ABB I/O & Function Modules

ABB DO880

Switches without pulsing on outputs

Manufacturer: ABB Part Number: DO880

Genuine surplus ABB DO880 16-channel digital output module, verified and ready to ship for S800 systems.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Signal specification 24 V d.c. (19.2 - 32 V d.c.), 0.5 A
Number of channels 16
Signal type Current sourcing, current limiting
Redundancy Yes
Isolation Groupwise isolated from ground
Maximum field cable length 600 meters (656 yards)
Operating temperature 0 to +55 °C (+32 to +131 °F)
Protection class IP20 according to IEC 60529
Dimensions (W x D x H) 45 mm x 102 mm x 119 mm
Weight 0.20 kg (0.44 lbs.)

Description

When a digital output module fails in a running S800 system, every hour of downtime adds pressure to maintenance and production schedules. The ABB DO880 is a 16-channel 24 V d.c. digital output module for single or redundant applications, and sourcing a genuine unit quickly keeps your process online. Autronexa supplies verified surplus and refurbished units with practical sourcing support.

What the DO880 Delivers in an S800 System

This unit handles current-sourcing digital outputs in one isolated group, with a maximum continuous output current of 0.5 A per channel. Each channel uses a current-limited, over-temperature-protected high-side driver with EMC protection and inductive load suppression. The module supports loop monitoring and supervision of short and open load with configurable limits, and it diagnoses output switches without pulsing on outputs. Front LEDs show fault, run, warning, and channel status. For engineers maintaining normally energized channels, degraded mode is supported from unit PR:G. The unit is certified for SIL3 according to IEC 61508 and Category 4 according to EN 954-1, with fault tolerance of 1 for output drivers.

Figure 1: Front view of the ABB DO880 Switches without pulsing on outputs showing its physical design and enclosure.

Surplus Advantage: Verified Genuine Parts, Faster Than OEM

OEM lead times on S800 modules can stretch while a line waits. Autronexa keeps genuine surplus and refurbished unit units in stock, each tested against OEM datasheet specifications and functionally verified by our sourcing team. You get a verified part with clear lead times, not a grey-market unknown. The module is RoHS compliant under DIRECTIVE/2011/65/EN (EN 50581:2012), and its corrosion protection rating of ISA-S71.04: G3 suits industrial cabinets where airborne contaminants are a concern. For maintenance teams comparing against brand-new distributor pricing, refurbished stock offers a practical cost alternative without sacrificing authenticity. Contact Autronexa with your part number for verified condition and current availability.

Sourcing Guide: Matching This unit to Your System

Before ordering, confirm your MTU compatibility. This unit works with TU810, TU812, TU814, TU830, TU833, TU842, TU843, TU852, and TU810V1, and the keying code is FE. Verify whether your application runs single or redundant configuration, since the module supports both. Check that your field wiring stays within the 600-meter maximum field cable length and that loop supervision settings match your process requirements. Ask for the article number 3BSE028602R1 when requesting a quote. Because lifecycle status can change, please verify current lifecycle status and availability with Autronexa before ordering. Our team can cross-reference markings and confirm the exact variant you need.

Frequently asked questions

Is this a genuine ABB DO880, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. We supply genuine surplus and refurbished ABB modules, not copies.

What condition will the DO880 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact us for specific condition details on current stock.

How fast can you ship the DO880?

Lead time depends on current stock. Contact Autronexa for current lead time and availability before ordering.

Which MTUs work with the DO880?

The DO880 is compatible with TU810, TU812, TU814, TU830, TU833, TU842, TU843, TU852, and TU810V1. Confirm your MTU and keying code FE before installation.

Is the DO880 still supported by ABB?

Lifecycle status can vary. Contact Autronexa to verify OEM support status and current availability for your configuration.

Related & compatible parts

ABB

V18345-1010421001

Genuine surplus ABB TZIDC electro-pneumatic positioner, double acting fail safe, 4–20 mA input, IP65/NEMA 4X. Verified condition, ready…

In Stock

ABB

CI869

Genuine surplus ABB CI869 AC 800M communication interface for AF 100 — verified condition, tested, and ready to…

In Stock

ABB

PM891K01

Genuine surplus ABB PM891K01 processor unit for 800xA 6.0.2+ — verified condition, 450 MHz, 256 MB, ready to…

In Stock

ABB

AI531

Genuine surplus ABB AI531 analog input module — 8 channels for U, I, RTD, R, TC and DI,…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: DO880

We reply within one business day.

DO880 Quote reply within 1 business day