Bently Nevada Vibration Monitoring 3500/40M

Bently Nevada 3500/40M-03-01

Proximitor Monitor

Manufacturer: Bently Nevada Part Number: 3500/40M-03-01

Bently Nevada 3500/40M-03-01 Proximitor Monitor. Hazardous Area Approval: 01 — cNRTLus (Class I, Division 2); Category: Monitor order code.

  • Available on request
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

Technical specifications

Manufacturer Bently Nevada
Product No. 3500/40M-03-01
Product Type Proximitor Monitor
Product Series 3500 Machinery Protection Systems
Channels Four
Signal Input Accepts 1 to 4 Bently Nevada proximity transducer signals
I/O Module Type 03 — Proximitor I/O Module with Internal Barriers and Internal Terminations
Hazardous Area Approval 01 — cNRTLus (Class I, Division 2)
Hazardous Area Certification the 3500/40M monitor together with its I/O Module option, as certified in the Hazardous Area Approvals section of datasheet 141535 Rev. M, page 7
Category Monitor order code
Power Consumption 7.7 W typical
Operating Temperature 0 °C to +65 °C (32 °F to +150 °F) (when used with Internal Barrier I/O Module, Internal Termination)
Storage Temperature -40 °C to +85 °C (-40 °F to +185 °F)
Relative Humidity 95 %, noncondensing
Dimensions (H x W x D) monitor module (main board): 241.3 × 24.4 × 241.8 mm (9.50 in × 0.96 in × 9.52 in); I/O Modules (barrier): 241.3 × 24.4 × 163.1 mm (9.50 in × 0.96 in × 6.42 in)
Weight monitor module (main board): 0.91 kg (2.0 lb); I/O Modules (barrier): 0.46 kg (1.01 lb)
Lifecycle Current
Source datasheet 141535 Rev. M p2, p5
Manufacturer Note Source conflict retained: the LED descriptions in datasheet 141535 Rev. M are worded for the "3500/40M SIL Proximitor", while no SIL rating or certification is published in this datasheet; SIL suitability must not be inferred. Barrier circuit parameters recorded here are the CSA-NRTL/C and ATEX / IECEx figures printed in the Barrier Parameters section of datasheet 141535 Rev. M; the datasheet publishes no separate non-barrier figure.

Description

The Bently Nevada 3500/40M-03-01 is a four-channel Proximitor Monitor. It accepts 1 to 4 proximity transducer signals and compares them against programmable alarm setpoints.

Product Identification

  • Manufacturer: Bently Nevada.
  • Product No.: 3500/40M-03-01.
  • Product Type: Proximitor Monitor.
  • Product Series: 3500 Machinery Protection Systems.
  • Category: Monitor order code.

Electrical & Signal

  • Channels: Four.
  • Signal Input: Accepts 1 to 4 Bently Nevada proximity transducer signals.
  • I/O Module Type: 03 — Proximitor I/O Module with Internal Barriers and Internal Terminations.
  • Power Consumption: 7.7 W typical.
  • Hazardous Area Approval: 01 — cNRTLus (Class I, Division 2).
  • Hazardous Area Certification: the 3500/40M monitor together with its I/O Module option, as certified in the Hazardous Area Approvals section of datasheet 141535 Rev. M, page 7.

Environmental Ratings

  • Operating Temperature: 0 °C to +65 °C (32 °F to +150 °F) (when used with Internal Barrier I/O Module, Internal Termination).
  • Storage Temperature: -40 °C to +85 °C (-40 °F to +185 °F).
  • Relative Humidity: 95 %, noncondensing.

Mechanical & Physical

  • Dimensions (H x W x D): monitor module (main board): 241.3 × 24.4 × 241.8 mm (9.50 in × 0.96 in × 9.52 in); I/O Modules (barrier): 241.3 × 24.4 × 163.1 mm (9.50 in × 0.96 in × 6.42 in).
  • Weight: monitor module (main board): 0.91 kg (2.0 lb); I/O Modules (barrier): 0.46 kg (1.01 lb).

Lifecycle & Source

  • Lifecycle: Current.
  • Source: datasheet 141535 Rev. M p2, p5.
  • Manufacturer Note: Source conflict retained: the LED descriptions in datasheet 141535 Rev. M are worded for the "3500/40M SIL Proximitor", while no SIL rating or certification is published in this datasheet; SIL suitability must not be inferred.
    Barrier circuit parameters recorded here are the CSA-NRTL/C and ATEX / IECEx figures printed in the Barrier Parameters section of datasheet 141535 Rev. M; the datasheet publishes no separate non-barrier figure..

Model Comparison

Model I/O Module Type Hazardous Area Approval Power Consumption Operating Temperature
3500/40M-01-00 01 — Proximitor I/O Module with Internal Termination 00 — None 7.7 W typical -30 °C to +65 °C (-22 °F to +150 °F) (when used with Internal/External Termination I/O Module)
3500/40M-01-01 01 — Proximitor I/O Module with Internal Termination 01 — cNRTLus (Class I, Division 2) 7.7 W typical -30 °C to +65 °C (-22 °F to +150 °F) (when used with Internal/External Termination I/O Module)
3500/40M-02-00 02 — Proximitor I/O Module with External Terminations 00 — None 7.7 W typical -30 °C to +65 °C (-22 °F to +150 °F) (when used with Internal/External Termination I/O Module)
3500/40M-02-01 02 — Proximitor I/O Module with External Terminations 01 — cNRTLus (Class I, Division 2) 7.7 W typical -30 °C to +65 °C (-22 °F to +150 °F) (when used with Internal/External Termination I/O Module)
3500/40M-03-00 03 — Proximitor I/O Module with Internal Barriers and Internal Terminations 00 — None 7.7 W typical 0 °C to +65 °C (32 °F to +150 °F) (when used with Internal Barrier I/O Module, Internal Termination)
3500/40M-03-01 03 — Proximitor I/O Module with Internal Barriers and Internal Terminations 01 — cNRTLus (Class I, Division 2) 7.7 W typical 0 °C to +65 °C (32 °F to +150 °F) (when used with Internal Barrier I/O Module, Internal Termination)
3500/40M-03-02 03 — Proximitor I/O Module with Internal Barriers and Internal Terminations 02 — ATEX / IECEx / CSA (Class I, Zone 2) 7.7 W typical 0 °C to +65 °C (32 °F to +150 °F) (when used with Internal Barrier I/O Module, Internal Termination)

Configuration & Ordering — 3500/40M-03-01

The 3500/40M-03-01 (Proximitor Monitor) is defined by the ordering codes below, taken from its configuration table. Each code selects a specific option for this Bently Nevada variant within the 3500 / 31000 machinery protection portfolio.

  • I/O Module Type: code 03 — Proximitor I/O Module with Internal Barriers and Internal Terminations
  • Hazardous Area Approval: code 01 — cNRTLus (Class I, Division 2)

Its primary option code 03 selects Proximitor I/O Module with Internal Barriers and Internal Terminations, which distinguishes the 3500/40M-03-01 from other Proximitor Monitor configurations. Selecting these codes together yields the exact 3500/40M-03-01 build specified for order.

Frequently asked questions

What is the Bently Nevada 3500/40M-03-01 and what does it monitor?

The Bently Nevada 3500/40M-03-01 is a four-channel Proximitor Monitor in the 3500 Machinery Protection Systems family. It conditions 1 to 4 Bently Nevada proximity transducer signals into vibration and position static values and compares them against user-programmable alarm setpoints.

What input signals does the 3500/40M-03-01 accept?

The 3500/40M-03-01 accepts 1 to 4 Bently Nevada proximity transducer signals Each channel is conditioned into vibration and position static values and evaluated against programmable alarm setpoints within the 3500 monitor rack.

What is the operating temperature range of the 3500/40M-03-01?

The 3500/40M-03-01 operates within 0 °C to +65 °C (32 °F to +150 °F) (when used with Internal Barrier I/O Module, Internal Termination) The storage temperature range is -40 °C to +85 °C (-40 °F to +185 °F). Stay within the published ambient band during operation.

What hazardous area approval does the 3500/40M-03-01 carry?

The 3500/40M-03-01 is ordered with hazardous area approval option 01 — cNRTLus (Class I, Division 2) Consult datasheet 141535 Rev. M, page 7 for the certified approvals applicable to this I/O Module option.

What is the lifecycle status of the 3500/40M-03-01?

The Bently Nevada 3500/40M-03-01 has a lifecycle status of Current, as published in datasheet 141535 Rev. M. Confirm current availability and lead time with the supplier before specifying it in a new design.

Related & compatible parts

Bently Nevada · 3500

3500/61-02-01

Bently Nevada 3500/61-02-01 Temperature Monitors with Recorder Outputs. Bulkhead Rack: ±3 °C at 25 °C (±5.4 °F at…

Available on request

Bently Nevada · 3500

3500/42M 176449-02

Bently Nevada 3500/42M 176449-02 3500/42m Proximitor Seismic Monitor. Full Scale 0-0.5: ±3% typical; Full Scale 0-1.0: ±2% typical.

Available on request

Bently Nevada · 330102 / 330103 / 330104 Probes

330102-00-40-10-01-05

Bently Nevada 330102-00-40-10-01-05 Proximity Probes & Sensors. Agency Approval: CSA, ATEX, IECEx Approvals. New surplus stock, ships within…

Available on request

Bently Nevada · 3500

3500/61-01-02

Bently Nevada 3500/61-01-02 Temperature Monitors with Recorder Outputs. Bulkhead Rack: ±3 °C at 25 °C (±5.4 °F at…

Available on request

News & guides for Bently Nevada

View all articles

Request a quote for this part

Part number: 3500/40M-03-01

We reply within one business day.

3500/40M-03-01 Quote reply within 1 business day