ABB Cables & Connectors

ABB TU841

Module termination unit

Manufacturer: ABB Part Number: TU841

Genuine surplus ABB TU841 termination unit for non-redundant I/O — verified condition, practical lead times, sourcing support from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Power input 24 V d.c (19.2 - 30 V)
Communication protocol Modulebus
Line redundancy Yes
Hot swap No
Acceptable wire sizes Solid: 0.2 - 2.5 mm²; Stranded: 0.2 -2.5 mm², 24 -12 AWG
Recommended torque 0.5 Nm
Mechanical keys 36 different combinations
Operating temperature 0 to +55 °C (+32 to +131 °F)
Ingress protection IP20 according to IEC 60529
Weight 0.45 kg (0.99 lbs.)

Description

How do you keep non-redundant I/O clusters running when the ABB TU841 module termination unit is the part standing between a TB840/TB840A modem and the process? You source a genuine unit with a known history. This ABB termination unit connects a single electrical ModuleBus, one power supply and one TB840/TB840A modem to non-redundant I/O in an S800 I/O system, and Autronexa supplies it as verified surplus or refurbished stock rather than a new-from-OEM order with an open-ended lead time.

What This Termination Unit Does in an S800 I/O Cluster

The TU841 is a passive MTU. It carries connections for the 24 V d.c power supply (19.2 – 30 V), a single electrical ModuleBus and two TB840/TB840A positions, and it adds a rotary switch for cluster address setting from 1 to 7. Four mechanical keys, two per position with six positions each, give 36 different configurations, so the unit can be keyed to accept only the right module types and block wrong insertion. A latching device locks and grounds the unit on DIN rail, and mounting can be vertical or horizontal. Termination Unit TU840 serves redundant I/O; this variant serves non-redundant I/O, so confirm which arrangement your cluster uses before ordering.

Figure 1: Front view of the ABB TU841 Module termination unit showing its physical design and enclosure.

Surplus Advantage for This ABB MTU

Because the unit is passive, condition is mostly about terminal integrity, keying and the latch rather than firmware. Autronexa’s refurbished stock is tested against OEM datasheet specifications and functionally verified by our sourcing team, which matters when you are replacing a unit in a live cabinet and cannot wait on a factory allocation. Surplus and refurbished, ready to ship — the practical alternative when an OEM quote stretches past your maintenance window. Please verify current lifecycle status and availability with Autronexa before ordering.

Sourcing Checklist Before You Buy

Match the article number 3BSE020848R11 and confirm the non-redundant I/O role. Check wire sizes: solid 0.2 – 2.5 mm² and stranded 0.2 -2.5 mm², 24 -12 AWG, with recommended torque 0.5 Nm. Confirm the cluster address range you need (1 to 7) and that the mechanical key configuration suits your module types. Ask whether the unit is surplus or refurbished and request the verification record. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB TU841, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference, including the article number 3BSE020848R11, before it enters stock.

What condition will the TU841 arrive in?

Our default condition is Refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask us to confirm the grading on the specific unit offered.

How fast can you ship the TU841?

Lead time depends on current stock. Contact Autronexa for the current lead time and availability on this termination unit.

Does the TU841 work with redundant I/O?

No. This unit connects TB840/TB840A to non-redundant I/O; the TU840 is the variant for redundant I/O. Confirm your cluster arrangement before ordering.

Is the TU841 still supported by ABB?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability before you commit.

Related & compatible parts

ABB

DI801

Genuine surplus ABB DI801 digital input module — 16 channels, 24 V d.c., S800 I/O. Verified condition, tested,…

In Stock

ABB

DO910-S

Genuine surplus ABB DO910-S: 4-channel intrinsically safe digital output for S900 I/O, ATEX Zone 1, verified and ready…

In Stock

ABB

PTB810K01

Genuine surplus ABB PTB810K01 power injection terminal block for Select I/O TUS810 MTUs — verified condition, clear lead…

In Stock

ABB

AI930S

Genuine surplus ABB AI930S HART analog input, 4-channel 4...20 mA with ATEX Zone 1 rating — verified condition…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: TU841

We reply within one business day.

TU841 Quote reply within 1 business day