ABB Power Supplies

ABB SD833

Power Supply Units

Manufacturer: ABB Part Number: SD833

Genuine surplus ABB SD833 power supply: 24 V DC, 10 A, 240 W, DIN-rail, SELV/PELV. Verified condition and current availability from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Rated output voltage 24 V DC
Rated output current 10 A
Rated output power 240 W
Nominal input voltage 100–120 V a.c. / 200–240 V a.c. auto-select
Mains frequency 50–60 Hz ± 6%
Efficiency 91/91.6 %
Protection rating IP20 according to IEC 60529
Dimensions (W × D × H) 60 mm × 117 mm × 124 mm
Weight 700 g

Description

How do you keep a 24 V DC control circuit alive when the original power supply is no longer on the shelf? The ABB SD833 power supply unit answers that question for maintenance and procurement teams running ABB automation: a 24 V DC, 10 A, 240 W switch-mode supply in a DIN-rail housing, available through Autronexa as genuine surplus and refurbished stock with verified condition.

What the SD833 Does in a Control Cabinet

This unit converts mains voltage to a regulated 24 V DC output. Its auto-select input accepts 100–120 V a.c. or 200–240 V a.c., so the same unit covers both common industrial mains ranges. Rated output is 10 A at 24 V DC (240 W), with a maximum output current of 12 A at ambient temperatures below 45 °C. The secondary circuit is accepted for SELV and PELV applications, and protective separation keeps the primary and secondary circuits isolated. A soft-start feature prevents power-on from tripping fuses or earth-fault circuit breakers. The output is protected against over current (current limit) and over voltage (OVP), with OVP clamping below 39 V. Efficiency is 91/91.6 %, and heat dissipation is 24/22 W. The unit mounts on DIN rail with 60 mm width, 117 mm depth and 124 mm height, and weighs 700 g.

Figure 1: Front view of the ABB SD833 Power Supply Units showing its physical design and enclosure.

Why Genuine Surplus Makes Sense Here

OEM lead times on industrial power supplies can stretch when a specific article number is in short supply. Autronexa stocks surplus and refurbished ABB units so you can close a maintenance gap without waiting on a factory backlog. Every unit we list is tested against OEM datasheet specifications and functionally verified by our sourcing team before it ships. The part carries CE marking, electrical safety to IEC 61131-2, UL 508 and EN 50178, marine certification to DNV-GL and ABS, and RoHS compliance under DIRECTIVE/2011/65/EU. Refurbished units give you the same electrical performance at a fraction of the new-list price, and surplus stock often means immediate availability. If you need a redundant configuration, note that diode voting units SS823 or SS832 are required — confirm those separately with your supplier.

Sourcing Checklist Before You Order

Match the article number 3BSC610066R1 exactly; ABB power supplies share a family look but differ in output current and voltage. Confirm whether you need a non-redundant or redundant setup, because the latter changes the external wiring and diode voting hardware. Check the ambient temperature at the mounting location: the full 12 A maximum output current applies below 45 °C, and the maximum ambient temperature is 55 °C. Verify the primary fuse recommendation of 10–20 A against your panel design. This unit needs no external mains filter, which simplifies retrofit work. For SELV or PELV circuits, confirm the protective separation requirements of your installation. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB SD833, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. The SD833 carries CE marking and electrical safety approvals to IEC 61131-2, UL 508 and EN 50178, and we check those markings before listing.

What condition will the SD833 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units may also be available — contact Autronexa for the current condition of stock.

How fast can you ship the SD833?

Lead time depends on current stock. Contact Autronexa for current lead time and availability; surplus and refurbished units are often ready to ship.

Can the SD833 be used in a redundant configuration?

Yes, but redundant applications require diode voting units SS823 or SS832. The SD833 itself supports both non-redundant and redundant use — confirm the voting hardware separately with your supplier.

Is the SD833 still supported by ABB?

Contact Autronexa to verify OEM support status. We can confirm current lifecycle information and availability before you order.

Related & compatible parts

ABB

TU890

Genuine surplus ABB TU890 MTU for S800 I/O — verified condition, 8 channels, intrinsic-safety ready, ready to ship…

In Stock

ABB

V18345-2010521001

Genuine surplus ABB TZIDC positioner, 4–20 mA two-wire, double-acting fail-freeze, 1.7 kg, verified and ready to ship.

In Stock

ABB

AI910N

Genuine surplus ABB AI910N analog input module for S900 I/O — 4 channels, 4...20 mA, G3 coating, verified…

In Stock

ABB

AI531

Genuine surplus ABB AI531 analog input module — 8 channels for U, I, RTD, R, TC and DI,…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: SD833

We reply within one business day.

SD833 Quote reply within 1 business day