ABB I/O & Function Modules

ABB AI930S

ABB HART Analog Input

Manufacturer: ABB Part Number: AI930S

Genuine surplus ABB AI930S HART analog input, 4-channel 4...20 mA with ATEX Zone 1 rating — verified condition and sourcing support from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article number 3KDE175511L9300
Number of channels 4
Signal type 4...20 mA
HART Yes
Intrinsic safety Yes
Hazardous location ATEX Zone 1
Max ambient temperature -20 °C...60 °C
Dimensions (W x D x H) 20 mm x 104 mm x 104 mm
Weight 0.14 kg

Description

When a remote I/O station in a Zone 1 hazardous area loses an analog input card, every hour of downtime carries real cost. The ABB AI930S HART Analog Input is the four-channel 4…20 mA module that keeps loop-powered transmitters reporting, and sourcing a genuine surplus or refurbished unit through Autronexa gives you a verified alternative to waiting on OEM lead times.

What This Module Does in an S900 I/O Station

The AI930S is an analog input card for the ABB S900 remote I/O system, the platform that communicates with the control level over PROFIBUS DP and can be installed directly in the field. That field-mount design cuts marshalling and wiring costs, and it is why the S900 family is common in process plants where cabinets are expensive or impractical. This card carries four input channels for 4…20 mA loop-powered two-wire transmitters, supplies power to those transmitters, and transmits HART frames over the fieldbus with cyclic HART variables. Short-circuit and break detection are built in, and electrical isolation separates input from bus and from power. A common return serves all four inputs. The module is the intrinsically safe variant (AI4H-Ex), rated for ATEX Zone 1 installation and for connecting intrinsically safe field devices installed in Zone 2, Zone 1 or Zone 0.

Figure 1: Front view of the ABB AI930S ABB HART Analog Input showing its physical design and enclosure.

Technical Specs That Matter in Service

Four channels at 4…20 mA with HART support is the headline configuration, and it suits loop-powered transmitters that need both a process signal and HART diagnostics on the same pair of wires. The ATEX Zone 1 rating is the specification that decides where this card can be mounted — it belongs in hazardous-area installations, not general-purpose cabinets. Environmental ratings also shape service life: the card is rated for a maximum ambient temperature of -20 °C to 60 °C and for relative humidity up to 93 % ± 3 % at 40 °C, and it carries G3 coating for corrosive atmospheres per ISA-S71.04. The compact 20 mm wide, 104 mm deep, 104 mm high housing weighs 0.14 kg, so it fits dense S900 racks without adding meaningful load. RoHS compliance is stated under DIRECTIVE/2011/65/EU (EN 50581:2012).

Figure 2: Technical layout and connection details for the ABB AI930S ABB HART Analog Input.

Why Buy Genuine Surplus for This Card

Hazardous-area I/O is not a place for unverified parts. Autronexa supplies genuine surplus and refurbished S900 modules, and refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team before they ship. The practical advantage is availability: when an OEM lead time stretches, a verified surplus card can restore the loop sooner, and the cost position is typically better than new list price. The S900 design supports hot-swap replacement during operation, so a like-for-like card can be exchanged without interrupting primary voltage — but confirm your station variant and safety procedures before any swap. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB AI930S, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference, including the article number 3KDE175511L9300, before it is listed as genuine surplus or refurbished stock.

What condition will the AI930S arrive in?

Units are supplied in refurbished condition by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa if you need a specific condition or grading confirmed before ordering.

How fast can Autronexa ship this module?

Lead time depends on current stock. Contact Autronexa with the part number for verified condition and current availability, and we will confirm the shipping date before you commit.

Can the AI930S be used in a Zone 1 hazardous area?

Yes. The module is the intrinsically safe AI4H-Ex variant, rated for ATEX Zone 1 installation and for connecting intrinsically safe field devices installed in Zone 2, Zone 1 or Zone 0. Confirm your system variant and local requirements before installation.

Does this card support HART transmitters?

Yes. The AI930S provides input and power supply for 4...20 mA loop-powered two-wire transmitters and transmits HART frames via the fieldbus, with cyclic HART variables available to the control system.

Related & compatible parts

ABB

AO815

Genuine surplus ABB AO815 analog output module — 8 isolated 4-20mA channels with HART pass-through, verified and ready…

In Stock

ABB

AI950B

Genuine surplus ABB AI950B analog input module for S900 I/O — 4 isolated channels, ATEX Zone 2, PROFIBUS…

In Stock

ABB

DOS810

Genuine surplus ABB DOS810 digital output module for Select I/O — verified condition, faster lead time than OEM,…

In Stock

ABB

07AI91

Genuine surplus ABB 07AI91 analog input module: 8 configurable channels for temperature or voltage on the CS31 system…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: AI930S

We reply within one business day.

AI930S Quote reply within 1 business day