ABB I/O & Function Modules

ABB SS832

Connected to the Voting Unit

Manufacturer: ABB Part Number: SS832

Genuine surplus ABB SS832 Voting Unit for redundant power supplies — verified, tested, and ready to ship from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article number 3BSC610068R1
Type Voter
Rated output current 10 A (20 A in parallel operation)
Mains/input voltage, nominal 2x24 V d.c.
Maximum output current 25 A (Overload)
Maximum ambient temperature 55 °C
Protection rating IP20 according to IEC 60529
Dimensions (W x D x H) 32 mm x 117 mm x 125 mm
Weight 350 g (0.77 lbs.)

Description

The ABB SS832 Voting Unit is a DIN-rail module that separates two redundant power supply units, supervises their output voltage, and generates supervision signals for the power consumer. Maintenance and procurement teams specify this voter when they need a verified genuine unit without waiting on OEM lead times. Autronexa supplies tested surplus and refurbished units with clear condition notes.

What the SS832 Does in a Redundant Supply

The voter sits between two power supply outputs and the load. It isolates each supply, monitors the delivered voltage, and closes a voltage-free contact to the corresponding OK connector when output is correct. Green LEDs on the front panel give a visual indication that the correct output voltage is being delivered. Trip levels are factory preset, so there is nothing to calibrate on site. The module accepts a nominal 2×24 V d.c. input and delivers a rated output current of 10 A, or 20 A in parallel operation. Maximum output current is 25 A under overload, and the secondary short-circuit limit is 25 A RMS. Heat dissipation is 18 W, and the maximum ambient temperature is 55 °C. The output is protected against over current (current limit) and over voltage (OVP).

Figure 1: Front view of the ABB SS832 Connected to the Voting Unit showing its physical design and enclosure.

Surplus Advantage for This Voter

Redundant supply architectures often stay in service long after the original spares budget has moved on, so a failed voter can stall a live control panel. Autronexa keeps genuine surplus and refurbished ABB units in this family because buyers need a practical replacement path. Each unit is tested against OEM datasheet specifications and functionally verified by our sourcing team before it is listed. You get a verified part with a known condition, not an unknown pull. For this model, confirm the exact article number 3BSC610068R1 and the 2×24 V d.c. input configuration before ordering. Contact Autronexa with your part number for verified condition and current availability.

Figure 2: Technical layout and connection details for the ABB SS832 Connected to the Voting Unit.

Buyer’s Checklist Before You Order

Start with the article number and input configuration: This unit is built for a nominal 2×24 V d.c. supply and a 10 A rated output, so match it to your existing power supply pair. Check the mounting envelope: 32 mm width, 117 mm depth, and 125 mm height, with 15 mm horizontal and 25 mm vertical mounting spacing. Confirm the environmental fit: IP20 protection, pollution degree 2, and corrosive atmosphere class ISA-S71.04 G2. The unit carries CE marking, RoHS compliance under DIRECTIVE/2011/65/EU, and marine certification from ABS, BV, DNV-GL, and LR. Decide whether you need a surplus unit or a refurbished unit, and ask for the condition note in writing. Please verify current lifecycle status and availability with Autronexa before ordering.

Frequently asked questions

Is this a genuine ABB SS832 Voting Unit, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before listing. The SS832 carries article number 3BSC610068R1, and we confirm that marking on the unit you receive.

What condition will the SS832 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available, and we state the condition in writing before shipment.

How fast can you ship the SS832?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability; we confirm the ship date before you commit.

Does the SS832 work with a 2x24 V d.c. redundant supply?

Yes. The module is designed for a nominal 2x24 V d.c. input from two power supply units, with a rated output current of 10 A (20 A in parallel operation). Confirm your supply pair matches this configuration.

Is the SS832 still supported by ABB?

Lifecycle status is not stated in our current data. Contact Autronexa to verify OEM support status and availability before ordering.

Related & compatible parts

ABB

DP820

Genuine surplus ABB DP820 two-channel pulse counting module for incremental transmitters up to 1.5 MHz — verified condition,…

In Stock

ABB

AO820

Genuine surplus ABB AO820 analog output module — 4 isolated channels, verified condition, faster lead times than OEM.

In Stock

ABB

CI532V03

Genuine surplus ABB CI532V03 communication module with dual Siemens 3964(R) channels — verified condition, ready to ship.

In Stock

ABB

PTB810K01

Genuine surplus ABB PTB810K01 power injection terminal block for Select I/O TUS810 MTUs — verified condition, clear lead…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: SS832

We reply within one business day.

SS832 Quote reply within 1 business day