ABB Cables & Connectors

ABB TU890

Module Termination UNIT

Manufacturer: ABB Part Number: TU890

Genuine surplus ABB TU890 MTU for S800 I/O — verified condition, 8 channels, intrinsic-safety ready, ready to ship from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article Number 3BSC690075R1
Channels 8
Voltage 24 V
Maximum Current per I/O Channel 2 A
Process Connections 27 blue terminals
Wire Sizes (Process Connector) Solid 0.2 - 4 mm²; Stranded 0.2 - 2.5 mm², 24 - 12 AWG
Wire Sizes (Power Supply Connector) 0.25 - 2.5 mm², 24 - 14 AWG
Recommended Torque 0.5 - 0.6 Nm
Dielectric Test Voltage 500 V a.c.
Operating Temperature 0 to +55 °C

Description

How do you keep an S800 I/O cabinet running when a termination unit fails and the OEM lead time stretches out? The ABB TU890 Module Termination Unit (3BSC690075R1) is the passive interface that carries field wiring, process power and ModuleBus signals into the I/O modules — and Autronexa supplies it as genuine surplus, verified before it ships.

What the TU890 Does in an S800 I/O Cabinet

This compact MTU sits between the field wiring and the I/O module. It handles the field signal and process voltage connections, distributes the ModuleBus onward to the next MTU, and generates the correct address for its I/O module by shifting the outgoing position signals down the rail. The unit is single (non-redundant) I/O, mounts horizontally on DIN rail, and uses a latching device to lock onto the rail. Mechanical keying prevents the wrong module from being inserted, which matters when several module types share one cabinet. The MTU is built for intrinsic safety applications and is specified for use with the AI890, AI893, AI895, AO890, AO895, DI890 and DO890 I/O modules.

Figure 1: Front view of the ABB TU890 Module Termination UNIT showing its physical design and enclosure.

Technical Specs That Drive the Wiring Plan

Eight channels run through 27 blue process terminals, with a maximum rated current of 2 A per I/O channel and 24 V working voltage. Wire sizing is the detail most often checked before installation: the process connector accepts solid conductors from 0.2 to 4 mm² and stranded conductors from 0.2 to 2.5 mm² (24 to 12 AWG), while the power supply connector takes 0.25 to 2.5 mm² (24 to 14 AWG). Recommended torque on both connectors is 0.5 to 0.6 Nm. The dielectric test voltage is 500 V a.c. The housing is 64 mm wide including the connector, 58 mm deep (106 mm with terminals) and 194 mm high including the latch, at 0.17 kg. Operating temperature is 0 to +55 °C at 5 to 95 % RH non-condensing, IP20, with a 40 °C limit for vertical mounting.

Figure 2: Technical layout and connection details for the ABB TU890 Module Termination UNIT.

Why Genuine Surplus Fits This Part

Termination units are passive hardware, so a verified surplus or refurbished unit carries little of the risk buyers associate with active electronics. Every unit we list is checked against OEM datasheet markings and functionally verified by our sourcing team, which is the practical alternative to waiting on factory allocation for a cabinet that is already down. The part is also certified for demanding environments — CE marked, EN 61010-1 and EN 61010-2-201 electrical safety, ATEX/IECEx Zone 2 with interface to Zone 0, marine certification from ABS, BV, DNV-GL and LR — so a replacement should match those markings exactly, and we confirm them before dispatch. Please verify current lifecycle status and availability with Autronexa before ordering.

Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB TU890, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference, including the 3BSC690075R1 article number, before it is listed.

What condition will the TU890 arrive in?

Our default is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask us to confirm the condition of the specific unit on hand.

How fast can you ship the TU890?

Contact Autronexa for current lead time and stock status — surplus and refurbished units are ready to ship once condition is confirmed.

Which I/O modules does this MTU work with?

The datasheet specifies use with the AI890, AI893, AI895, AO890, AO895, DI890 and DO890 modules, including intrinsic safety applications.

Is the TU890 still supported by ABB?

Contact Autronexa to verify OEM support status and lifecycle position for this article number before you plan a replacement.

Related & compatible parts

ABB

CI540

Genuine surplus ABB CI540 S100 I/O Bus Extension module — verified condition, tested against OEM datasheet specs, ready…

In Stock

ABB

DO840

Genuine surplus ABB DO840 digital output module, 16 channels, 24 V d.c., 0.5 A — verified condition with…

In Stock

ABB

TB820V2

Genuine surplus ABB TB820V2 Cluster Modem — fiber optic ModuleBus interface, verified condition, faster lead time than OEM.

In Stock

ABB · ABB Robots

3HAC031683-004

ABB 3HAC031683-004 Cables & Connectors. Product net weight is 3.02 kg. Gross weight is 3.44 kg. Supplied for…

Available on request

News & guides for ABB

View all articles

Request a quote for this part

Part number: TU890

We reply within one business day.

TU890 Quote reply within 1 business day