Schneider Electric Communication Modules

Schneider Electric BMENOP0300C

Communication module

Manufacturer: Schneider Electric Part Number: BMENOP0300C

Genuine surplus BMENOP0300C communication module for Modicon M580 PACs — verified condition, three Ethernet ports, IEC 61850 support.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Product Compatibility M580 PAC
Physical Interface 3 Ethernet 10/100BASE-TX
Transmission Rate 10 Mbit/s, 100 Mbit/s
Communication Service MMS messaging client/server IEC 61850, Goose IEC 61850, Modbus TCP messaging, RSTP support, IP forwarding
Current Consumption 1250 mA at 3.3 V DC internal
Module Format Standard
Net Weight 0.24 kg
Operating Temperature 0…60 °C
Operating Altitude ≤ 2000 m
Protective Treatment Conformal coating

Description

When a Modicon M580 PAC needs an IEC 61850 communication module and the OEM lead time stretches into weeks, downtime on the plant floor compounds. The BMENOP0300C from Schneider Electric is a genuine surplus communication module built for M580 PACs, giving maintenance and procurement teams a verified alternative to waiting on factory allocation.

What This Module Does in an M580 Architecture

The BMENOP0300C is a standard-format communication module that slots into a Modicon M580 PAC. It provides three Ethernet 10/100BASE-TX physical interfaces and supports transmission rates of 10 Mbit/s and 100 Mbit/s over standard Ethernet cable. On the protocol side, the module handles MMS messaging client and server functions for IEC 61850, Goose IEC 61850, Modbus TCP messaging, RSTP support, and IP forwarding. That combination makes it a practical fit where an M580 controller must exchange data with substation automation or other IEC 61850-aware devices while keeping Modbus TCP connectivity available. The module draws 1250 mA at 3.3 V DC internally and weighs 0.24 kg.

Figure 1: Front view of the Schneider Electric BMENOP0300C Communication module showing its physical design and enclosure.

Surplus Advantage: Verified Stock Versus Factory Wait

Autronexa supplies this module as genuine surplus and refurbished stock, tested against OEM datasheet specifications and functionally verified by our sourcing team. For a communication module tied to a running PAC, the practical benefit is straightforward: you avoid the extended lead times that often come with ordering a factory-new unit through standard distribution channels. This unit carries CE, UL, CSA, RCM, EAC, Merchant Navy, ATEX zone 2/22, and IECEx zone 2/22 certifications, and it is conformally coated for harsh environments. Each unit we ship is checked for authentic Schneider Electric markings and part-number cross-reference before dispatch. Please verify current lifecycle status and availability with Autronexa before ordering.

Figure 2: Technical layout and connection details for the Schneider Electric BMENOP0300C Communication module.

Selection and Sourcing Guide for Buyers

Before committing to a surplus communication module, confirm the exact model and revision match your M580 PAC configuration. Check that the three Ethernet ports and the IEC 61850 service set align with your network design — MMS client/server, Goose, Modbus TCP, RSTP, and IP forwarding are all supported here. Review the environmental limits: operation from 0…60 °C, storage from -40…85 °C, relative humidity 0…95 % without condensation, and operating altitude up to 2000 m. The conformal coating and hazardous-location ratings (class I division 2, ATEX zone 2/22, IECEx zone 2/22) matter if the cabinet sits in a classified area. Ask your supplier to state condition clearly — surplus versus refurbished — and to confirm accessory compatibility. Autronexa provides verified condition details and clear lead times on every genuine surplus unit. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this BMENOP0300C a genuine Schneider Electric module or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. This is genuine surplus stock, not a grey-market copy.

What condition will the BMENOP0300C arrive in?

It ships as refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team.

How fast can you ship the BMENOP0300C?

Contact Autronexa for current lead time. Surplus and refurbished stock is ready to ship once condition and availability are confirmed.

Does this module work with Modicon M580 PACs?

Yes — the data lists product compatibility with M580 PAC and three Ethernet 10/100BASE-TX interfaces supporting IEC 61850 and Modbus TCP services.

Is the BMENOP0300C still supported by Schneider Electric?

Contact Autronexa to verify OEM support status. We can confirm lifecycle information before you order.

Related & compatible parts

Schneider Electric

BMXSAI0410

Genuine surplus Schneider Electric BMXSAI0410 safety analog input module — 4 isolated 4...20 mA inputs, verified and ready…

In Stock

Schneider Electric

140NOE35100

Genuine surplus Schneider Electric 140NOE35100 Ethernet module — fiber-optic 10BASE-FL connectivity for Modicon Quantum, verified and ready to…

In Stock

Schneider Electric

140DDI35300

Genuine surplus Schneider Electric 140DDI35300 Modicon Quantum 32-point 24 V DC input module, verified and ready to ship…

In Stock

Schneider Electric

BMENOR2200

Genuine surplus Schneider Electric BMENOR2200 RIO head module for Modicon M580 — verified condition, faster lead time than…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: BMENOP0300C

We reply within one business day.

BMENOP0300C Quote reply within 1 business day