Schneider Electric PLCs & Controllers

Schneider Electric BMEH584040C

Redundant processor module

Manufacturer: Schneider Electric Part Number: BMEH584040C

Genuine surplus Schneider BMEH584040C redundant processor for Modicon M580 — verified condition, faster than OEM lead times.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Product or Component Type Redundant processor module
Range of Product Modicon M580
Integrated Connection Type 1 Ethernet TCP/IP service port; 2 Ethernet TCP/IP device network; USB type mini B; 1 Ethernet HSBY port
Memory Description Expandable flash, 4 GB data storage; integrated RAM, 10 kB system memory; 16 MB program; 2048 kB data
Current Consumption 360 mA 24 V DC
Ambient Air Temperature for Operation -13…140 °F (-25…60 °C)
IP Degree of Protection IP20
Net Weight 1.872 lb(US) (0.849 kg)

Description

When a redundant processor in a Modicon M580 hot standby pair fails, the standby takes over — but the next failure could stop the line. Sourcing a genuine BMEH584040C redundant processor module quickly keeps that protection intact. Autronexa supplies verified surplus and refurbished units with practical lead times, so maintenance teams can restore redundancy without waiting on OEM backlogs.

What This Redundant Processor Does in an M580 System

The BMEH584040C is the conformal-coated redundant processor module for Schneider Electric’s Modicon M580 range. It runs as a hot standby pair: one processor acts as Primary, the other as Standby, and the HSBY link between them keeps the pair synchronised. The module carries 16 MB of integrated RAM for program and 2048 kB for data, plus 4 GB expandable flash for storage. It handles up to 16 remote I/O stations (X80 and Quantum drops) and 64 distributed equipment items, so it suits mid-to-large process and discrete architectures. For maintenance engineers, the front-panel LEDs are the first diagnostic stop: RUN, ERR, I/O, DL, BACKUP, ETH MS/NS, REMOTE RUN, A/B, PRIM, STBY, FORCED IO and Hsby Diag. A red ERR or BACKUP LED points to a processor or memory-card fault; a red I/O LED points downstream. Because the module is conformal coated, it tolerates the gas, dust and humidity classes listed in its environmental data — but coating does not make it immune to heat, so keep cabinet airflow within the -25…60 °C operating range.

Figure 1: Front view of the Schneider Electric BMEH584040C Redundant processor module showing its physical design and enclosure.

Why Genuine Surplus Fits This Module

Redundant processors are rarely stocked as spares at the plant level, yet they are exactly the part you need when a standby module faults. Autronexa’s surplus and refurbished stock gives you a tested alternative to a full OEM list-price order. Each unit is inspected against OEM datasheet markings and functionally verified by our sourcing team before it ships. The 650,000-hour MTBF figure reflects the platform’s design intent, not the age of a specific unit — which is why condition verification matters more than the number on the label. For a conformal-coated module, we check the coating for damage and confirm the Ethernet and HSBY ports are intact. If you run a hot standby pair, holding one verified spare on the shelf is the practical way to avoid a single-point failure becoming a full stop.

Figure 2: Technical layout and connection details for the Schneider Electric BMEH584040C Redundant processor module.

Sourcing Checklist Before You Order

Match the exact part number and coating variant: the C suffix denotes conformal coating, and mixing coated and uncoated modules in one rack is not good practice. Confirm your rack and power budget — the module draws 360 mA at 24 V DC via the rack supply. Verify firmware compatibility with your existing M580 CPU pair, and check that your remote I/O count stays within the 16-station and 64-device limits. Ask for the unit’s condition grade and test record. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine Schneider Electric BMEH584040C, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. We do not supply grey-market clones.

What condition will the module arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask for the specific condition grade and test record for the unit in stock.

How fast can you ship a BMEH584040C?

Lead time depends on current stock. Contact Autronexa for current lead time and availability before placing your order.

Can I use this module as a spare in an existing hot standby pair?

Yes, provided the firmware and coating variant match your existing pair. Confirm your rack power budget (360 mA at 24 V DC) and remote I/O count before installing.

Related & compatible parts

Schneider Electric

TM5ACBM11

Genuine surplus Schneider TM5ACBM11 bus base for Modicon TM5 — verified condition, practical lead times, and sourcing help…

In Stock

Schneider Electric · Advantys STB

STBNDP2212

Genuine surplus Schneider STBNDP2212 Advantys STB network interface module — PROFIBUS DP, 24V DC, verified condition, ready to…

In Stock

Schneider Electric

TM5SDO8TA

Genuine surplus Schneider Electric TM5SDO8TA discrete output module — 8 transistor outputs, 24V DC, 2A, verified and ready…

In Stock

Schneider Electric

PC-A984-130

Genuine surplus Schneider PC-A984-130 Modicon processor — 32-bit RISC, 200 MHz, 512 KB Flash. Verified condition, ready to…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: BMEH584040C

We reply within one business day.

BMEH584040C Quote reply within 1 business day