ABB I/O & Function Modules

ABB DO840

Digital Output Module

Manufacturer: ABB Part Number: DO840

Genuine surplus ABB DO840 digital output module, 16 channels, 24 V d.c., 0.5 A — verified condition with fast lead times.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Signal specification 24 V d.c. (19.2 - 32 V d.c.), 0.5 A
Number of channels 16
Signal type Current sourcing, current limiting
Isolation Groupwise isolated from ground
Corrosion protection ISA-S71.04: G3
Operating temperature 0 to +55 °C (+32 to +131 °F)
Protection class IP20 according to IEC 60529
Weight 0.15 kg (0.33 lbs.)
RoHS compliance DIRECTIVE/2011/65/EN (EN 50581:2012)

Description

The ABB DO840 is a 16-channel digital output module for S800 I/O systems, used by maintenance and automation teams to drive 24 V d.c. current-sourcing loads such as relays, solenoids and indicators. Genuine surplus and refurbished units give you a verified alternative to OEM lead times without paying full list price.

What the DO840 Does in an S800 System

The module sits in the S800 I/O family and connects through a compatible MTU base. Its outputs are split into two isolated groups of eight, each with a process voltage supervision input, so a fault in one group does not take down the other. Every channel uses a current-limited, over-temperature-protected high-side driver with inductive load suppression and optical isolation. Front LEDs show F, R, W, OSP and channel 1–16 status, and the OSP function sets outputs to a predetermined state when an error is detected. The module supports redundant or single configurations. The signal specification is 24 V d.c. (19.2 – 32 V d.c.) at 0.5 A per channel, and the keying code is CE. Rated insulation voltage is 50 V, dielectric test voltage 500 V a.c., and maximum field cable length is 600 meters (656 yards).

Figure 1: Front view of the ABB DO840 Digital Output Module showing its physical design and enclosure.

Technical Specs Breakdown

Three values matter most when you specify this module. The 24 V d.c. (19.2 – 32 V d.c.) signal specification at 0.5 A per channel sets the load budget for each output. Corrosion protection to ISA-S71.04: G3 suits control rooms and cabinets where airborne contaminants are a concern. RoHS compliance under DIRECTIVE/2011/65/EN (EN 50581:2012) confirms the module meets current substance restrictions. Operating temperature is 0 to +55 °C (+32 to +131 °F), with approvals issued for +5 to +55 °C. The module is IP20 according to IEC 60529 and weighs 0.15 kg (0.33 lbs.).

Surplus Advantage and Sourcing Guide

Autronexa stocks genuine surplus and refurbished ABB S800 modules, and each unit is tested against OEM datasheet specifications and functionally verified by our sourcing team. That means you get a genuine part, verified, without the long lead time of a factory order. Before you buy, confirm the exact article number 3BSE020838R1, the MTU you will pair it with (TU810, TU812, TU814, TU830, TU833, TU842, TU843, TU852 or TU810V1), and whether you need a surplus or refurbished unit. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB DO840, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it enters stock. The DO840 carries article number 3BSE020838R1, and we confirm that marking on each module.

What condition will the DO840 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available when stock allows — ask us to confirm the condition of the specific unit before you order.

How fast can you ship the DO840?

Lead time depends on current stock. Contact Autronexa for the current lead time and availability of this module before placing your order.

Which MTUs work with the DO840?

The module is compatible with MTU types TU810, TU812, TU814, TU830, TU833, TU842, TU843, TU852 and TU810V1. Confirm your MTU model before ordering so the keying code CE matches your installation.

Is the DO840 still supported by ABB?

Lifecycle status is not stated in our current data. Contact Autronexa to verify OEM support status and availability before you commit to a replacement plan.

Related & compatible parts

ABB

SD834

Genuine surplus ABB SD834 power supply, 24 V d.c. 20 A, 480 W, DIN-rail. Verified condition and clear…

In Stock

ABB

TB846

Genuine surplus ABB TB846 Modulebus inlet module — verified condition, clear lead times, and sourcing help from Autronexa.

In Stock

ABB

AO810

Genuine surplus ABB AO810 analog output module with 8 channels, 14-bit resolution, and open-circuit diagnostics — verified and…

In Stock

ABB

V18345-1020521001

Genuine surplus ABB TZIDC electro-pneumatic positioner with HART, IP65 aluminium case, double-acting fail-freeze output — verified and ready…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: DO840

We reply within one business day.

DO840 Quote reply within 1 business day