ABB Communication Modules

ABB CI865

Module is the AC 800M system’s communication interface

Manufacturer: ABB Part Number: CI865

Genuine surplus ABB CI865 module for AC 800M — bridges Satt I/O with hot-swap support. Verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article Number 3BSE040795R1
Communication Protocol ABB's Satt I/O
Master or Slave Master
Hot Swap Yes
Max Units on CEX Bus 4
Connector BNC
24 V Consumption (typ.) 120 mA
Operating Temperature 0 to +55 °C (+32 to +131 °F)
Protection Class IP20 according to EN60529, IEC 529
Dimensions (W×H×D) 59 mm × 185 mm × 127.5 mm

Description

When a legacy Satt I/O segment needs to stay online on an AC 800M controller, the ABB CI865 communication interface module is the bridge that keeps that link alive. Maintenance teams running mixed-generation ABB systems rely on this module to connect older rack-based I/O without replacing the entire controller platform — and genuine surplus stock is often the only practical path to a fast replacement.

What the CI865 Does in an AC 800M System

This unit is not a general-purpose ControlNet interface. Its job is specific: it lets the AC 800M controller communicate with Satt ControlNet and, through that, with older Satt I/O systems — both 19-inch rack I/O and Series 200 I/O. That makes it a targeted migration and sustainment part rather than a universal communication card.

Functionally, the module acts as a master on the Satt I/O bus and handles I/O scanning for up to 31 distributed I/O systems. It supports hot swap, so a failed unit can be replaced online without pre-configuration — a practical detail when every minute of downtime counts. The module uses a BNC connector and draws a typical 120 mA at 24 V. Up to four units can sit on the CEX bus. Note that it cannot be used in a High Integrity controller, so confirm your controller type before ordering.

Figure 1: Front view of the ABB CI865 Module is the AC 800M system’s communication interface showing its physical design and enclosure.

Technical Specifications at a Glance

This unit carries an IP20 protection class per EN60529 and IEC 529, with corrosion protection rated G3 compliant to ISA 71.04 — relevant for control rooms and cabinets where airborne contaminants are a concern. Operating temperature range is 0 to +55 °C, and storage tolerance spans -40 to +70 °C. The module measures 59 mm wide, 185 mm high, and 127.5 mm deep, weighing 700 g including its base. It is CE-marked and compliant with EU, UAE, and CN RoHS directives as well as WEEE. These are the figures to check against your panel space and environmental envelope before committing a replacement.

Figure 2: Technical layout and connection details for the ABB CI865 Module is the AC 800M system’s communication interface.

Sourcing Genuine unit Modules Without the OEM Wait

Because This unit serves a specific legacy role, new-from-OEM availability can be slow or uncertain. Autronexa stocks genuine surplus and refurbished units that are tested against OEM datasheet specifications and functionally verified by our sourcing team. For a module like this — where a wrong or cloned card can stall a whole I/O segment — verified condition matters more than a glossy box. Refurbished units arrive functionally checked, and surplus stock often ships faster than factory lead times. If you are maintaining an AC 800M system with Satt I/O still in service, contact Autronexa with your part number for verified condition and current availability. Please verify current lifecycle status and availability with Autronexa before ordering.

Frequently asked questions

Is this a genuine ABB CI865, or a clone?

Autronexa verifies every CI865 against OEM datasheet markings and part-number cross-reference. We supply genuine surplus and refurbished units, not grey-market copies.

What condition will the CI865 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available — confirm the condition you need when you request a quote.

Can the CI865 be used in a High Integrity controller?

No. The CI865 cannot be used in a High Integrity controller. Confirm your controller type before ordering, and contact Autronexa if you need help matching the right module to your AC 800M configuration.

Does the CI865 support hot swap?

Yes. The module supports online replacement (hot swap) and does not require configuration before installation, which helps reduce downtime during maintenance.

How fast can Autronexa ship a CI865?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability — surplus and refurbished units are often ready to ship faster than OEM lead times.

Related & compatible parts

ABB

CI856

Genuine surplus ABB CI856 S100 I/O interface for AC 800M — verified, tested, and ready to ship with…

In Stock

ABB

DI831

Genuine surplus ABB DI831 16-channel 48 V d.c. digital input module for S800 I/O — verified condition, practical…

In Stock

ABB

CI540

Genuine surplus ABB CI540 S100 I/O Bus Extension module — verified condition, tested against OEM datasheet specs, ready…

In Stock

ABB

DI825

Genuine surplus ABB DI825, 8-channel 125 V d.c. digital input for S800 I/O, individually isolated, verified and ready…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: CI865

We reply within one business day.

CI865 Quote reply within 1 business day