Bently Nevada Vibration Monitoring 3500
Bently Nevada 3500/42-02-01
3500 System Module
Bently Nevada 3500/42-02-01 3500 System Module. Power consumption: 7.7 watts, typical; Output Impedance: 550 Ω.
- Available on request
Availability & pricing
Pricing is available on request — send an RFQ for a same-day quote.
Technical specifications
| Manufacturer | Bently Nevada |
|---|---|
| Product No. | 3500/42-02-01 |
| Product Type | Proximitor Seismic Monitor |
| Signal | Accepts from 1 to 4 proximity, velocity or acceleration transducer signals |
| Power consumption | 7.7 watts, typical |
| Standard I/O | 10 kΩ (Proximitor and acceleration inputs) |
| Sensitivity | Radial Vibration: 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) |
| Thrust | 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) |
| Eccentricity | 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) |
| Differential Expansion | 0.394 mV/μm (10 mV/mil) or 0.787 mV/μm (20 mV/mil) REBAM ; 40 mV/μm (1000 mV/mil) or 80 mV/μm (2000 mV/mil) |
| Acceleration & Acceleration2 | 10 mV/ (m/s2) (100 mV/g) |
| OK LED | Indicates when the 3500/42M Proximitor Seismic Monitor is operating properly. |
| TX/RX LED | Indicates when the 3500/42M Proximitor Seismic Monitor is communicating with other modules in the 3500 rack. |
| Bypass LED | Indicates when the 3500/42M Proximitor Seismic Monitor is in Bypass Mode. |
| Buffered Transducer Outputs | The front of each monitor has one coaxial connector for each channel. |
| Output Impedance | 550 Ω |
| Transducer Power Supply | -24 Vdc |
| Resolution | 0.3662 µA per bit ±0.25% error at room temperature ±0.7% error over temperature range |
| Shaft Absolute Buffered Outputs | The Shaft Absolute I/O modules have one output for each channel group. |
| Shaft Absolute Output Impedance | 300 Ω |
Description
The Bently Nevada 3500/42-02-01 is a 3500 system module for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against programmable alarm setpoints inside the 3500 rack. It monitors critical rotating equipment such as turbines, compressors, and pumps, and communicates monitor status and measured values to the 3500 rack and to recorder outputs for machinery protection. Configuration is performed with 3500 Rack Configuration Software; no field calibration is required.
Product Identification
- Manufacturer: Bently Nevada.
- Product No.: 3500/42-02-01.
- Product Type: Proximitor Seismic Monitor.
Electrical & Signal
- Power consumption: 7.7 watts, typical.
- Output Impedance: 550 Ω.
- Resolution: 0.3662 µA per bit ±0.25% error at room temperature ±0.7% error over temperature range.
- Shaft Absolute Output Impedance: 300 Ω.
Specifications
- Signal: Accepts from 1 to 4 proximity, velocity or acceleration transducer signals.
- Standard I/O: 10 kΩ (Proximitor and acceleration inputs).
- Sensitivity: Radial Vibration: 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil).
- Thrust: 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil).
- Eccentricity: 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil).
- Differential Expansion: 0.394 mV/μm (10 mV/mil) or 0.787 mV/μm (20 mV/mil) REBAM ; 40 mV/μm (1000 mV/mil) or 80 mV/μm (2000 mV/mil).
- Acceleration & Acceleration2: 10 mV/ (m/s2) (100 mV/g).
- OK LED: Indicates when the 3500/42M Proximitor Seismic Monitor is operating properly..
- TX/RX LED: Indicates when the 3500/42M Proximitor Seismic Monitor is communicating with other modules in the 3500 rack..
- Bypass LED: Indicates when the 3500/42M Proximitor Seismic Monitor is in Bypass Mode..
- Buffered Transducer Outputs: The front of each monitor has one coaxial connector for each channel..
- Transducer Power Supply: -24 Vdc.
- Shaft Absolute Buffered Outputs: The Shaft Absolute I/O modules have one output for each channel group..
Model Comparison
Compare the 3500/42-02-01 against the closest Bently Nevada configurations below to confirm ordering options, ratings and physical interchange.
| Model | Product No. | Manufacturer | Signal | Power consumption | Standard I/O | Sensitivity | Thrust | Eccentricity |
|---|---|---|---|---|---|---|---|---|
| 3500/42-02-01 | 3500/42-02-01 | Bently Nevada | Accepts from 1 to 4 proximity, velocity or acceleration transducer signals | 7.7 watts, typical | 10 kΩ (Proximitor and acceleration inputs) | Radial Vibration: 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) | 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) | 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) |
| 3500/42-02-00 | 3500/42-02-00 | Bently Nevada | Accepts from 1 to 4 proximity, velocity or acceleration transducer signals | 7.7 watts, typical | 10 kΩ (Proximitor and acceleration inputs) | Radial Vibration: 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) | 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) | 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) |
| 3500/42-06-01 | 3500/42-06-01 | Bently Nevada | Accepts from 1 to 4 proximity, velocity or acceleration transducer signals | 7.7 watts, typical | 10 kΩ (Proximitor and acceleration inputs) | Radial Vibration: 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) | 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) | 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) |
| 3500/42-01-02 | 3500/42-01-02 | Bently Nevada | Accepts from 1 to 4 proximity, velocity or acceleration transducer signals | 7.7 watts, typical | 10 kΩ (Proximitor and acceleration inputs) | Radial Vibration: 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) | 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) | 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) |
| 3500/42-04-00 | 3500/42-04-00 | Bently Nevada | Accepts from 1 to 4 proximity, velocity or acceleration transducer signals | 7.7 watts, typical | 10 kΩ (Proximitor and acceleration inputs) | Radial Vibration: 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) | 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) | 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) |
| 3500/42-04-02 | 3500/42-04-02 | Bently Nevada | Accepts from 1 to 4 proximity, velocity or acceleration transducer signals | 7.7 watts, typical | 10 kΩ (Proximitor and acceleration inputs) | Radial Vibration: 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) | 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) | 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) |
| 3500/42-06-00 | 3500/42-06-00 | Bently Nevada | Accepts from 1 to 4 proximity, velocity or acceleration transducer signals | 7.7 watts, typical | 10 kΩ (Proximitor and acceleration inputs) | Radial Vibration: 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) | 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) | 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) |
Frequently asked questions
What is the Bently Nevada 3500/42-02-01 and what does it do?
The Bently Nevada 3500/42-02-01 is a component for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against user-programmable alarm setpoints within the 3500 rack.
How is the 3500/42-02-01 installed and configured?
The 3500/42-02-01 mounts in a 3500 rack rear slot and draws power from the rack backplane. Channels are configured with 3500 Rack Configuration Software; alarm setpoints and full-scale ranges are set in software with no field calibration required.
Related & compatible parts
Bently Nevada
107770-03-02
Genuine Bently Nevada 107770-03-02 velocity transducer housing, CENELEC approved with 1/2-14 NPT explosion-proof cable exit. Verified surplus and…
Bently Nevada · 3500/40M
3500/40M-01-01
Bently Nevada 3500/40M-01-01 Proximitor Monitor. Hazardous Area Approval: 01 — cNRTLus (Class I, Division 2); Category: Monitor order…
Bently Nevada · 31000 / 32000 Series
31000-28-05-00-063-01-02
Bently Nevada 31000-28-05-00-063-01-02 Proximity Probe Housing. Fittings: One 3/4-14 NPT fitting, two plugs; O-Ring Material: Neoprene®.
Bently Nevada
3500/15-05-05 106M1081-01
Bently Nevada 3500/15-05-05 106M1081-01 AC and DC Power Supply Module. Input Frequency: 47 to 63 Hz. Weight is…
News & guides for Bently Nevada
Bently Nevada AnomAlert: Motor Anomaly Detection Without Sensors
TL;DR: The Bently Nevada AnomAlert is a motor anomaly detector that watches a three-phase motor through its voltage and current…
Bently Nevada 3500/06 Weatherproof Housing: Ratings, Purging and Mounting Limits
TL;DR: The weatherproof enclosure for a Bently Nevada 3500 rack is the 3500/06, not the 3500/01 — 3500/01 is the…
Bently Nevada 3500/91 EGD Gateway: Mark VIe Interface, Slots and Limits
TL;DR: The Bently Nevada 3500/91 is the EGD (Ethernet Global Data) communication gateway for a 3500 rack. It publishes rack,…
Bently Nevada 3500/50M Tachometer Module: Channels, Alarms, Spares
The 3500/50M is a two-channel speed module with no onboard relay contacts and no numeric display. What it measures, how…
Bently Nevada Orbit 60 conneX: Bidirectional DCS Interface
Bently Nevada’s Orbit 60 condition monitoring platform connects to the rest of the plant through conneX—a bidirectional digital interface that…
Bently Nevada 3500 Machinery Protection System: Specifications and Configuration
The Bently Nevada 3500 Machinery Protection System is a rack-based, modular monitoring and protection platform for rotating machines such as…
Bently Nevada 3300 XL Proximity Probe: Materials, Ratings, and Mounting
The Bently Nevada 3300 XL proximity transducer system measures radial vibration, axial position, and phase reference on rotating machinery shafts.…
Bently Nevada 32000 Metric Probe Housing: Construction and Protection Ratings
The Bently Nevada 32000 Metric Proximity Probe Housing is a mounting assembly that secures a 3300 XL proximity probe in…
