Schneider Electric Cables & Connectors

Schneider Electric BMXXBC015K

Cable

Manufacturer: Schneider Electric Part Number: BMXXBC015K

Genuine surplus BMXXBC015K X-bus expansion cable — 1.5 m, 9-pin SUB-D, verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Type X-bus expansion cable
Length 1.5 m
Connector 9-pin SUB-D
Function Daisy-chain X-bus connection between multiple racks
X-bus total length max 30 m
Lifecycle Active (shared I/O platform for M340 and M580)

Description

When a Modicon M340 or M580 rack needs to extend its I/O across a second enclosure, the X-bus daisy-chain is the link that makes it work — and a missing or damaged cable stops the whole segment. The BMXXBC015K from Schneider Electric is the 1.5 m X-bus expansion cable for exactly that job, and Autronexa supplies it as a genuine surplus part with verified condition so maintenance teams can restore the bus without waiting on a factory order.

What This Cable Does in a Modicon X80 System

The Modicon X80 platform shares I/O modules between M340 and M580 controllers, and the X-bus is how those modules talk across racks. This cable carries the daisy-chain connection between multiple racks using a 9-pin SUB-D connector at each end. Its 1.5 m length suits adjacent cabinets or short inter-rack runs, while the platform allows an X-bus total length of up to 30 m across the chain. In practice, that means you can plan a multi-rack layout and use this cable as one segment, adding further segments as the architecture grows. The part is an expansion cable rather than a programming or fieldbus lead, so it stays inside the rack-to-rack bus and does not change how the controller communicates with drives or remote I/O.

Figure 1: Front view of the Schneider Electric BMXXBC015K Cable showing its physical design and enclosure.

Why Genuine Surplus Fits This Part

Cables like this fail from handling, tight bend radii, or connector damage during panel modifications — not from age. That makes surplus stock a practical route: Autronexa sources genuine Schneider Electric units, checks connector condition and continuity, and lists them with clear lead times. Because the X80 platform is active and shared across two controller families, demand for this cable stays steady, and refurbished or surplus units often reach a site faster than a backordered factory shipment. Every unit is verified against OEM datasheet markings, so you are not gambling on a lookalike SUB-D lead with unknown pinout. For a bus segment carrying live I/O, that verification matters more than a catalogue photo.

Figure 2: Technical layout and connection details for the Schneider Electric BMXXBC015K Cable.

Sourcing Checklist Before You Order

Confirm the cable length matches your rack spacing — 1.5 m is the short variant, and longer runs need additional segments within the 30 m X-bus limit. Check that your existing connectors are 9-pin SUB-D and undamaged, since a bent pin on the rack side will fault the new cable too. Decide whether you need a single replacement or a spare for the maintenance crib; surplus pricing makes a spare realistic. Ask Autronexa for the current condition grade and lead time before committing, and verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: BMXXBC015K-datasheet.pdf

Frequently asked questions

Is this BMXXBC015K a genuine Schneider Electric cable or a copy?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before listing. The cable is supplied as genuine surplus or refurbished stock, not a grey-market clone.

What condition will the cable arrive in?

Units are supplied in the site default condition, Refurbished, meaning tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa for the current condition grade on the specific unit in stock.

How fast can you ship the BMXXBC015K?

Lead time depends on current stock. Contact Autronexa for current lead time and availability; surplus units typically move faster than a factory backorder.

Does this cable work with both M340 and M580 racks?

The Modicon X80 platform is the shared I/O platform for M340 and M580, and this is the X-bus expansion cable for daisy-chaining racks within that platform. Confirm your rack connectors are 9-pin SUB-D before ordering.

Is the BMXXBC015K still supported by Schneider Electric?

The lifecycle status recorded for this part is Active as a shared I/O platform for M340 and M580, last verified September 2026. Contact Autronexa to confirm current OEM support status before ordering.

Related & compatible parts

Schneider Electric

BMXSDI1602

Genuine surplus Schneider BMXSDI1602 safety discrete input module — 16 inputs, 24 V DC positive, verified and ready…

In Stock

Schneider Electric

BMXNOE0110

Genuine surplus BMXNOE0110 Ethernet TCP/IP module for Modicon M340 — verified condition, practical lead times, sourcing help from…

In Stock

Schneider Electric

170XTS00900

Genuine surplus Schneider Electric 170XTS00900 Interbus terminal connector kit — verified condition, practical sourcing support, ready to ship.

In Stock

Schneider Electric

TSXCTY2C

Genuine surplus Schneider TSXCTY2C counter module: 2 channels, 1 MHz, 24 V sink inputs. Verified condition, ready to…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: BMXXBC015K

We reply within one business day.

BMXXBC015K Quote reply within 1 business day