ABB I/O & Function Modules

ABB AO815

Analog Output Module

Manufacturer: ABB Part Number: AO815

Genuine surplus ABB AO815 analog output module — 8 isolated 4-20mA channels with HART pass-through, verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article Number 3BSE052605R1
Signal Specification 4..20 mA
Number of Channels 8
Resolution 12 bit
Isolation Groupwise isolated from ground
Output Load Max 750 Ω
Error Max 0.1%
Update Cycle Time 10 ms
Operating Temperature 0 to +55 °C
Protection Class IP20 according to IEC 60529

Description

When a process loop loses its analog output, the whole control strategy stalls. The ABB AO815 analog output module restores eight isolated 4–20 mA channels to an S800 station, and Autronexa supplies it as a genuine surplus or refurbished unit with verified condition and clear lead times.

What the AO815 Delivers in an S800 Station

This unit is an 8-channel analog output module for ABB’s S800 I/O family. Each channel drives a 4–20 mA signal into field loads up to 750 Ω, with 12-bit resolution and a maximum error of 0.1%. The eight channels form one group isolated from ground, so a fault on one loop does not drag the others down. Outputs are short-circuit proof and current-limited, which protects the module when field wiring is disturbed during maintenance. The update cycle time is 10 ms, and the input filter rise time is 23 ms (0–90%), giving stable control on slow process loops. HART pass-through is supported on a point-to-point basis only, and the output filter must be enabled on any channel used for HART communication. The module performs cyclic self-diagnostics and reports external channel errors, internal channel errors, and module errors through front LEDs marked F, R, W, and O.

Figure 1: Front view of the ABB AO815 Analog Output Module showing its physical design and enclosure.

Why Genuine Surplus Beats Waiting on a Factory Order

A failed output module is rarely a planned event. When an S800 station drops channels, maintenance teams need a verified replacement in hand, not a factory lead-time quote. Autronexa stocks surplus and refurbished ABB S800 modules, and each unit is tested against OEM datasheet specifications and functionally verified by our sourcing team before it ships. That means you get the genuine article — correct keying code DB, S800 mechanics, and compatibility with TU810, TU812, TU814, TU830, and TU833 MTUs — without paying a brand-new list price or accepting an unverified grey-market unit. For plants running mixed S800 installations, keeping a verified spare on the shelf is the practical way to avoid a single-channel fault becoming a full-station outage.

Sourcing the Right Variant Without Guesswork

Before you order, confirm the exact article number and revision on your existing module. This unit carries article number 3BSE052605R1 and keying code DB, and it must sit in a matching MTU — TU810V1 is the direct match, while TU812, TU814, TU830, and TU833 also accept this module. Check the environmental envelope for your cabinet: operating temperature is 0 to +55 °C, with approvals issued for +5 to +55 °C, and the module is rated IP20 with G3 corrosion protection per ISA-S71.04. If your installation uses HART, verify that the output filter is enabled on the channels in question. Please verify current lifecycle status and availability with Autronexa before ordering, and send your part number for a condition report and current lead time.

Frequently asked questions

Is this a genuine ABB AO815, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. The AO815 we supply is genuine ABB surplus or refurbished stock, not a copy.

What condition will the AO815 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa if you need a specific condition grade.

How fast can you ship the AO815?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability.

Which MTUs work with the AO815?

The module is compatible with TU810, TU812, TU814, TU830, and TU833 MTUs. TU810V1 is the direct match; confirm your existing MTU before ordering.

Does the AO815 support HART communication?

Yes, HART pass-through is supported on a point-to-point basis only. The output filter must be enabled on any channel used for HART communication.

Related & compatible parts

ABB

TU830V1

Genuine surplus ABB TU830V1 termination unit — 16 channels, DIN rail mount, tested and ready for your S800…

In Stock

ABB

AI930B

Genuine surplus ABB AI930B analog input module — 4 channels, 4...20 mA, HART, ATEX Zone 2. Verified condition,…

In Stock

ABB

DI810

Genuine surplus ABB DI810 digital input module, 16 channels, 24 V d.c., S800 mechanics — verified condition from…

In Stock

ABB

TB825

Genuine surplus ABB TB825 ModuleBus optical media converter — verified, tested, and ready to ship for S800 I/O…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: AO815

We reply within one business day.

AO815 Quote reply within 1 business day