Bently Nevada Vibration Monitoring 3500

Bently Nevada 3500/25 149369-01

3500 System Module

Manufacturer: Bently Nevada Part Number: 3500/25 149369-01

Bently Nevada 3500/25 149369-01 3500 System Module. Power Consumption: 3.2 Watts typical; Input Impedance: 21.8 kΩ minimum.

  • Available on request
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

Technical specifications

Manufacturer Bently Nevada
Product No. 3500/25 149369-01
Product Type Enhanced Keyphasor Module
Power Consumption 3.2 Watts typical
Input Impedance 21.8 kΩ minimum
Speed/Frequency Signal Ranges Input range of 1 to 1,200,000 cpm (0.017 to 20 kHz). Supports multiple events per revolution to a maximum of 20 kHz. Output range of 1 to 99,999 cpm (0.017 to 1667 Hz)
Speed/Frequency Signal Accuracy Specified at +25°C (+77°F). Non-processed Signals: 0.017 to 100 Hz … ±1 cpm 101 to 500 Hz … ±8 cpm 501 to 20 kHz … ±1% of cpm Processed Signals: 0.017 to 60 Hz … ±1 cpm 61 to 150 Hz … ±8 cpm 151 to 20 kHz … ±1% of cpm
Output Impedance 504 Ω maximum buffered output impedance.
Keyphasor Transducer Power Supply -24 Vdc, 40 mA maximum per channel.
OK LED Indicates when a fault has been detected in the Keyphasor Module.
TX/RX LED Indicates when the Keyphasor Module is communicating with the Rack Interface Module (RIM).
Storage Temperature -40°C to +85°C (-40°F to +185°F) Humidity 95%, non-condensing
Height x Width x Depth) 119.9 mm x 24.4 mm x 256.5 mm (4.72 in x 0.96 in x 10.10 in).

Description

The Bently Nevada 3500/25 149369-01 is a 3500 system module for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against programmable alarm setpoints inside the 3500 rack. and has a nominal power consumption of 3.2 watts typical It monitors critical rotating equipment such as turbines, compressors, and pumps, and communicates monitor status and measured values to the 3500 rack and to recorder outputs for machinery protection. Configuration is performed with 3500 Rack Configuration Software; no field calibration is required.

Product Identification

  • Manufacturer: Bently Nevada.
  • Product No.: 3500/25 149369-01.
  • Product Type: Enhanced Keyphasor Module.

Electrical & Signal

  • Power Consumption: 3.2 Watts typical.
  • Input Impedance: 21.8 kΩ minimum.
  • Speed/Frequency Signal Accuracy: Specified at +25°C (+77°F). Non-processed Signals: 0.017 to 100 Hz … ±1 cpm 101 to 500 Hz … ±8 cpm 501 to 20 kHz … ±1% of cpm Processed Signals: 0.017 to 60 Hz … ±1 cpm 61 to 150 Hz … ±8 cpm 151 to 20 kHz … ±1% of cpm.
  • Output Impedance: 504 Ω maximum buffered output impedance..

Environmental Ratings

  • Storage Temperature: -40°C to +85°C (-40°F to +185°F) Humidity 95%, non-condensing.

Specifications

  • Speed/Frequency Signal Ranges: Input range of 1 to 1,200,000 cpm (0.017 to 20 kHz). Supports multiple events per revolution to a maximum of 20 kHz. Output range of 1 to 99,999 cpm (0.017 to 1667 Hz).
  • Keyphasor Transducer Power Supply: -24 Vdc, 40 mA maximum per channel..
  • OK LED: Indicates when a fault has been detected in the Keyphasor Module..
  • TX/RX LED: Indicates when the Keyphasor Module is communicating with the Rack Interface Module (RIM)..
  • Height x Width x Depth): 119.9 mm x 24.4 mm x 256.5 mm (4.72 in x 0.96 in x 10.10 in)..

Model Comparison

Compare the 3500/25 149369-01 against the closest Bently Nevada configurations below to confirm ordering options, ratings and physical interchange.

Model Product No. Power Consumption Output Impedance OK LED TX/RX LED Manufacturer Product Type Input Impedance
3500/25 149369-01 3500/25 149369-01 3.2 Watts typical 504 Ω maximum buffered output impedance. Indicates when a fault has been detected in the Keyphasor Module. Indicates when the Keyphasor Module is communicating with the Rack Interface Module (RIM). Bently Nevada Enhanced Keyphasor Module 21.8 kΩ minimum
3500/15 133292-01 3500/15 133292-01 — — — — Bently Nevada — —
3500/15 133300-01 3500/15 133300-01 — — — — Bently Nevada — —
3500/42M 140734-02 140734-02 — 550 Ω Indicates when the 3500/42M Proximitor Seismic Monitor is operating properly. Indicates when the 3500/42M Proximitor Seismic Monitor is communicating with other modules in the 3500 rack. Bently Nevada — —
3500/42M 176449-02 176449-02 — 550 Ω Indicates when the 3500/42M Proximitor Seismic Monitor is operating properly. Indicates when the 3500/42M Proximitor Seismic Monitor is communicating with other modules in the 3500 rack. Bently Nevada — —
3500/61 133819-02 133819-02 3500/61 Nominal consumption of 9 watts. — — — Bently Nevada — —
3500/61 163179-02 163179-02 3500/61 Nominal consumption of 9 watts. — — — Bently Nevada — —

Frequently asked questions

What is the Bently Nevada 3500/25 149369-01 and what does it do?

The Bently Nevada 3500/25 149369-01 is a component for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against user-programmable alarm setpoints within the 3500 rack.

What is the power consumption of the 3500/25 149369-01?

The 3500/25 149369-01 has a nominal power consumption of 3.2 Watts typical It draws power from the 3500 rack backplane and requires no separate supply.

How is the 3500/25 149369-01 installed and configured?

The 3500/25 149369-01 mounts in a 3500 rack rear slot and draws power from the rack backplane. Channels are configured with 3500 Rack Configuration Software; alarm setpoints and full-scale ranges are set in software with no field calibration required.

Related & compatible parts

Bently Nevada · 3500

3500/94M-07-12-01

Bently Nevada 3500/94M-07-12-01 VGA Display Module. Display Size and Mounting: Router box, no display; Input range: 22.5 to…

Available on request

Bently Nevada · 31000 / 32000 Series

31000-28-05-15-026-06-02

Bently Nevada 31000-28-05-15-026-06-02 Proximity Probe Housing. Probe Cable Length: 0.5 m (20 in); O-Ring Material: Neoprene®.

Available on request

Bently Nevada · 146054 / 146055 Series

146055-05-02-05

Bently Nevada 146055-05-02-05 Power Supplies. Probe Case Thread: 3/8-24; probe lengths: 0.5, 1, 2, 5, or 9. Factory…

Available on request

Bently Nevada · 31000 / 32000 Series

32000-28-05-05-110-03-02

Bently Nevada 32000-28-05-05-110-03-02 Proximity Probe Housing. Probe Penetration: 110mm; Standoff Adapter: 50mm.

Available on request

News & guides for Bently Nevada

View all articles

Request a quote for this part

Part number: 3500/25 149369-01

We reply within one business day.

3500/25 149369-01 Quote reply within 1 business day