ABB Cables & Connectors

ABB TB807

Modulebus Terminator 3BSE008538R1

Manufacturer: ABB Part Number: TB807

Genuine surplus ABB TB807 Modulebus terminator, verified and ready to ship — practical alternative to OEM lead times.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article Number 3BSE008538R1
Mechanics S800
Function Passive Modulebus termination
Operating Temperature 0 to +55 °C
Storage Temperature -25 to +70 °C
Relative Humidity 5 to 95 % no condensation
Protection Class IP20 according to IEC 60529
Corrosion Protection ISA-S71.04: G3
Dimensions (W x D x H) 17 mm x 13 mm x 19 mm
Weight 10 g

Description

When a Modulebus segment needs proper termination, a missing or failed terminator can take the whole bus down and stall commissioning or restart. The ABB TB807 Modulebus Terminator 3BSE008538R1 is the passive end-of-line unit that closes the segment correctly, and sourcing a genuine unit quickly keeps maintenance and start-up schedules intact.

What the TB807 Does on the Modulebus

This unit is a passive termination unit for the Modulebus, built in ABB’s S800 mechanics. It carries no active electronics — its job is to terminate the bus segment so signal integrity is maintained at the physical layer. Because it is passive, there is little to wear out, but a missing, loose, or incorrect terminator is a common cause of intermittent bus faults that are hard to trace. The unit measures just 17 mm wide, 13 mm deep and 19 mm high and weighs 10 g, so it fits into dense S800 cabinet layouts without consuming meaningful panel space. Its IP20 protection class per IEC 60529 suits it to inside-enclosure installation, and the corrosion protection rating of ISA-S71.04: G3 covers the moderate industrial atmospheres typical of control rooms and cabinet interiors.

Figure 1: Front view of the ABB TB807 Modulebus Terminator 3BSE008538R1 showing its physical design and enclosure.

Surplus Advantage for This Terminator

Terminators are small, low-cost parts that are easy to overlook in spares planning — until a segment is down and the OEM route means a line-item order and a lead-time queue. Autronexa holds genuine surplus and refurbished ABB units, and each unit is checked against OEM datasheet markings and functionally verified before it ships. That gives maintenance teams a practical alternative to waiting on a factory order for a part this small. Because the unit is passive, condition verification is straightforward: our sourcing team confirms part-number identity, housing integrity, and terminal condition. If you are comparing against brand-new distributor pricing, ask us for current availability — surplus and refurbished stock is often the faster route for legacy S800 installations.

Figure 2: Technical layout and connection details for the ABB TB807 Modulebus Terminator 3BSE008538R1.

Selection and Sourcing Checks

Before ordering, confirm the exact article number on your existing unit reads 3BSE008538R1, since Modulebus termination parts can look similar across ABB families. Decide whether you need surplus or refurbished condition and state it in your request so we can match stock accurately. Check that the replacement matches the S800 mechanics used in your cabinet and that the enclosure environment stays within the 0 to +55 °C operating range and 5 to 95 % relative humidity without condensation. This unit carries CE marking, IEC 61131-2 and UL 61010 electrical safety approvals, and ATEX Zone 2 and marine certifications, so it suits both standard panels and the more regulated installations listed in its datasheet. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB TB807, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. The article number 3BSE008538R1 is confirmed on the unit, and we do not source grey-market copies.

What condition will the TB807 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available depending on stock — state your preference when you request a quote.

How fast can you ship the TB807?

Lead time depends on current stock. Contact Autronexa for the current lead time and availability for this article number before placing your order.

Does the TB807 suit hazardous-location panels?

The datasheet lists ATEX Zone 2, C1 Div 2 cULus and C1 Zone 2 cULus approvals, along with marine certification from ABS, BV, DNV and LR. Confirm your specific installation requirements against the datasheet before ordering.

Is the TB807 still supported by ABB?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability before you plan a replacement.

Related & compatible parts

ABB

AI910N

Genuine surplus ABB AI910N analog input module for S900 I/O — 4 channels, 4...20 mA, G3 coating, verified…

In Stock

ABB

SC520

Genuine surplus ABB SC520 submodule carrier with local CPU — verified condition, practical lead times, and sourcing help…

In Stock

ABB

CI873A

Genuine surplus ABB CI873A AC 800M communication interface — verified, tested, and ready to ship with sourcing support…

In Stock

ABB

DI820

Genuine surplus ABB DI820 digital input module — 8 isolated channels, 120 V a.c./110 V d.c., verified condition…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: TB807

We reply within one business day.

TB807 Quote reply within 1 business day