Schneider Electric Cables & Connectors

Schneider Electric ABFM32H300

Cabled connector

Manufacturer: Schneider Electric Part Number: ABFM32H300

Genuine surplus Schneider Electric ABFM32H300 cabled connector for Modicon Quantum — 32 channels, 3 m cable, verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Number of Channels 32
Cable Length 9.8 ft (3 m)
Signal Type Relay I/O
Connector Type HE10
Number of Ways 20 ways
AWG Gauge AWG 22
Wire Section 0.324 mm²
Current Rating 2 A
Voltage Rating 250 V
Operating Temperature Range –20 °C to +60 °C

Description

When a Modicon Quantum relay I/O link fails, every hour of downtime adds cost. The ABFM32H300 from Schneider Electric is a 32-channel cabled connector built to restore that link with a 9.8 ft (3 m) shielded cable and HE10 termination. Autronexa supplies this genuine part as verified surplus or refurbished stock, giving you a practical alternative to long OEM lead times.

What This Connector Does in a Quantum System

The ABFM32H300 is a connection accessory for Modicon Quantum PLCs, specifically designed to carry relay I/O signals. It splits its 32 channels into two groups of 16, each routed through a separate connector. The HE10 connector type and 20-way configuration match the Quantum front-panel layout, so the unit seats directly without adapters. A multi-conductor shielded cable protects signal integrity in electrically noisy cabinets. The cable measures 9.8 ft (3 m), which gives technicians enough slack to route through dense panels while keeping the run short enough to limit interference pickup. Each conductor is AWG 22 with a 0.324 mm² wire section, rated for 2 A at up to 250 V. The connector operates between –20 °C and +60 °C, covering typical control-room and enclosure conditions.

Figure 1: Front view of the Schneider Electric ABFM32H300 Cabled connector showing its physical design and enclosure.

Surplus Advantage: Why a Verified Refurbished Unit Makes Sense

OEM lead times for Quantum accessories can stretch for weeks when production schedules are tight. A verified surplus or refurbished unit removes that wait. Autronexa sources these connectors from decommissioned Quantum systems and tests each unit against the original Schneider Electric datasheet: channel continuity, connector pin integrity, and cable shielding are checked before the part is listed. You get a genuine part with a known history, not a grey-market clone with unknown provenance. For maintenance teams holding older Quantum installations, this is often the only practical way to keep spare inventory without paying full list price for new stock. Every unit ships with clear condition notes and current lead-time confirmation.

Figure 2: Technical layout and connection details for the Schneider Electric ABFM32H300 Cabled connector.

Selection and Sourcing Guide

Before ordering, confirm the exact part number and connector type required by your Quantum rack. This unit uses HE10 termination and 20 ways per connector; mixing it with a different terminal style will not seat correctly. Check whether your application needs the full 32-channel split or a single 16-channel group, since the two-connector design serves both. Ask your supplier to confirm cable length and shielding condition, especially if the unit is refurbished. Autronexa provides photos and test notes on request so you can verify the part matches your panel. For current lifecycle status and availability, contact the sourcing team directly. Please verify current lifecycle status and availability with Autronexa before ordering.

Frequently asked questions

Is this ABFM32H300 a genuine Schneider Electric part or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. The ABFM32H300 we supply is genuine Schneider Electric surplus or refurbished stock, not a copy.

What condition will the ABFM32H300 arrive in?

Our default condition is refurbished: the connector is tested for channel continuity, connector pin integrity, and cable shielding before shipping. Surplus units are also available; condition notes are provided with each quote.

How fast can you ship the ABFM32H300?

Lead time depends on current stock. Contact Autronexa with your required quantity and we will confirm availability and shipping schedule the same business day.

Does this connector work with my Modicon Quantum PLC?

Yes, the ABFM32H300 is designed as a connection accessory for Modicon Quantum PLCs with relay I/O signals. It uses HE10 connectors and 20 ways per connector, matching the Quantum front-panel layout.

Is the ABFM32H300 still supported by Schneider Electric?

Lifecycle status varies. Contact Autronexa to verify current OEM support status and availability before ordering.

Related & compatible parts

Schneider Electric · Advantys STB

STBACO0120

Genuine surplus Schneider STBACO0120 analog output module — 1-channel 4-20 mA, 15-bit, hot-swappable, verified and ready to ship.

In Stock

Schneider Electric

TSXRKY12

Genuine surplus Schneider TSXRKY12 12-slot non-extendable rack for Modicon Premium — verified condition, ready to ship.

In Stock

Schneider Electric

ATV310HU15N4S

Genuine surplus Schneider ATV310HU15N4S 1.5 kW drive — verified, tested, and ready to ship with clear lead times.

In Stock

Schneider Electric

ATV71HC11N4

Genuine surplus ATV71HC11N4: 110 kW, 480 V, Modbus, integrated EMC filter. Verified condition, faster than OEM lead time.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: ABFM32H300

We reply within one business day.

ABFM32H300 Quote reply within 1 business day