ABB Cables & Connectors

ABB TB842

ModuleBus Optical Port is a communication interface between the CI801 or

Manufacturer: ABB Part Number: TB842

Genuine surplus ABB TB842 ModuleBus optical port — verified, tested, and ready to ship for CI801/CI840 I/O clusters.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article Number 3BSE022464R1
Communication Protocol Modulebus
Connector Type Agilent Versatile Link
Data Rate Max. 10 Mbit/s
Wavelength 650 nm
Power Consumption 24 V, typ. 20 mA
Operating Temperature 0 to +55 °C
Ingress Protection IP20
Dimensions (W×H×D) 17.6 × 56.7 × 42.3 mm
Weight 90 g

Description

When a ModuleBus link drops out, the whole I/O cluster goes dark and maintenance teams need a verified replacement fast. The ABB TB842 ModuleBus optical port (3BSE022464R1) is the fiber-optic interface that keeps CI801 or CI840/CI840A controllers talking to TB820/TB820V2/TB840/TB840A modems. Autronexa supplies genuine surplus and refurbished units, each functionally verified before dispatch.

What This Optical Port Does in Your System

The TB842 sits between the communication interface module and the optical ModuleBus. It provides one fiber-optic port with a transmit and receive connection rated for up to 10 Mbit/s at 650 nm wavelength. The module uses Agilent (formerly Hewlett-Packard) Versatile Link connectors, so it accepts both plastic and HCS (Hard Clad Silica) fiber. In a simplex configuration, nodes connect in a ring; in a duplex setup, they connect in a row. The unit supports line and module redundancy plus hot swap, which matters when you need to replace a port without shutting down the cluster. It draws typically 20 mA at 24 V and dissipates 0.5 W. Mounting is vertical or horizontal, and the IP20 housing measures 17.6 mm wide, 56.7 mm high, and 42.3 mm deep at 90 g. Operating temperature is 0 to +55 °C, with approvals issued for +5 to +55 °C; for vertical mounting, the maximum ambient is 40 °C.

Figure 1: Front view of the ABB TB842 ModuleBus Optical Port is a communication interface between the CI801 or showing its physical design and enclosure.

Why Genuine Surplus Makes Sense for This Module

ABB ModuleBus optical ports are often replaced as complete units rather than repaired in the field, so verified surplus stock gives maintenance teams a practical alternative to waiting on OEM lead times. Every unit we offer is tested against the OEM datasheet specifications and functionally verified by our sourcing team. You get the same connector type and optical performance without paying a brand-new list price. Because the module supports hot swap and redundancy, a spare on the shelf can cut the window between fault detection and restoration. Autronexa specialises in genuine surplus and refurbished automation components across ABB, Allen-Bradley, Siemens, Schneider and other major platforms. If you are maintaining an older I/O cluster, contact us with your part number for verified condition and current availability.

Figure 2: Technical layout and connection details for the ABB TB842 ModuleBus Optical Port is a communication interface between the CI801 or.

Sourcing and Compatibility Checks Before You Order

Before committing to a replacement, confirm the exact article number 3BSE022464R1 and check how the port connects in your configuration. For a single I/O setup, This unit links to CI801 via TB806, or to CI840/CI840A via TU847 and TB806. For redundant I/O, it connects via TU846 and TB846. Make sure every node on the ModuleBus uses the same transmitter/receiver type, because mixed optical types will not communicate reliably. Also verify the mounting orientation against your ambient temperature: vertical mounting reduces the maximum ambient to 40 °C. The unit carries CE marking, EN 61010 and UL 61010 electrical safety approvals, and is rated for ATEX Zone 2 and cULus Hazardous Location Class 1 Zone 2. Marine certificates include ABS, BV, DNV-GL and LR. Autronexa can help you cross-check revision details and accessory compatibility so the part you receive matches your system. Please verify current lifecycle status and availability with Autronexa before ordering.

Frequently asked questions

Is this a genuine ABB TB842, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. We supply genuine surplus and refurbished ABB modules, not grey-market copies.

What condition will the TB842 arrive in?

Our default condition is refurbished: each unit is tested against OEM specifications and functionally verified by our sourcing team before dispatch.

How fast can you ship the TB842?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability.

Does the TB842 work with both CI801 and CI840/CI840A controllers?

Yes. The TB842 connects to CI801 via TB806, and to CI840/CI840A via TU847 and TB806 for single I/O, or via TU846 and TB846 for redundant I/O.

Can I use plastic and HCS fiber with this module?

The TB842 accepts both plastic and HCS (Hard Clad Silica) fiber with Agilent Versatile Link connectors. Every node on the ModuleBus must use the same transmitter/receiver type.

Related & compatible parts

ABB

INNPM22

Genuine surplus ABB INNPM22 network processor for Symphony Infi 90 — verified condition and faster lead time than…

In Stock

ABB

CI867K01

Genuine surplus ABB CI867K01 Modbus TCP interface with TP867 baseplate — verified condition, faster than OEM lead times.

In Stock

ABB

CI868K01

Genuine surplus ABB CI868K01 IEC 61850 interface module with TP867 baseplate — verified condition, ready to ship from…

In Stock

ABB

DI821

Genuine surplus ABB DI821 digital input module for S800 I/O — 8 isolated channels, 230 V a.c./220 V…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: TB842

We reply within one business day.

TB842 Quote reply within 1 business day