ABB Cables & Connectors

ABB DO801

Process and power connection via detachable connectors

Manufacturer: ABB Part Number: DO801

Genuine surplus ABB DO801 16-channel 24 V digital output module for S800 I/O — verified condition, tested, and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Signal specification 24 V d.c. (12 - 32 V d.c.), 0.5 A
Number of channels 16
Signal type Current sourcing, current limiting
Isolation Groupwise isolated from ground
Supported wire size (solid) 0.05-2.5 mm², 30-12 AWG
Supported wire size (stranded) 0.05-1.5 mm², 30-12 AWG
Recommended torque 0.5-0.6 Nm
Stripping length 6-7.5mm, 0.24-0.30 inch
Corrosion protection ISA-S71.04: G3
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012)

Description

When a 16-channel digital output module fails on a running S800 I/O system, every hour of downtime adds cost. The ABB DO801 is the genuine 24 V d.c. current-sourcing output module that keeps those channels switching, and sourcing a verified surplus or refurbished unit is often faster than waiting on OEM lead times.

What the DO801 Does in an S800 I/O System

This unit is a 16-channel digital output module for ABB’s S800 I/O family, built in the S800L mechanics. It handles process and power connection via detachable connectors, so field wiring stays in place when a module is swapped. Each channel is a high-side driver with short-circuit and over-temperature protection, EMC protection components, inductive load suppression, an output state LED, and an optical isolation barrier. The outputs sit in one isolated group, groupwise isolated from ground. The module supports 24 V d.c. current-sourcing outputs across a 12–32 V d.c. signal range at 0.5 A per channel, with current limiting and short-circuit protection to ground and 30 V. OSP sets outputs to a predetermined state on communication error, and front LEDs show module and channel status.

Figure 1: Front view of the ABB DO801 Process and power connection via detachable connectors showing its physical design and enclosure.

Technical Specs That Matter on the Panel

Three values drive most installation decisions. First, the signal specification: 24 V d.c. (12 – 32 V d.c.), 0.5 A — enough headroom for standard 24 V field devices while staying within the module’s current-limiting behaviour. Second, wire size: solid 0.05-2.5 mm², 30-12 AWG, and stranded 0.05-1.5 mm², 30-12 AWG, with a recommended torque of 0.5-0.6 Nm and a stripping length of 6-7.5mm, 0.24-0.30 inch. Third, corrosion protection to ISA-S71.04: G3, which matters in plants with sulphur-bearing atmospheres. The module carries CE marking, RoHS compliance under DIRECTIVE/2011/65/EU (EN 50581:2012), and a 50 V rated insulation voltage with a 500 V a.c. dielectric test voltage.

How It Compares With Alternatives

  • New from OEM distributor: full list price and standard factory lead time; no surplus availability.
  • Grey-market clone: lower cost but no traceable ABB markings or verification.
  • Genuine surplus or refurbished (Autronexa): verified against OEM datasheet markings, functionally tested, and typically available sooner than factory build slots.

Why Genuine Surplus Fits This Module

This unit is a mature S800 I/O part, and many plants still run it in continuous process loops where a spare on the shelf is the difference between a short stop and a long one. Autronexa stocks genuine surplus and refurbished units, each tested against OEM datasheet specifications and functionally verified by our sourcing team. That means you get the ABB article number 3BSE020510R1 configuration, not a lookalike. For maintenance teams comparing against OEM list price, the surplus route also trims cost without trading away authenticity. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB DO801, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference, including the article number 3BSE020510R1, before it enters stock.

What condition will the DO801 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available when stock allows.

How fast can you ship the DO801?

Contact Autronexa for current lead time and availability; surplus and refurbished stock is ready to ship once condition is confirmed.

Does the DO801 work with my existing S800 I/O setup?

The module uses S800L mechanics and detachable connectors for process and power connection. Confirm your rack and wiring match the S800L form factor before ordering.

Is the DO801 still supported by ABB?

Contact Autronexa to verify OEM support status and lifecycle information for this article number.

Related & compatible parts

ABB

TU812V1

Genuine surplus ABB TU812V1 ModuleBus termination unit for S800 I/O — verified, tested, and ready to ship from…

In Stock

ABB

TK812V150

Genuine surplus ABB TK812V150 POF cable, 15 m simplex, for Optical ModuleBus. Verified condition and fast sourcing from…

In Stock

ABB

07 KT 94

Genuine surplus ABB 07 KT 94 Advant Controller with 24 DI, 16 DO, 8 AI/O, 4 AO —…

In Stock

ABB

SD834

Genuine surplus ABB SD834 power supply, 24 V d.c. 20 A, 480 W, DIN-rail. Verified condition and clear…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: DO801

We reply within one business day.

DO801 Quote reply within 1 business day