ABB Communication Modules

ABB CI867A

Application-layer messaging protocol

Manufacturer: ABB Part Number: CI867A

Genuine surplus ABB CI867A Modbus TCP module for AC 800M — verified, tested, and ready to ship from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article number 3BSE092689R1
Communication protocol MODBUS TCP
Master or slave Master/Slave
Number of channels 1 channel
Transmission speed 10/100 Mbit/s (Ch1)
Module redundancy Yes
Hot Swap Yes
Max units on CEX bus 12
Connector RJ-45 female (8-pin)
Operating temperature +5 to +55 °C (+41 to +131 °F)

Description

When a Modbus TCP link between an AC 800M controller and external Ethernet devices fails, every hour of downtime adds cost. Sourcing a genuine ABB CI867A fast matters. This single-channel Ethernet module supports master/slave functionality and hot swap, so you can restore communication without a full rack shutdown. Autronexa supplies verified surplus and refurbished units, giving you a practical alternative to OEM lead times and list prices.

What the CI867A Does in an AC 800M System

This unit is an application-layer messaging protocol module positioned at level 7 of the OSI model. It connects an AC 800M controller to external Ethernet devices using Modbus TCP, combining Modbus RTU with standard Ethernet and TCP. The expansion unit contains CEX-Bus logic, a communication unit, and a DC/DC converter that derives appropriate voltages from the +24 V supply via the CEX-Bus. One Ethernet port runs at 100 Mbit/s — a change from the earlier CI867, which offered two ports at 100 Mbit/s and 10 Mbit/s. The module works only with System 800xA 6.0.3.3, 6.1.1, and subsequent versions. For plants running these system versions, This unit is the correct fit; mismatched firmware wastes both capital and commissioning time.

Figure 1: Front view of the ABB CI867A Application-layer messaging protocol showing its physical design and enclosure.

Technical Specs That Affect Cost and Efficiency

Each specification on this module carries a direct cost or efficiency implication. The single channel supports full duplex at 100 Mbps and handles both master and slave roles, so one unit can serve either side of a Modbus TCP conversation — reducing the number of modules you need to stock. A maximum of 70 slave and 8 master units per unit means you can scale connected devices without adding hardware, which lowers per-point integration cost. Module redundancy is supported and hot swap is enabled, allowing replacement without shutting down the controller — a direct saving on production downtime. The RJ-45 female connector and CEX-Bus interface keep cabling standard, avoiding custom adapter expenses. Operating temperature range of +5 to +55 °C and IP20 protection suit controlled cabinet environments, so no costly enclosure upgrades are required.

Surplus Advantage: Genuine Parts, Verified

OEM lead times for legacy ABB modules can stretch weeks, and list prices for new stock may not fit a maintenance budget. Autronexa maintains surplus and refurbished stock of This unit, each unit tested against OEM datasheet specifications and functionally verified by our sourcing team. Because the module is often requested for System 800xA 6.0.3.3 and 6.1.1 installations, we keep practical availability. Refurbished units arrive with clear condition notes, and we confirm current lifecycle status before you order. For maintenance managers comparing grey-market vendors, the difference is traceability: every unit we ship carries verified markings and part-number cross-reference. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB CI867A, or a clone?

Autronexa verifies every CI867A against OEM datasheet markings and part-number cross-reference. We supply genuine surplus and refurbished units, not grey-market clones.

What condition will the CI867A arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available; condition is confirmed before shipment.

How fast can you ship the CI867A?

Lead time depends on current stock. Contact Autronexa for current availability and lead time — we confirm before you order.

Does the CI867A work with my AC 800M controller?

The CI867A connects an AC 800M controller to external Ethernet devices using Modbus TCP. It works only with System 800xA 6.0.3.3, 6.1.1, and subsequent versions. Confirm your system version with Autronexa before ordering.

Is the CI867A still supported by ABB?

Lifecycle status varies. Contact Autronexa to verify OEM support status and current availability for your specific application.

Related & compatible parts

ABB

SD831

Genuine surplus ABB SD831 power supply: 24 V DC, 3 A, 72 W, DIN-rail mount. Verified condition, faster…

In Stock

ABB

AO845A

Genuine surplus ABB AO845A analog output module: 8 channels, 4-20 mA, HART pass-through, redundancy-ready. Verified condition and sourcing…

In Stock

ABB

DI821

Genuine surplus ABB DI821 digital input module for S800 I/O — 8 isolated channels, 230 V a.c./220 V…

In Stock

ABB

DO880

Genuine surplus ABB DO880 16-channel digital output module, verified and ready to ship for S800 systems.

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: CI867A

We reply within one business day.

CI867A Quote reply within 1 business day