ABB I/O & Function Modules

ABB DO890

Digital Output 4x1 ch

Manufacturer: ABB Part Number: DO890

Genuine surplus ABB DO890 digital output module with intrinsic safety — verified, refurbished, and ready for hazardous-area I/O.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Signal specification 11 V, 40 mA
Number of channels 4
Output load 100 – 5000 Ω
Isolation Individually isolated, channel-to-channel and to circuit common ground
Intrinsic safety Yes
Hazardous location ATEX/IECEx Zone 2 with interface to Zone 0; cFMus C1, Div 2/Zone 2 with interface to C1, C2, C3 Div 1/Zone 0
Operating temperature 0 to +55 °C (+32 to +131 °F)
Protection class IP20 according to IEC 60529
Dimensions (W x D x H) 45 mm x 102 mm x 119 mm
Weight 0.2 kg (0.44 lbs.)

Description

When Intrinsic Safety Is Non-Negotiable

Consider a process skid where four Ex-certified solenoid valves must be driven directly from a control cabinet in a Zone 2 area, with field wiring extending into Zone 0. The engineering challenge is not the logic — it is delivering 11 V at 40 mA per channel through an intrinsically safe barrier without adding external isolators that consume panel space and introduce another failure point. The ABB DO890 Digital Output 4×1 ch solves that by integrating Intrinsic Safety protection components on every channel, so each output can connect to process equipment in hazardous areas without additional external devices. For maintenance and procurement teams, this means fewer components to verify, fewer wiring interfaces to document, and a shorter path from spare-parts request to a working output card.

Figure 1: Front view of the ABB DO890 Digital Output 4x1 ch showing its physical design and enclosure.

What the S800 Module Delivers

The DO890 is an S800-mechanics digital output module with four channels, each rated for 11 V and 40 mA into a field load of 100–5000 Ω. That current envelope suits Ex-certified solenoid valves, alarm sounders, and indicator lamps — the typical actuators on a safety-instrumented or hazardous-area skid. All four channels are galvanically isolated channel-to-channel and from the ModuleBus and power supply, and the output stages are short-circuit proof with current limiting. Per-channel diagnostics cover open and short circuit detection, with front LEDs for fault, run, warning, OSP, and channel status. The module carries CE marking, ATEX/IECEx Zone 2 with interface to Zone 0, cFMus Class I Div 2/Zone 2 with interface to Class I, II, III Div 1/Zone 0, and marine certification from ABS, BV, DNV, and LR. It operates from 0 to +55 °C and is rated IP20.

Figure 2: Technical layout and connection details for the ABB DO890 Digital Output 4x1 ch.

Surplus Sourcing for a Safety-Critical Output Card

New-build lead times on S800 I/O modules can stretch well beyond a planned maintenance window, and a single missing output card can hold an entire skid in commissioning. Autronexa stocks genuine surplus and refurbished ABB S800 components, including this digital output module, with each unit tested against OEM datasheet specifications and functionally verified by our sourcing team. Because This unit includes intrinsic safety components, condition verification matters more than on a standard I/O card — our team checks channel isolation, output load behavior, and diagnostic LED function before release. Pair it with the correct MTU: TU890 for Ex applications and TU891 for non-Ex applications, both of which allow two-wire connections to process devices without additional terminals. Keying code AB applies. Please verify current lifecycle status and availability with Autronexa before ordering, and contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB DO890, or a clone or copy?

Every DO890 we supply is verified against OEM datasheet markings and part-number cross-reference. Autronexa sources genuine surplus and refurbished ABB S800 components only — no grey-market clones.

What condition will the DO890 arrive in?

Our default condition is Refurbished: each unit is tested against OEM datasheet specifications and functionally verified by our sourcing team, including channel isolation and diagnostic LED checks. Contact Autronexa if you require a specific condition grade.

How fast can you ship the DO890?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability — surplus and refurbished units are ready to ship once verified.

Does the DO890 work with TU890 and TU891 MTUs?

Yes. The module is designed for use with the TU890 Compact MTU for Ex applications and the TU891 for non-Ex applications, both enabling two-wire connections to process devices without additional terminals. Keying code AB applies.

Is the DO890 still supported by ABB?

Lifecycle status is not stated in our current data. Please verify current lifecycle status and availability with Autronexa before ordering.

Related & compatible parts

ABB

AI880A

Genuine surplus ABB AI880A: 8-channel high-integrity analog input module, SIL3 certified, verified condition, ready to ship.

In Stock

ABB

V18345-1010421001

Genuine surplus ABB TZIDC electro-pneumatic positioner, double acting fail safe, 4–20 mA input, IP65/NEMA 4X. Verified condition, ready…

In Stock

ABB

SC520

Genuine surplus ABB SC520 submodule carrier with local CPU — verified condition, practical lead times, and sourcing help…

In Stock

ABB

CI862

Genuine surplus ABB CI862 CEX module connects up to 30 TRIO blocks per LAN, redundant-capable, for AC 800M…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: DO890

We reply within one business day.

DO890 Quote reply within 1 business day