Bently Nevada 3500 Machinery Protection System: Specifications and Configuration

The Bently Nevada 3500 Machinery Protection System is a rack-based, modular monitoring and protection platform for rotating machines such as turbines, compressors, pumps, and motors. It receives signals from proximity probes and other transducers, conditions them through monitor modules, and delivers vibration and position alarms, trips, and condition data. The 3500/15 power supply module provides universal AC input of 85 to 264 Vac rms at 47–63 Hz, or a 20 to 30 Vdc low-voltage DC option, with redundant power supported by two half-height rack slots. The 3500/22M Transient Data Interface module supplies 10Base-T/100Base-TX Ethernet I/O at 10.5 W. Monitor modules condition proximity, velocity, and axial thrust signals, while the 3500/42 Proximitor* interface connects directly to the 3300 XL probe. The rack provides relay and 4–20 mA outputs for integration with plant control and machinery shutdown systems. Monitor modules and a 3500/94M VGA display complete the rack configuration.
Modular rack architecture
The 3500 rack uses a slot-based layout. The power supply module occupies two half-height slots on the left side of the rack; both slots can hold a power supply at the same time, allowing redundant power supplies in a single rack.
Power supply input range
The 3500/15 universal AC power supply accepts 85 to 264 Vac rms at 47–63 Hz. A low-voltage DC variant supports 20 to 30 Vdc. Full rack current draw reaches a maximum of 11.0 A on low-voltage DC.
Physical footprint
The power supply module measures 120.7 mm × 50.8 mm × 251.5 mm (4.75 × 2.0 × 9.9 in) and weighs 1.39 kg (3.06 lb). The 3500/22M TDI module weighs 1.11 kg.
Data interface
The 3500/22M TDI module provides 10Base-T/100Base-TX Ethernet I/O with a front-panel USB-B port and 10.5 W power consumption, enabling transient data streaming to host systems.
Hazardous-area approvals
Agency approval options include ATEX, IECEx, and CSA for Class 1, Zone 2, as configured on units such as 3500/15-05-05-02. The exact approval depends on the module and site requirement.
3500 vs 3300 vs 32000
| Attribute | 3500 System | 3300 XL Probe | 32000 Housing |
|---|---|---|---|
| Primary function | Rack-based monitoring & protection | Shaft vibration & position measurement | Probe mounting assembly |
| Core construction | Rack with modules | PPS tip, AISI 304 case | Glass-reinforced PPS, AISI 304 sleeve |
| Hazard / ingress rating | Module approvals: ATEX / IECEx / CSA (Class 1, Zone 2) | IP66 (BASEEFA T07/0709) | Type 4X (CSA); IP66 (SC115582-1) |
| Mounting thread | — | 3/4-14 NPT | 3/4-14 NPT |
| Key dimension | 120.7 × 50.8 × 251.5 mm (PS module) | Standoff 40–155 mm | Penetration up to 470 mm |
| Weight | 1.39 kg (PS) / 1.11 kg (TDI) | 1.44 kg | — |
| Paired with | 3300 probe + 32000 housing | 32000 housing | 3300 XL probe |
Frequently asked questions
What is the input voltage range of the Bently Nevada 3500/15 power supply?
The 3500/15 universal AC power supply accepts 85 to 264 Vac rms at 47–63 Hz. A low-voltage DC option supports 20 to 30 Vdc. The full rack draws a maximum of 11.0 A on low-voltage DC. Two half-height slots allow redundant supplies.
How many modules fit in a 3500 machinery protection rack?
The 3500 rack uses full-height and half-height modules. The power supply occupies two half-height slots on the left; both can hold a supply at once for redundancy. Monitor, TDI, and display modules fill the remaining slots.
Does the 3500 system support hazardous-area installation?
Yes. Agency approval options include ATEX, IECEx, and CSA for Class 1, Zone 2, as configured on models such as 3500/15-05-05-02. Approval selection depends on the specific module and site requirement.
