Schneider Electric Cables & Connectors

Schneider Electric ABE7R16S210

Electromechanical output relay sub-base

Manufacturer: Schneider Electric Part Number: ABE7R16S210

Genuine surplus Schneider Electric ABE7R16S210 relay sub-base — 16 channels, 10 A commons, DIN-rail mount. Verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Range of product Modicon ABE7
Number of channels 16
Rated supply voltage 24 V DC for PLC end
Maximum current per output common 10 A
Current per channel 5 A for preactuator end
Contacts type and composition 1 NO for preactuator end
Maximum switching voltage 250 V AC 50/60 Hz; 30 V DC conforming to IEC 60947-5-1
Fixing mode By clips (35 mm symmetrical DIN rail); by screws (solid plate with fixing kit)
Width 206 mm
Net weight 0.405 kg

Description

When a relay sub-base fails on a running Modicon ABE7 rack, every hour of downtime compounds. The Schneider Electric ABE7R16S210 is a 16-channel electromechanical output relay sub-base that restores volt-free switching between your PLC and preactuator loads. Autronexa supplies genuine surplus and refurbished units, verified against OEM datasheet markings, so you get a practical replacement without the OEM lead-time wait.

What This Sub-Base Does in Your Panel

The ABE7R16S210 sits between the PLC output card and field devices, providing 16 independent 1 NO relay contacts. Each channel carries up to 5 A at the preactuator end, while each output common handles a maximum of 10 A. The volt-free contact arrangement means you can switch 250 V AC 50/60 Hz or 30 V DC circuits, conforming to IEC 60947-5-1, without tying the PLC supply to the load. The unit clips onto 35 mm symmetrical DIN rail or mounts by screws with a fixing kit. Removable terminal blocks simplify wire changes during service. With a 206 mm width and 0.405 kg net weight, it fits standard panel layouts.

Figure 1: Front view of the Schneider Electric ABE7R16S210 Electromechanical output relay sub-base showing its physical design and enclosure.

Reliability and Service Notes

From a maintenance standpoint, This unit is built for long service intervals. Mechanical durability is rated at 20,000,000 cycles, and electrical durability reaches 500,000 cycles at 1500 mA and 230 V AC-12. Coil energisation and NO closing take no more than 10 ms; de-energisation and NO opening complete in 5 ms or less, which helps when sequencing fast outputs. The IP2X protection and -5…60 °C operating range suit typical cabinet environments. For inspection, check terminal torque at 0.6 N.m with a flat Ø 3.5 mm screwdriver, and verify that the removable blocks are fully seated after any wiring work. Follow the manufacturer safety manual for all maintenance.

Figure 2: Technical layout and connection details for the Schneider Electric ABE7R16S210 Electromechanical output relay sub-base.

Surplus Advantage: Practical Lead Times

Genuine surplus and refurbished unit units make sense when an OEM replacement quote stretches weeks and the line needs to run. Autronexa sources these sub-bases from decommissioned panels and verified refurbishment channels. Each unit is inspected for contact wear, coil condition, and terminal integrity, then tested against OEM datasheet specifications and functionally verified by our sourcing team. You get a genuine part with clear condition notes and current availability, not a grey-market unknown. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this ABE7R16S210 a genuine Schneider Electric unit or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. We supply genuine surplus and refurbished Schneider Electric components, not clones or copies.

What condition will the ABE7R16S210 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available; contact Autronexa for current condition notes on specific stock.

How fast can you ship the ABE7R16S210?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability; we confirm lead time before order placement.

Does this sub-base work with Modicon ABE7 racks?

Yes, the ABE7R16S210 is part of the Modicon ABE7 range and mounts on 35 mm symmetrical DIN rail or by screws with a fixing kit. Confirm your rack and PLC output compatibility with Autronexa before ordering.

Related & compatible parts

Schneider Electric

140CPU42401C

Genuine surplus Schneider Electric 140CPU42401C CPU module — verified, tested, and ready to ship for Modicon Quantum systems.

In Stock

Schneider Electric

BMXXBE1000

Genuine surplus Schneider Electric BMXXBE1000 X-bus rack expansion module — verified condition, practical lead times, and sourcing support…

In Stock

Schneider Electric

140NOE25100C

Genuine surplus Schneider Electric 140NOE25100C Ethernet module — fiber-optic support, one channel, verified condition and clear lead times.

In Stock

Schneider Electric

490NAC0201

Genuine surplus 490NAC0201 fiber optic singlemode adapter for Modicon M580 HSBY CPUs — verified condition, ready to ship.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: ABE7R16S210

We reply within one business day.

ABE7R16S210 Quote reply within 1 business day