ABB Communication Modules

ABB DP820

Two-channel pulse counting module

Manufacturer: ABB Part Number: DP820

Genuine surplus ABB DP820 two-channel pulse counting module for incremental transmitters up to 1.5 MHz — verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article Number 3BSE013228R1
Signal Specification 24 V d.c. (12 - 32 V d.c.)
Number of Channels 2
Frequency Measurement Range 0.25 Hz - 1.5 MHz
Input Impedance 2.5 kΩ (DI-input)
Power Dissipation 2.5 W
Current Consumption +5 V Modulebus 120 mA
Operating Temperature 0 to +55 °C (+32 to +131 °F)
Protection Class IP20 according to IEC 60529
Dimensions (W x D x H) 45 x 102 x 119 mm (1.77 x 4.01 x 4.7 in)

Description

When a rolling mill’s length counter drifts or a turbine speed signal drops out, every hour of unplanned downtime adds cost. Sourcing a genuine ABB DP820 two-channel pulse counting module quickly is what keeps the line moving. Autronexa supplies verified surplus and refurbished units of this S800 pulse counter, tested against OEM datasheet specifications and ready for practical maintenance teams who need a working spare without OEM lead-time delays.

What the DP820 Does in an S800 System

This unit is a two-channel pulse counting module built for incremental pulse transmitters running up to 1.5 MHz. Each channel carries counters and registers for position/length and speed/frequency measurement. Three balanced inputs per channel accept a pulse transmitter, alongside one digital input and one digital output. The module supports transmitters with RS422, +5 V, +12 V, +24 V and 13 mA interfaces, so it fits a range of encoder and transducer signal levels without external conditioning. Pulse count is accumulated in a bidirectional 29-bit counter; frequency measurement spans 0.25 Hz to 1.5 MHz. The module sits in the S800 mechanics family and pairs with Module Termination Units TU810V1, TU812V1, TU814V1, TU830V1 or TU833 — confirm your MTU before ordering.

Figure 1: Front view of the ABB DP820 Two-channel pulse counting module showing its physical design and enclosure.

Technical Specs That Matter on the Floor

Three parameters drive most selection decisions. The signal specification is 24 V d.c. (12 – 32 V d.c.), giving headroom for supply variation in real cabinets. Corrosion protection meets ISA-S71.04: G3, which suits plant environments where airborne contaminants are a fact of life. RoHS compliance follows DIRECTIVE/2011/65/EU (EN 50581:2012), useful for procurement teams tracking regulatory documentation. Input impedance is 2.5 kΩ on the DI input, and each channel is individually isolated channel-to-channel and to circuit common. Maximum field cable length is 200 meters (218 yards). Power dissipation is 2.5 W, with 120 mA drawn from the +5 V Modulebus. Dimensions are 45 mm wide, 102 mm deep (111 mm including connector) and 119 mm high, at 0.15 kg.

Why Genuine Surplus Fits This Module

ABB S800 spares are not always available off the shelf from the OEM, and list-price replacements can strain a maintenance budget. Autronexa stocks genuine surplus and refurbished unit units — each verified against OEM datasheet markings and functionally checked by our sourcing team. Refurbished units are tested against OEM datasheet specifications, not just powered up. For a pulse counting module feeding position or speed data into a controller, that verification matters: a drifting counter or a dead channel is worse than no spare at all. If you are comparing against grey-market sellers, ask for part-number cross-reference and condition notes. Autronexa provides both. Please verify current lifecycle status and availability with Autronexa before ordering.

Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB DP820, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. We supply genuine surplus and refurbished ABB modules, not grey-market copies.

What condition will the DP820 arrive in?

Our default condition is Refurbished — tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available; contact us for current condition notes on specific stock.

How fast can you ship the DP820?

Lead time depends on current stock. Contact Autronexa for current lead time and availability — surplus and refurbished units are often ready to ship faster than OEM backorders.

Which Module Termination Units work with this module?

The DP820 pairs with TU810V1, TU812V1, TU814V1, TU830V1 or TU833. Confirm your MTU model before ordering, as keying and wiring differ between units.

Is the DP820 still supported by ABB?

Lifecycle status is not stated in our current data. Contact Autronexa to verify OEM support status and availability before committing to a replacement plan.

Related & compatible parts

ABB

TU840

Genuine surplus ABB TU840 termination unit for redundant TB840/TB840A ModuleBus systems — verified condition, practical lead times.

In Stock

ABB

CI540

Genuine surplus ABB CI540 S100 I/O Bus Extension module — verified condition, tested against OEM datasheet specs, ready…

In Stock

ABB

SS822

Genuine surplus ABB SS822 Power Voting Unit for redundant 24 V DC supplies — verified condition, tested and…

In Stock

ABB

V18347-2041150001

Genuine surplus ABB TZIDC-120 electro-pneumatic positioner with FOUNDATION Fieldbus, ATEX EEx ia IIC T6, verified and ready to…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: DP820

We reply within one business day.

DP820 Quote reply within 1 business day