ABB Cables & Connectors

ABB TU846

Module Termination Unit

Manufacturer: ABB Part Number: TU846

Genuine surplus ABB TU846 termination unit for redundant CI840/CI840A and I/O — verified condition, practical lead times.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article Number 3BSE022460R1
Communication Protocol PROFIBUS DP-V1
Power Input 24 V d.c. (19.2 - 30 V)
Connectors PROFIBUS: DSUB9; Service ports: RJ45
ModuleBus Current Distribution Max 5 V 1.5 A; max 24 V 1.5 A
Acceptable Wire Sizes 0.25 - 2.5mm², 24 - 14 AWG
Operating Temperature 0 to +55 °C (+32 to +131 °F)
Ingress Protection IP20
Dimensions (W x H x D) 124 mm x 186 mm x 47 mm
Weight 0.5 kg (1.1 lbs.)

Description

The ABB TU846 module termination unit (article 3BSE022460R1) is the passive base for redundant CI840/CI840A field communication and redundant I/O in ABB S800-style systems. Maintenance and procurement teams choose genuine surplus or refurbished units when an OEM replacement lead time would stall a redundant pair. Autronexa supplies verified units with clear condition notes.

What the TU846 Does in a Redundant Pair

This module termination unit carries the physical connections a redundant CI840/CI840A pair needs: power input, two electrical ModuleBuses, two CI840/CI840A positions, and two rotary switches for station address settings from 0 to 99. A ModuleBus Optical Port TB842 connects through TB846. Four mechanical keys, two per position with six positions each, give 36 configurations so the wrong module type cannot be inserted. The unit latches to DIN rail for locking and grounding, mounts vertically or horizontally, and needs free space to its left for removal. It cannot be replaced with power applied.

Figure 1: Front view of the ABB TU846 Module Termination Unit showing its physical design and enclosure.

Specs That Drive Installation Planning

Power input is 24 V d.c. (19.2 – 30 V). PROFIBUS uses a DSUB9 connector; service ports use RJ45. ModuleBus current distribution is maximum 5 V 1.5 A and maximum 24 V 1.5 A. Acceptable wire sizes are 0.25 – 2.5mm², 24 – 14 AWG, with recommended torque 0.5 – 0.6 Nm and stripping length 6-7.5 mm, 0.24-0.30 in. Rated insulation voltage is 50 V with a dielectric test voltage of 500 V a.c. The maximum ModuleBus length from the unit to the ModuleBus terminator is 2.5 meters. Operating temperature is 0 to +55 °C (+32 to +131 °F), with approvals issued for +5 to +55 °C; vertical mounting limits ambient to 40 °C (104 °F). Ingress protection is IP20.

Figure 2: Technical layout and connection details for the ABB TU846 Module Termination Unit.

Why Genuine Surplus Fits This Part

Redundant I/O architectures depend on the termination unit being electrically sound and mechanically keyed correctly. A refurbished unit from Autronexa is tested against OEM datasheet specifications and functionally verified by our sourcing team, so keys, connectors, and rotary switches are checked before dispatch. Surplus and refurbished units are ready to ship, which shortens the gap when an OEM order would leave a redundant pair incomplete. Because this is a passive unit, condition of the connectors and latch matters more than firmware revision — our team can confirm those details against your application before you commit.

Sourcing Checklist Before You Order

Confirm the article number 3BSE022460R1 matches your bill of materials, and verify whether your configuration uses redundant CI840/CI840A or single modules, since TU847 covers the single case. Check that your panel allows space to the left for removal and that the ModuleBus run stays within 2.5 meters. Ask for the condition grade and any connector or latch notes. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB TU846, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference for article 3BSE022460R1 before it is listed. Units are genuine surplus or professionally refurbished, not grey-market copies.

What condition will the TU846 arrive in?

The site default condition is Refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask Autronexa for the specific condition grade and connector notes on the unit reserved for you.

How fast can you ship the TU846?

Surplus and refurbished units are ready to ship. Contact Autronexa for current lead time and stock status on article 3BSE022460R1 before placing your order.

Does the TU846 support redundant CI840/CI840A configurations?

Yes. The TU846 is built for redundant CI840/CI840A and redundant I/O, with two electrical ModuleBuses and two rotary switches for station addresses 0 to 99. For single I/O modules, ABB specifies TU847 instead.

Is the TU846 still supported by ABB?

Lifecycle status is not stated in our source data. Please verify current lifecycle status and availability with Autronexa before ordering.

Related & compatible parts

ABB

CI871A

Genuine surplus ABB CI871A PROFINET IO interface for AC 800M — verified condition, faster lead time than OEM,…

In Stock

ABB

DI840

Genuine surplus ABB DI840 digital input module: 16 channels, 24 V d.c., SOE, redundant-ready. Verified condition and current…

In Stock

ABB

PM858K02

Genuine surplus ABB PM858K02 CPU board kit with TP830 baseplates, TB807 terminators and backup batteries — verified condition,…

In Stock

ABB

CI867K01

Genuine surplus ABB CI867K01 Modbus TCP interface with TP867 baseplate — verified condition, faster than OEM lead times.

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: TU846

We reply within one business day.

TU846 Quote reply within 1 business day