ABB I/O & Function Modules

ABB DI810

Digital Input Module

Manufacturer: ABB Part Number: DI810

Genuine surplus ABB DI810 digital input module, 16 channels, 24 V d.c., S800 mechanics — verified condition from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Input voltage range, "0" -30..+5 V
Input voltage range, "1" 15..30 V
Input impedance 3.5 kΩ
Isolation Groupwise isolated from ground, 2 groups with 8 channels
Filter times (digital, selectable) 2, 4, 8, 16 ms
Maximum field cable length 600 meters (656 yards)
Power dissipation Typ. 1.8 W
Operating temperature 0 to +55 °C (+32 to +131 °F)
Protection class IP20 according to IEC 60529
Dimensions (W x D x H) 45 mm x 102 mm x 119 mm

Description

How do you keep a running S800 installation supplied when a digital input module fails and OEM lead times stretch? The ABB DI810 digital input module answers that question for maintenance and procurement teams: 16 current-sinking channels at 24 V d.c., split into two isolated groups of eight, each with its own process voltage supervision. Genuine surplus and refurbished units give you a verified alternative to waiting on a factory order.

What the DI810 Does in an S800 System

This module reads 24 V d.c. field signals and passes them to the controller over the ModuleBus. Each channel carries current-limiting components, EMC protection, an input state LED and an optical isolation barrier, so a fault on one field circuit stays contained. The two groups are individually isolated from ground, and each group has a voltage supervision input that raises a channel error signal through the ModuleBus if the process voltage disappears. Selectable digital filter times of 2, 4, 8 and 16 ms let you damp noisy inputs without changing wiring. Field cable runs up to 600 meters (656 yards) are supported, which suits panels where sensors sit well away from the cabinet.

Figure 1: Front view of the ABB DI810 Digital Input Module showing its physical design and enclosure.

Why Genuine Surplus Fits This Module

S800 systems stay in service for decades, and This unit is a regular request from plants maintaining existing installations. A refurbished unit from Autronexa is tested against OEM datasheet specifications and functionally verified by our sourcing team before it ships — genuine parts, verified. You avoid the long lead time of a factory order and the uncertainty of an unbranded copy, and the module drops into the same slot with the same keying code AA. For buyers comparing against OEM list price, surplus stock is a practical route to keeping spares on the shelf. Please verify current lifecycle status and availability with Autronexa before ordering.

Matching the Module to Your MTU and Panel

Before you order, confirm the mounting base unit. This unit works with MTU types TU810, TU812, TU814, TU818, TU830, TU833, TU838 and TU850, and the keying code is AA. Check the mechanical envelope: 45 mm wide, 102 mm deep (111 mm including connector) and 119 mm high, at 0.15 kg. Note the ambient limit — 55 °C (131 °F) normally, but 40 °C (104 °F) for vertical mounting in a compact MTU. The module is IP20 and rated for 5 to 95 % relative humidity, non-condensing. Autronexa supplies surplus and refurbished, ready to ship; contact us with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB DI810, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it enters stock. The DI810 we supply is genuine ABB, not a copy.

What condition will the DI810 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available — confirm the condition you need when you contact us.

How fast can you ship the DI810?

Lead time depends on current stock. Contact Autronexa with your part number and we will confirm verified condition and the shipping date before you order.

Which MTUs does the DI810 work with?

The module is compatible with MTU types TU810, TU812, TU814, TU818, TU830, TU833, TU838 and TU850, with keying code AA. Match the base unit to your panel before ordering.

Is the DI810 still supported by ABB?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability for this module.

Related & compatible parts

ABB

V18345-1020521001

Genuine surplus ABB TZIDC electro-pneumatic positioner with HART, IP65 aluminium case, double-acting fail-freeze output — verified and ready…

In Stock

ABB

CI865

Genuine surplus ABB CI865 module for AC 800M — bridges Satt I/O with hot-swap support. Verified condition, ready…

In Stock

ABB

CI858

Genuine surplus ABB CI858 DriveBus interface for AC 800M — verified, tested, and ready to ship with clear…

In Stock

ABB

07KT93

Genuine surplus ABB 07KT93 processor set with a 10 kHz high-speed counter — verified condition, practical sourcing support…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: DI810

We reply within one business day.

DI810 Quote reply within 1 business day