ABB Cables & Connectors

ABB TU847

Module termination unit

Manufacturer: ABB Part Number: TU847

Genuine surplus ABB TU847 termination unit for redundant CI840/CI840A — verified condition, faster than OEM lead time.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article number 3BSE022462R1
Communication protocol PROFIBUS DP-V1
Power input 24 V d.c. (19.2 - 30 V)
Module redundancy Yes
Hot Swap No
Connector PROFIBUS DSUB9; service ports RJ45
Acceptable wire sizes 0.25 - 2.5mm², 24 - 14 AWG
Operating temperature 0 to +55 °C (+32 to +131 °F)
Ingress protection IP20 according to IEC 529
Dimensions (W x H x D) 124 mm x 186 mm x 47 mm

Description

The ABB TU847 module termination unit connects power, ModuleBus, and two CI840/CI840A interfaces in redundant field communication setups. Engineers maintaining PROFIBUS DP-V1 architectures need this exact termination base when a channel fails, and sourcing a genuine surplus or refurbished unit keeps the line running without waiting on OEM lead times.

What This Termination Unit Does in a Redundant CI840 Pair

The TU847 is a passive base that carries the wiring for two CI840/CI840A field communication interfaces. It provides connections for the 24 V d.c. power supply (19.2–30 V), the electrical ModuleBus, and two service ports on RJ45 connectors. Two rotary switches set the station address from 0 to 99, so commissioning stays local and does not depend on software tools.

Mechanical keying is a practical detail worth noting. Four keys, two per position, each with six settings, give 36 different configurations. That prevents inserting the wrong module type into the base. The unit latches to DIN rail for locking and grounding, and it mounts vertically or horizontally. Remember that TU846/unit needs clearance to the left for removal, and it cannot be replaced with power applied.

Figure 1: Front view of the ABB TU847 Module termination unit showing its physical design and enclosure.

Why Genuine Surplus Fits This ABB Base

Redundant CI840 configurations are usually part of a running process, and a failed termination base stops both channels. OEM lead times on legacy ABB modules can stretch, while a verified surplus unit is often available sooner. Autronexa stocks genuine parts, verified against OEM datasheet markings and part-number cross-reference, so This unit you receive matches the 3BSE022462R1 article number and the connector layout described here.

Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. That means the 24 V input range, the RJ45 service ports, and the mechanical key positions are checked before shipping. For a passive base like this, condition matters more than firmware version, and surplus stock often preserves the original keying configuration.

Figure 2: Technical layout and connection details for the ABB TU847 Module termination unit.

Sourcing Checks Before You Order

Confirm the exact article number and whether your installation uses the standard unit or the G3-compliant unitZ variant. Check that the CI840/CI840A modules you plan to seat match the mechanical key positions, since the 36-combination keying is set at the factory. Verify wire sizes against the 0.25–2.5 mm² range and the recommended torque of 0.5–0.6 Nm before terminating.

Autronexa can confirm condition, keying, and current availability from stock. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB TU847, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference. The TU847 carries article number 3BSE022462R1, and we confirm the connector layout and keying before shipping.

What condition will the TU847 arrive in?

Our default condition is Refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available when stock allows.

How fast can you ship the TU847?

Lead time depends on current stock. Contact Autronexa for current lead time and availability; surplus and refurbished units are often ready to ship faster than OEM backorders.

Does the TU847 work with CI840 and CI840A modules?

Yes. The TU847 is designed for redundant configuration of the CI840/CI840A field communication interface, with two PROFIBUS connections and two service tool connections on RJ45 ports.

Is the TU847 still supported by ABB?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability before ordering.

Related & compatible parts

ABB

V18345-2010420001

Genuine surplus ABB TZIDC positioner, 4–20 mA two-wire, IP 65, double acting fail safe — verified condition and…

In Stock

ABB

PM858K01

Genuine surplus ABB PM858K01 CPU board for AC 800M — verified condition, practical sourcing support, and faster availability…

In Stock

ABB

DI820

Genuine surplus ABB DI820 digital input module — 8 isolated channels, 120 V a.c./110 V d.c., verified condition…

In Stock

ABB

V18345-2010421001

Genuine surplus ABB TZIDC positioner, double-acting fail-safe, 4–20 mA, IP 65. Verified condition and sourcing support from Autronexa.

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: TU847

We reply within one business day.

TU847 Quote reply within 1 business day