5 ±1, 10 ±2, 20 ±4 ms
Power dissipation Typ. 3.5 W
Operating temperature 0 to +55 °C
Protection class IP20 according to IEC 60529

Description

The ABB DI828 is a 16-channel 120 V a.c./d.c. digital input module for the S800 I/O system, built for maintenance and procurement teams who need reliable signal acquisition without paying OEM list prices or waiting weeks for new stock. Autronexa supplies this module as genuine surplus or professionally refurbished stock, each unit verified against OEM datasheet markings and functionally tested before dispatch.

What the DI828 Does in an S800 I/O Rack

This unit sits in an S800 I/O rack and accepts 16 digital inputs at 120 V a.c. or d.c., with each channel individually isolated. That isolation matters for cost: a fault on one field circuit stays on that channel instead of taking out a whole group, so you replace a single module rather than a rack section. The module uses current-sinking inputs and provides front-panel LEDs for fault, run, warning, and each channel’s 0/1 state — practical diagnostics that cut troubleshooting time on a live panel. Channel 1 can supervise voltage for channels 2–8, and channel 16 for channels 9–15; if the supervised voltage disappears, the module sets a channel error and turns on the warning LED, with the error readable from the ModuleBus. That built-in supervision reduces the need for separate voltage-monitoring relays, which trims both panel cost and wiring labour.

Figure 1: Front view of the ABB DI828 Cable length 200 meters showing its physical design and enclosure.

Technical Specs That Affect Your Cost and Uptime

The input voltage range is 77–130 V a.c. and 75–130 V d.c., so the module tolerates the brownouts and supply sag common on older plant circuits without nuisance trips. Input impedance is 14.2 kΩ (a.c.) / 50 kΩ (d.c.), and the module offers selectable filter times of 2.5 ±0.5, 5 ±1, 10 ±2, and 20 ±4 ms — you can tune response to reject contact bounce rather than replacing the module when a noisy field device causes false counts. Power dissipation is typically 3.5 W, and current consumption from the +5 V ModuleBus is typically 45 mA (max 60 mA), keeping rack power budget predictable. The module pairs with TU851 keying code MTUs and is rated IP20, 0 to +55 °C operating, with CE marking and marine certifications ABS, BV, DNV, and LR. Maximum field cable length is 200 meters for a.c. and 600 meters for d.c. — the d.c. allowance alone can save a repeater or a remote I/O drop on long runs.

Figure 2: Technical layout and connection details for the ABB DI828 Cable length 200 meters.

Surplus and Refurbished: Why It Fits This Module

This unit is a mature S800 I/O part, and new-from-OEM lead times on mature automation hardware can stretch well beyond a planned outage window. Autronexa’s surplus and refurbished route gives you a verified alternative: every unit is checked against OEM datasheet specifications and functionally verified by our sourcing team, so you know the channel count, isolation, and supervision features are intact before it reaches your panel. Because these are genuine parts, verified, you avoid the risk of grey-market clones that may not meet the 2000 V a.c. dielectric test voltage or the EN 61010 safety standards the original carries. For maintenance managers, the practical gain is shorter downtime and a lower cost per spare than OEM list — and you can hold a verified spare on the shelf instead of gambling on a single source. Please verify current lifecycle status and availability with Autronexa before ordering.

Sourcing Checklist Before You Buy

Confirm the exact article number 3BSE069054R1 and that your rack uses the S800 mechanics with TU851 keying code MTUs — mismatched MTUs are the most common reason a replacement module will not seat. Decide whether you need surplus or refurbished condition and ask for the condition grade in writing. Check that your field wiring matches the current-sinking input type and that your supervision scheme uses channel 1 or 16 as intended. Autronexa can cross-reference your existing module and confirm compatibility before shipment; contact us with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB DI828, or a clone?

Autronexa verifies every DI828 against OEM datasheet markings and part-number cross-reference (article number 3BSE069054R1) before it enters stock. We do not supply grey-market copies.

What condition will the DI828 arrive in?

Units ship in the condition stated on your quote — typically refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask for the condition grade in writing.

How fast can you ship the DI828?

Lead time depends on current stock. Contact Autronexa with your required quantity and we will confirm current availability and dispatch timing.

Does the DI828 work with my existing S800 rack?

The module uses S800 mechanics and TU851 keying code MTUs. Confirm your rack and MTU match before ordering; Autronexa can cross-reference your existing module.

Is the DI828 still supported by ABB?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability before you commit.

Related & compatible parts

ABB

FENA-21

Genuine ABB FENA-21 dual-port Ethernet adapter for drives — PROFINET IO, EtherNet/IP, Modbus TCP. Verified surplus, ready to…

In Stock

ABB

AI810

Genuine surplus ABB AI810 analog input module — 8 channels, 12-bit, verified condition, ready to ship from Autronexa.

In Stock

ABB

DO571

Genuine surplus ABB DO571 S500-eCo digital output module — 8 relay outputs, verified condition, faster lead time than…

In Stock

ABB

AI931B

ABB AI931B I/O & Function Modules. Signal type: 4...20 mA; Mechanics: S900. Number of channels is 4. New…

Available on request

News & guides for ABB

View all articles

Request a quote for this part

Part number: DI828

We reply within one business day.

DI828 Quote reply within 1 business day