Schneider Electric I/O & Function Modules Advantys STB

Schneider Electric STBACO0120

Output module

Manufacturer: Schneider Electric Part Number: STBACO0120

Genuine surplus Schneider STBACO0120 analog output module — 1-channel 4-20 mA, 15-bit, hot-swappable, verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Module type Standard analog output module
Channels 1
Signal type 4-20 mA current
Resolution 15 bits + sign
Isolation 1500V DC field-to-bus
Hot swapping Yes
Supply voltage 24V DC (via PDM)
I/O base STBXBA1000 (13.9 mm)
PDM STBPDT3100 (24V DC)
Protection rating IP20

Description

The Schneider Electric STBACO0120 is a standard 1-channel analog current output module for the Advantys STB distributed I/O system, delivering a 4-20 mA signal at 15-bit plus sign resolution. Maintenance teams running existing STB islands need genuine units, not clones, and Autronexa supplies verified surplus and refurbished stock with clear lead times.

What This Module Does in an STB Island

This standard analog output module occupies one position on an STB I/O base and drives a single 4-20 mA current loop — the signal format most valve positioners, variable-frequency drives and analog panel meters expect. Resolution of 15 bits plus sign gives the loop fine control steps, which matters when a small output change moves a control valve. Field-to-bus isolation is rated 1500V DC, separating the current loop from the island bus so a field wiring fault does not propagate into the communication side. The module is hot-swappable, so a maintenance engineer can replace it with the island powered, provided site procedures permit live work. It draws 24V DC through the PDM, and the reference configuration pairs it with the STBXBA1000 I/O base at 13.9 mm width and the STBPDT3100 PDM. The housing carries an IP20 protection rating, so it belongs inside an enclosure, not on an open machine frame.

Figure 1: Front view of the Schneider Electric STBACO0120 Output module showing its physical design and enclosure.

Sourcing a Discontinued Advantys STB Output Module

Schneider Electric lists this module as discontinued, superseded by the Modicon X80 range. That status changes the sourcing calculation: OEM channels no longer stock it new, and a migration to X80 means re-engineering the rack, wiring and often the control program. For a plant that simply needs to keep an existing STB island running, a tested surplus or refurbished unit is the practical route. Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference, then functionally checks it before dispatch. You get a genuine part with a known condition rather than an unknown-history pull, and the cost sits well below the last OEM list price for this family.

Figure 2: Technical layout and connection details for the Schneider Electric STBACO0120 Output module.

Selection and Service Checks Before You Order

Before committing, confirm the exact model string on your existing module and match it to this listing — the STB family uses several analog output variants that look alike but differ in channel count and signal type. Check that your island uses the STBXBA1000 base and STBPDT3100 PDM, since the module depends on both. Decide whether you need a surplus unit or a refurbished one; both are genuine, and the difference is inspection depth, which our team can explain for your application. On the reliability side, inspect the base contacts and PDM connections at each scheduled maintenance interval, keep the enclosure sealed to preserve the IP20 rating, and follow Schneider Electric’s published safety manual for any replacement work. Please verify current lifecycle status and availability with Autronexa before ordering.

📄 Download Datasheet: STBACO0120-datasheet.pdf

Frequently asked questions

Is this STBACO0120 a genuine Schneider Electric module or a clone?

Every unit is verified against OEM datasheet markings and part-number cross-reference before it enters stock. Autronexa supplies genuine surplus and refurbished Schneider Electric components, not grey-market copies.

What condition will the module arrive in?

Units ship in refurbished condition by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa if you need a surplus unit instead and we will confirm what is on hand.

How fast can you ship a discontinued Advantys STB output module?

Lead time depends on current stock. Contact Autronexa with the part number for verified condition and current availability before you place the order.

Does this module work with my existing STB island?

It is designed for the Advantys STB system and pairs with the STBXBA1000 I/O base and STBPDT3100 PDM at 24V DC. Confirm your base and PDM part numbers against these before ordering.

Is the STBACO0120 still supported by Schneider Electric?

Schneider Electric lists it as discontinued, superseded by the Modicon X80 range. Contact Autronexa to verify OEM support status and to discuss keeping your existing STB island running.

Related & compatible parts

Schneider Electric

BMXDDI1604T

Genuine surplus Schneider Electric BMXDDI1604T Modicon X80 16-channel 24 V DC input module with per-channel diagnostics, verified and…

In Stock

Schneider Electric

TSXSUP1011

Genuine surplus Schneider Electric TSXSUP1011 power supply for TSX Micro PLCs — 24 V AC/DC input, 24 V…

In Stock

Schneider Electric

170ADM35015

Genuine surplus Schneider Electric 170ADM35015 discrete I/O module — 16 sinking inputs, 16 sourcing outputs, verified and ready…

In Stock

Schneider Electric

BMEP584040S

Genuine surplus BMEP584040S safety processor — verified, tested, and ready to ship from Autronexa.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: STBACO0120

We reply within one business day.

STBACO0120 Quote reply within 1 business day