Schneider Electric I/O & Function Modules

Schneider Electric BMXEHC0800

Module

Manufacturer: Schneider Electric Part Number: BMXEHC0800

Genuine surplus Schneider Electric BMXEHC0800 8-channel high-speed counter module — verified, tested, and ready to ship from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Channels 8
Type High-speed counter
Maximum frequency 10 kHz
Counting mode Incremental encoder
Supply voltage 24 V DC (via backplane)
Power consumption 3.6 W
Bus current 150 mA @ 24 V DC
Operating temperature 0°C to +60°C
Protection rating IP20
Dimensions (H×W×D) 100 × 28 × 93 mm

Description

The Schneider Electric BMXEHC0800 is an 8-channel high-speed counter module from the Modicon X80 series, built for maintenance teams and integrators who need reliable incremental encoder counting without paying OEM list price or waiting on factory lead times. Autronexa supplies this unit as verified surplus, tested against OEM datasheet specifications.

What This Counter Module Does in a Modicon X80 Rack

The BMXEHC0800 occupies a single slot and handles eight application channels of high-speed counting at a maximum frequency of 10 kHz, using incremental encoder counting mode. Each channel is isolated channel-to-channel, which matters in practice: a fault or noise event on one encoder line stays contained instead of disturbing neighbouring channels. That isolation reduces the risk of a single wiring problem taking down several axes at once, and it keeps troubleshooting scoped to one channel rather than the whole card. A module status LED gives technicians a first-line diagnostic without pulling the rack apart. The unit draws 3.6 W and 150 mA at 24 V DC via the backplane, so it adds little to the enclosure’s thermal and supply budget — a small but real saving when you are adding channels to an existing cabinet without upgrading the power supply. The Modicon X80 platform is shared across M340 and M580, which means one spare can serve both controller families on the same site. That single-spare coverage is a direct inventory cost reduction: fewer distinct part numbers on the shelf, less capital tied up in slow-moving stock.

Figure 1: Front view of the Schneider Electric BMXEHC0800 Module showing its physical design and enclosure.

Why Genuine Surplus Fits This Module

Because the X80 platform is shared between M340 and M580, demand for this counter card is steady across mixed-fleet sites, and used units in good condition are genuinely useful rather than a compromise. Autronexa sources surplus and refurbished modules and verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. You get genuine parts, verified, at a fraction of the cost of a new-from-OEM purchase, with lead times that reflect stock on hand rather than a factory queue. For a card that sits in a running rack, that difference in availability is often worth more than the price gap alone. The lifecycle status is active, last verified 2026-09, so the module remains part of a supported platform — but please verify current lifecycle status and availability with Autronexa before ordering.

Figure 2: Technical layout and connection details for the Schneider Electric BMXEHC0800 Module.

Sourcing Checks Before You Buy

Before committing, confirm the exact model and revision match your rack documentation, and confirm you are buying a counter module rather than a different X80 I/O card — the family shares a form factor, so part-number checks matter. Ask for the condition grade: surplus, refurbished, or new, and match it to how critical the axis is. Verify that your incremental encoders are compatible with the counting mode and that the 10 kHz maximum frequency covers your pulse rates with margin. Check the environmental envelope: 0°C to +60°C operating, -25°C to +70°C storage, 5% to 95% relative humidity non-condensing, and IP20 protection, which means the module belongs inside a proper enclosure, not on an open panel. Finally, confirm slot availability — one slot per module — and backplane supply headroom for 150 mA at 24 V DC. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: BMXEHC0800-datasheet.pdf

Frequently asked questions

Is this a genuine Schneider Electric BMXEHC0800, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. We supply genuine surplus and refurbished modules, not grey-market copies.

What condition will the BMXEHC0800 arrive in?

Units are supplied in the site default condition, refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask us to confirm the grade of the specific unit before you order.

How fast can Autronexa ship this counter module?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability; surplus stock typically ships faster than an OEM factory order.

Does the BMXEHC0800 work with both M340 and M580 controllers?

Yes. The Modicon X80 platform is shared across M340 and M580, so this module can serve either controller family. Confirm rack and slot compatibility against your own documentation before installation.

Is the BMXEHC0800 still supported by Schneider Electric?

Lifecycle status is recorded as active, last verified 2026-09. Contact Autronexa to verify current OEM support status and availability before ordering.

Related & compatible parts

Schneider Electric · Advantys STB

STBNDN1010

Genuine surplus Schneider STBNDN1010 Advantys STB DeviceNet NIM — verified condition, tested, and ready to ship for legacy…

In Stock

Schneider Electric

ABE7CPA31E

Genuine surplus Schneider Electric ABE7CPA31E 8-channel analog input sub-base — verified condition, practical lead times, sourcing support from…

In Stock

Schneider Electric

STBDDI3610K

Genuine surplus STBDDI3610K digital input kit — 6-channel 24 V DC module with base and connectors, verified and…

In Stock

Schneider Electric

ATV930D30N4Z

Genuine surplus Schneider Electric ATV930D30N4Z drive — dual-rated 30/22 kW, verified condition, faster than OEM lead times.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: BMXEHC0800

We reply within one business day.

BMXEHC0800 Quote reply within 1 business day