ABB Cables & Connectors

ABB TU840

Termination Unit

Manufacturer: ABB Part Number: TU840

Genuine surplus ABB TU840 termination unit for redundant TB840/TB840A ModuleBus systems — verified condition, practical lead times.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article Number 3BSE020846R1
Power Input 24 V d.c (19.2–30 V)
ModuleBus Current Distribution Maximum 5 V 1.5 A; 24 V 1.5 A
Acceptable Wire Sizes Solid: 0.2–2.5 mm²; Stranded: 0.2–2.5 mm², 24–12 AWG
Recommended Torque 0.5 Nm
Operating Temperature 0 to +55 °C (approvals issued for +5 to +55 °C)
Ingress Protection IP20 according to IEC 60529
Dimensions 124 mm W × 186 mm H × 47 mm D
Weight 0.45 kg

Description

When a redundant ModuleBus segment drops one leg, the whole I/O cluster can lose its path to the controller. The ABB TU840 termination unit solves that by giving two TB840/TB840A modems a shared, passively wired base — and Autronexa supplies it as a genuine surplus unit with verified condition.

What the TU840 Does in a Redundant ModuleBus System

This unit is a module termination unit (MTU) built for redundant configuration of the Optical ModuleBus Modem TB840/TB840A. It is a passive unit: it carries connections for power supply, a double electrical ModuleBus, two TB840/TB840A modems, and a rotary switch for cluster address setting from 1 to 7. Four mechanical keys, two per position, configure the MTU for the right module types; each key has six positions, giving 36 different configurations, changeable with a screwdriver. The latching device locks and grounds the unit on DIN rail, and the housing mounts vertically or horizontally. For engineers specifying a redundant I/O architecture, this is the base that keeps both modem paths available without active switching logic.

Figure 1: Front view of the ABB TU840 Termination Unit showing its physical design and enclosure.

Technical Specs That Matter on Site

Power input is 24 V d.c (19.2–30 V), and ModuleBus current distribution is rated at maximum 5 V 1.5 A and 24 V 1.5 A. Wiring accepts solid 0.2–2.5 mm² and stranded 0.2–2.5 mm², 24–12 AWG, with a recommended torque of 0.5 Nm. The unit is rated for 50 V insulation voltage and a dielectric test voltage of 500 V a.c, with 2.0 W power dissipation. Operating temperature is 0 to +55 °C, with approvals issued for +5 to +55 °C; storage spans -40 to +70 °C. Ingress protection is IP20, and the unit carries CE marking plus electrical safety to EN 61010-1 and UL 61010-1. Dimensions are 124 mm wide, 186 mm high including latch, and 47 mm deep, at 0.45 kg.

Figure 2: Technical layout and connection details for the ABB TU840 Termination Unit.

Why Genuine Surplus Fits This Termination Unit

A passive MTU has no firmware to flash and no active components to age in software terms — what matters is that the mechanical keys, rotary switch, and terminal contacts are intact and the unit is electrically sound. That is exactly what our sourcing team checks: each refurbished unit is tested against OEM datasheet specifications and functionally verified before it ships. Because This unit serves legacy redundant ModuleBus architectures, OEM lead times can stretch; surplus and refurbished stock often moves faster. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB TU840, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference, including the article number 3BSE020846R1, before it is listed.

What condition will the TU840 arrive in?

Our default condition is Refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa if you need a specific condition grade.

How fast can you ship the TU840?

Lead time depends on current stock. Contact Autronexa for current lead time and availability on this termination unit.

Does the TU840 work with both TB840 and TB840A modems?

Yes. The data lists it for redundant configuration of the Optical ModuleBus Modem TB840/TB840A, with two modem positions and a double electrical ModuleBus connection.

Is the TU840 still supported by ABB?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability before ordering.

Related & compatible parts

ABB

CI532V02

Genuine ABB CI532V02 MODBUS interface submodule for Advant controllers — verified surplus stock with two RCOM/RCOM+ channels.

In Stock

ABB

CI865

Genuine surplus ABB CI865 module for AC 800M — bridges Satt I/O with hot-swap support. Verified condition, ready…

In Stock

ABB

TB826

Genuine surplus ABB TB826 optical media converter — extends ModuleBus to 5000 m per cluster. Verified condition, practical…

In Stock

ABB

INNPM22

Genuine surplus ABB INNPM22 network processor for Symphony Infi 90 — verified condition and faster lead time than…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: TU840

We reply within one business day.

TU840 Quote reply within 1 business day