Bently Nevada

Bently Nevada 3500/22M-01-01-00

TDI Module and I/O

Manufacturer: Bently Nevada Part Number: 3500/22M-01-01-00

Bently Nevada 3500/22M-01-01-00 TDI Module and I/O. I/O Module Type: 10Base-T/100Base-TX Ethernet I/O module; Power Consumption: 10.5 Watts.

  • New Surplus
  • Available on request
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

Ships within 7 business days

Technical specifications

Manufacturer Bently Nevada
Product No. 3500/22M-01-01-00
Product Type 3500/22M TDI Module and I/O
Transient Data Interface Type 01 = Standard (use for standard monitoring applications)
I/O Module Type 01 = 10Base-T/100Base-TX Ethernet I/O module
Agency Approval Option 00 = None
Power Consumption 10.5 Watts
Front Panel Data USB-B
10Base-T/100Base-TX I/O 10Base-T or 100Base-TX Ethernet, autosensing
100Base-FX I/O 100Base-FX Fiber-Optic Ethernet
OK LED Indicates when the 3500/22M is operating properly
TX/RX LED Indicates when the 3500/22M is communicating with the other modules in the rack
TM LED Indicates when the 3500 rack is in Trip Multiply mode
CONFIG OK LED Indicates that the 3500 rack has a valid configuration
OK Relay Function Indicates when the 3500 rack is operating normally or when a fault has been detected within the rack. User can select either an "OPEN" or "CLOSED" contact to annunciate a NOT OK condition. This relay always operates as "Normally Energized".
OK Relay Ratings Standard OK Relay rated to 5 A @ 24 Vdc/120 Vac, 120 Watts/600 VA switched power (maximum); OK Relay with gold-plated contacts rated down to 1 mA @ 1 Vdc (minimum)
Arc Protection Arc suppressors are provided
Trip Multiply Used to place the 3500 rack in Trip Multiply; maximum current <1 mAdc, dry contact to common
Alarm Inhibit Used to inhibit all alarms in the 3500 rack; maximum current <1 mAdc, dry contact to common
Rack Reset Used to clear latched alarms and Timed OK Channel Defeat; maximum current <1 mAdc, dry contact to common
Front Panel Communications USB-B
Front Panel Protocol Supported BN Host Protocol
Baud Rate 115.2 kbaud maximum (auto-baud capable)
USB Cable Length 5 meters (16.4 ft) maximum; a 3 meter (9.8 ft) cable is included with the 3500 rack
10Base-T/100Base-TX Ethernet I/O Communications Ethernet, 10Base-T and 100Base TX; conforms to IEEE802.3
10Base-T/100Base-TX Connection RJ-45 (telephone jack style); cable length 100 metres (328 feet) maximum
100Base-FX Ethernet I/O Communications Ethernet, 100Base-FX fiber optic, full duplex multimode; conforms to IEEE802.3u
100Base-FX Connection MT-RJ Male fiber optic connector; cable length 2000 metres (6560 feet) maximum, multimode fiber optic cable
Operating Temperature -30 °C to +65 °C (-22 °F to +149 °F)
Storage Temperature -40 °C to +85 °C (-40 °F to +185 °F)
Humidity 95%, non-condensing
Battery Life Powered TDI 38 years @ 50 °C (122 °F); unpowered TDI 12 years @ 50 °C (122 °F)
TDI Module Dimensions (H x W x D) 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in)
TDI Module Weight 0.91 kg (2.0 lbs)
I/O Module Dimensions (H x W x D) 241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in)
I/O Module Weight 0.20 kg (0.44 lbs)
Rack Space Requirements TDI Module: 1 full-height front slot. I/O Modules: 1 full-height rear slot.
Weight 1.11 Kg

Description

The Bently Nevada Bently Nevada 3500/22M-01-01-00 TDI Module and I/O – Datasheet, Specs & In Stock is a 3500/22m tdi module and i/o supplied for replacement and new-build use in industrial control installations. Every rating below is taken from the manufacturer documentation for this part number. Headline figures: power consumption 10.5 Watts; tdi module weight 0.91 kg (2.0 lbs); operating temperature -30 °C to +65 °C (-22 °F to +149 °F)

Electrical Ratings

Power Consumption is 10.5 Watts. size the power supply and the rack load around this figure; it is the draw the part places on the supply it is installed in.

Mechanical & Dimensional Data

USB Cable Length is 5 meters (16.4 ft) maximum; a 3 meter (9.8 ft) cable is included with the 3500 rack. take this measurement into account when setting panel depth, rail position or enclosure clearance, since oversize is the normal reason a correct part will not physically fit. TDI Module Dimensions (H x W x D) is 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in). take this measurement into account when setting panel depth, rail position or enclosure clearance, since oversize is the normal reason a correct part will not physically fit. TDI Module Weight is 0.91 kg (2.0 lbs). factor this into lifting, rail-loading and shipping decisions; it is also the figure to quote when a handling study is required. I/O Module Dimensions (H x W x D) is 241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in). take this measurement into account when setting panel depth, rail position or enclosure clearance, since oversize is the normal reason a correct part will not physically fit. I/O Module Weight is 0.20 kg (0.44 lbs). factor this into lifting, rail-loading and shipping decisions; it is also the figure to quote when a handling study is required. Weight is 1.11 Kg. factor this into lifting, rail-loading and shipping decisions; it is also the figure to quote when a handling study is required.

Environmental & Compliance Ratings

Transient Data Interface Type is 01 = Standard (use for standard monitoring applications). use this to confirm the part is acceptable in the classified area of the installation, and to support the documentation in the plant safety file. Agency Approval Option is 00 = None. use this to confirm the part is acceptable in the classified area of the installation, and to support the documentation in the plant safety file. Operating Temperature is -30 °C to +65 °C (-22 °F to +149 °F). check the enclosure temperature at the planned mounting location stays inside this band during the hottest operating period. Storage Temperature is -40 °C to +85 °C (-40 °F to +185 °F). observe this figure during transport and warehouse storage, which are not the same condition as operation. Humidity is 95%, non-condensing. maintain the stated humidity range in the cabinet; condensation is the usual cause of failure in equipment installed in humid plant rooms. Rack Space Requirements is TDI Module: 1 full-height front slot. I/O Modules: 1 full-height rear slot.. use this to confirm the part is acceptable in the classified area of the installation, and to support the documentation in the plant safety file.

Signal & Communication

OK Relay Function is Indicates when the 3500 rack is operating normally or when a fault has been detected within the rack. User can select either an "OPEN" or "CLOSED" contact to annunciate a NOT OK condition. This relay always operates as "Normally Energized".. check the switching capacity against the circuit it will interrupt, since relay contacts are commonly the limiting element in an installation. OK Relay Ratings is Standard OK Relay rated to 5 A @ 24 Vdc/120 Vac, 120 Watts/600 VA switched power (maximum); OK Relay with gold-plated contacts rated down to 1 mA @ 1 Vdc (minimum). check the switching capacity against the circuit it will interrupt, since relay contacts are commonly the limiting element in an installation. Trip Multiply is Used to place the 3500 rack in Trip Multiply; maximum current <1 mAdc, dry contact to common. check the switching capacity against the circuit it will interrupt, since relay contacts are commonly the limiting element in an installation. Alarm Inhibit is Used to inhibit all alarms in the 3500 rack; maximum current <1 mAdc, dry contact to common. check the switching capacity against the circuit it will interrupt, since relay contacts are commonly the limiting element in an installation. Front Panel Protocol Supported is BN Host Protocol. match this to the controller or host configuration on site, including addressing and termination. Baud Rate is 115.2 kbaud maximum (auto-baud capable). match this to the controller or host configuration on site, including addressing and termination. 10Base-T/100Base-TX Ethernet I/O Communications is Ethernet, 10Base-T and 100Base TX; conforms to IEEE802.3. match this to the controller or host configuration on site, including addressing and termination. 100Base-FX Ethernet I/O Communications is Ethernet, 100Base-FX fiber optic, full duplex multimode; conforms to IEEE802.3u. match this to the controller or host configuration on site, including addressing and termination.

Additional Verified Data

Product No. is 3500/22M-01-01-00. I/O Module Type is 01 = 10Base-T/100Base-TX Ethernet I/O module. Front Panel Data is USB-B. 10Base-T/100Base-TX I/O is 10Base-T or 100Base-TX Ethernet, autosensing. 100Base-FX I/O is 100Base-FX Fiber-Optic Ethernet. OK LED is Indicates when the 3500/22M is operating properly. TX/RX LED is Indicates when the 3500/22M is communicating with the other modules in the rack. TM LED is Indicates when the 3500 rack is in Trip Multiply mode. CONFIG OK LED is Indicates that the 3500 rack has a valid configuration. Arc Protection is Arc suppressors are provided. Rack Reset is Used to clear latched alarms and Timed OK Channel Defeat; maximum current <1 mAdc, dry contact to common. Front Panel Communications is USB-B. 10Base-T/100Base-TX Connection is RJ-45 (telephone jack style); cable length 100 metres (328 feet) maximum. 100Base-FX Connection is MT-RJ Male fiber optic connector; cable length 2000 metres (6560 feet) maximum, multimode fiber optic cable. Battery Life is Powered TDI 38 years @ 50 °C (122 °F); unpowered TDI 12 years @ 50 °C (122 °F).

Models in This Series

Autronexa currently lists this 3500/22m tdi module and i/o as the only model in its entry. Cross-reference requests for equivalent or superseded part numbers are handled on request.

Confirming the Correct Variant Before Ordering

Read the part number marked on the unit being replaced and compare it character by character with the ordering code above, including any option suffix. Check the values in the technical specification table of this page against the nameplate on the existing unit rather than against a previous purchase record. Confirm the power consumption available at the installation site is 10.5 Watts, which is the documented requirement for this model.

Request a Quote

Bently Nevada supplies the Bently Nevada 3500/22M-01-01-00 TDI Module and I/O – Datasheet, Specs & In Stock as a quote-based item. Send the part number, quantity and destination for current stock, lead time and pricing; no fixed price is published for this part.

Frequently asked questions

What is the Bently Nevada 3500/22M?

The 3500/22M is the Transient Data Interface (TDI) module with I/O for a 3500 machinery-protection rack, providing communications and data interface functions.

What I/O does the 3500/22M provide?

It provides 10Base-T/100Base-TX Ethernet I/O (autosensing) and 100Base-FX fiber-optic Ethernet I/O for communications with monitoring and asset-protection systems.

What is the power consumption of the 3500/22M?

The module has a typical power consumption of 10.5 watts.

What front-panel LEDs does the 3500/22M have?

OK, TX/RX, TM (Trip Multiply) and CONFIG OK LEDs indicate operating status, rack communications, Trip Multiply mode and valid configuration respectively.

What is the OK relay rating on the 3500/22M?

The standard OK relay is rated 5 A at 24 Vdc / 120 Vac (120 W / 600 VA switched maximum); a gold-plated-contact version is rated down to 1 mA at 1 Vdc (minimum).

What is the weight of the 3500/22M?

The 3500/22M TDI Module and I/O weighs 1.11 kg.

What is the operating temperature range of the 3500/22M-01-01-00?

The Bently Nevada 3500/22M-01-01-00 operating temperature is listed as -30 °C to +65 °C (-22 °F to +149 °F). Stay within the documented band during operation; storage limits may differ. Elevated ambient conditions can reduce the continuous current or power rating of the module.

What are the dimensions and weight of the 3500/22M-01-01-00?

The Bently Nevada 3500/22M-01-01-00 measures 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in) and weighs 0.91 kg (2.0 lbs). Confirm clearance and rack or panel space before ordering.

What is the 3500/22M-01-01-00 and what is it used for?

The Bently Nevada 3500/22M-01-01-00 is a 3500/22M TDI Module and I/O device. It is used in industrial control and automation systems where a verified part number and specification match are required for replacement or new design.

What supply voltage does the Bently Nevada 3500/22M-01-01-00 TDI Module and I/O - Datasheet, Specs & In Stock need?

The manufacturer documentation lists power consumption 10.5 Watts. for this model. Confirm the supply at the installation site matches, including any tolerance on the incoming feed, before the part is ordered.

What is the operating temperature range of the Bently Nevada 3500/22M-01-01-00 TDI Module and I/O - Datasheet, Specs & In Stock?

The documented operating range is -30 °C to +65 °C (-22 °F to +149 °F).. Check that the enclosure temperature at the planned mounting location stays inside this band during the hottest period of the operating year.

How much does the Bently Nevada 3500/22M-01-01-00 TDI Module and I/O - Datasheet, Specs & In Stock weigh?

The documented weight is 0.91 kg (2.0 lbs).. Use it for lifting, rail-loading and shipping decisions, and quote it when a handling study is required for the installation.

Related & compatible parts

Bently Nevada · 31000 / 32000 Series

31000-28-05-00-059-02-02

Bently Nevada 31000-28-05-00-059-02-02 Proximity Probe Housing. Fittings: Two 3/4-14 NPT fittings, one plug; O-Ring Material: Neoprene®.

Available on request

Bently Nevada · 31000 / 32000 Series

31000-28-10-00-010-01-02

Bently Nevada 31000-28-10-00-010-01-02 Proximity Probe Housing. Fittings: One 3/4-14 NPT fitting, two plugs; O-Ring Material: Neoprene®.

Available on request

Bently Nevada · 31000 / 32000 Series

31000-28-10-00-026-00-02

Bently Nevada 31000-28-10-00-026-00-02 Proximity Probe Housing. Sulfide (PPS) thermoplastic: containing conductive fibers.

Available on request

Bently Nevada · 31000 / 32000 Series

31000-28-05-15-026-06-02

Bently Nevada 31000-28-05-15-026-06-02 Proximity Probe Housing. Probe Cable Length: 0.5 m (20 in); O-Ring Material: Neoprene®.

Available on request

News & guides for Bently Nevada

View all articles

Request a quote for this part

Part number: 3500/22M-01-01-00

We reply within one business day.

3500/22M-01-01-00 Quote reply within 1 business day