ABB I/O & Function Modules

ABB CI920AN

Sturdy

Manufacturer: ABB Part Number: CI920AN

Genuine surplus ABB CI920AN communication interface for S900 I/O — PROFIBUS DP-V1, verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article number 3BDH000692R1
Signal type Communication interface
Fieldbus protocol PROFIBUS DP-V1 (IEC 61158)
HART Yes
Redundancy Yes
Intrinsic safety No
Mechanics S900
Max ambient temperature -20 °C...60 °C
Dimensions (W x D x H) 20 mm x 104 mm x 104 mm
Weight 0.13 kg (0.29 lbs.)

Description

When a PROFIBUS DP-V1 link between an S900 I/O system and the control level fails, every minute of downtime counts. The ABB CI920AN communication interface (article number 3BDH000692R1) is the genuine module that restores that link — and Autronexa supplies verified surplus and refurbished units with practical lead times.

What This Communication Interface Does in an S900 System

The CI920AN is a type N communication interface for the ABB S900 I/O system, intended for installation in safe (non-hazardous) areas. It couples the internal CAN bus of the I/O system to the external PROFIBUS DP-V1 fieldbus per IEC 61158, handling diagnosis, configuration and parameterization over that same bus. The module supports HART over PROFIBUS DP-V1 and provides electrical isolation between fieldbus and power. Redundancy is supported for both power and communication, and the unit allows hot configuration in run and hot swap, so maintenance work does not require interrupting the primary voltage. All components carry G3-coating for corrosive atmospheres rated ISA-S71.04 G3.

Figure 1: Front view of the ABB CI920AN Sturdy showing its physical design and enclosure.

Why Genuine Surplus Fits This Module

This interface is a single point of failure for the fieldbus link, so buyers rarely want to gamble on unverified stock. Autronexa sources surplus and refurbished S900 components and verifies each unit against OEM datasheet markings and part-number cross-reference before it ships. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. For a module with this much configuration and diagnostic responsibility, that verification matters more than a low price. Where OEM lead times stretch, a verified surplus unit keeps a maintenance window on schedule.

Figure 2: Technical layout and connection details for the ABB CI920AN Sturdy.

Sourcing Checks Before You Order

Confirm the firmware version of any replacement. ABB specifies that unit units used for redundancy on PROFIBUS DP-V1 must run the same firmware — observe the Release Notes. Verify that your application is the type N variant for safe-area installation, and check whether your system uses line or media redundancy via two coupling modules. The module measures 20 mm wide, 104 mm deep and 104 mm high, and weighs 0.13 kg. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB CI920AN, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before shipping. The article number 3BDH000692R1 is checked on the unit itself.

What condition will the CI920AN arrive in?

Units ship in the condition stated at the time of order, typically refurbished and tested against OEM datasheet specifications, or surplus as available. Confirm the exact condition with Autronexa before ordering.

How fast can you ship the CI920AN?

Lead time depends on current stock. Contact Autronexa for the current lead time and availability for your required quantity.

Does the CI920AN work with PROFIBUS DP-V1?

Yes. The module is specified for PROFIBUS DP-V1 per IEC 61158 and couples the S900 internal CAN bus to that fieldbus. For redundancy, use units with the same firmware and observe the Release Notes.

Is the CI920AN still supported by ABB?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability before ordering.

Related & compatible parts

ABB

07DI92

Genuine surplus ABB 07DI92 digital input module — 32 isolated 24 V DC inputs for CS31 bus systems,…

In Stock

ABB

AI523

Genuine surplus ABB AI523 S500 analog input module — 16 channels for U, I, RTD and DI signals,…

In Stock

ABB

AI931S

Genuine surplus ABB AI931S analog input module — 4-channel 4...20 mA, HART, ATEX Zone 1, verified condition and…

In Stock

ABB

TU860

Genuine surplus ABB TU860 Ethernet MTU for S800 I/O — verified, tested, and ready to ship with sourcing…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: CI920AN

We reply within one business day.

CI920AN Quote reply within 1 business day