Schneider Electric I/O & Function Modules
Schneider Electric STBACI1230K
Standard analog input kit
Genuine surplus Schneider STBACI1230K analog input kit for Modicon STB — 2-channel 0...20 mA, 12-bit, verified and ready to ship.
- 12 Month
- Refurbished
- In Stock
Availability & pricing
Pricing is available on request — send an RFQ for a same-day quote.
5-15 days
Technical specifications
| Analogue input type | Current 0...20 mA |
|---|---|
| Analogue input number | 2 |
| Analogue input resolution | 12 bits |
| Type of filter | Single low pass input filter 25 Hz |
| Response time | 5 ms |
| Update time | 10 ms |
| Input impedance | <= 300 Ohm |
| [Us] rated supply voltage | 24 V DC |
| IP degree of protection | IP20 EN 61131-2 class 1 |
| Ambient air temperature for operation | -25...70 °C |
Description
The Schneider Electric STBACI1230K is a standard analog input kit for the Modicon STB distributed I/O solution, built around a 2-channel 0…20 mA input module with 12-bit resolution. Maintenance and automation teams choose genuine surplus or refurbished units of this kit when OEM lead times stretch and a verified spare keeps the I/O segment running.
What the STBACI1230K Kit Contains
This is not a bare module. The kit ships as a complete assembly: the STBACI1230 analog input module, an STBXBA1000 mounting base, an STBXTS1100 6-terminal screw-type connector, and an STBXTS2100 6-terminal spring-clamp connector. That combination lets you replace a failed input point without separately sourcing the base and terminal hardware. The module accepts two current inputs in the 0…20 mA range, resolves them at 12 bits, and applies a single low-pass input filter at 25 Hz. Response time is 5 ms, update time is 10 ms, and integral linearity is +/- 0.1 %FS. Absolute accuracy error is +/- 0.5 % of full scale at 25 °C, with temperature drift of +/-0.01 %/°C. Input impedance is <= 300 Ohm, and each input channel supplies 100 mA for sensors. Short-circuit protection is built in. The module draws 30 mA on the 5 V DC logic bus and is rated for 24 V DC supply through an STBPDT3100/3105 power distribution module. Status LEDs show green module status (RDY) and red module error (ERR).

Why Genuine Surplus Fits This Modicon STB Kit
Modicon STB distributed I/O is widely installed, and complete analog input kits are the parts that fail or go missing during panel work. A surplus or refurbished kit gives you the full assembly — module, base, and both connector types — rather than a module alone. Autronexa sources genuine units and verifies them against OEM datasheet markings and part-number cross-reference; refurbished stock is tested against OEM datasheet specifications and functionally verified by our sourcing team. For buyers comparing against OEM list price, the practical advantage is cost savings and faster availability on a part that is often stocked as a complete kit. Cold swapping is supported, and hot swapping fallback works with standard NIMs, so a verified spare can be staged before a planned outage. Please verify current lifecycle status and availability with Autronexa before ordering.

Buyer Checklist Before You Order
Confirm the exact kit composition you need: this configuration includes the STBXBA1000 base and both the screw-type and spring-clamp connectors, so check whether your panel uses one or both. Verify the input range matches your sensor loop — this is a 0…20 mA current input, not a voltage input. Check that your power distribution module is an STBPDT3100 or STBPDT3105. The module is rated IP20 and operates from -25…70 °C, with ATEX Cat 3G, CSA, C-Tick, FM Class 1 Division 2, and UL certifications listed. Ask your supplier to confirm condition — surplus versus refurbished — and to state the lead time in writing. Autronexa can cross-reference This unit against your existing STB segment and confirm what is in stock.
Frequently asked questions
Is this a genuine Schneider Electric STBACI1230K, or a clone?
Autronexa verifies units against OEM datasheet markings and part-number cross-reference. The kit is supplied as genuine surplus or professionally refurbished stock, not a grey-market copy.
What condition will the STBACI1230K kit arrive in?
The site default condition is Refurbished. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa if you need surplus condition instead.
How fast can you ship the STBACI1230K?
Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability before ordering.
Does the kit include the base and connectors?
Yes. This kit includes the STBACI1230 module, STBXBA1000 base, STBXTS1100 6-terminal screw-type connector, and STBXTS2100 6-terminal spring-clamp connector.
Is the STBACI1230K still supported by Schneider Electric?
Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability.
Related & compatible parts
Schneider Electric
ABE7H16R21
Genuine surplus Schneider Electric ABE7H16R21 16-channel sub-base, verified and ready to ship from Autronexa.
Schneider Electric
ABE7R16T230
Genuine surplus ABE7R16T230 relay sub-base: 16 channels, 230V AC coil, 5 A contacts. Verified condition, faster than OEM…
Schneider Electric
140NOM25200C
Genuine surplus Schneider Electric 140NOM25200C DIO head-end adaptor for Modicon Quantum — verified condition, sourcing help, faster than…
Schneider Electric
170XTS00301
Genuine surplus Schneider Electric 170XTS00301 terminal connector kit for Modicon Momentum — verified condition, ready to ship.
News & guides for Schneider Electric
Schneider Electric Product Carbon Footprint Data: What Engineers Can Look Up
TL;DR: Schneider Electric publishes product-level carbon data, but not through a single system. Product pages carry a “total life cycle…
Schneider Electric at Datacenter Korea 2026 and Tech Show Madrid: The Integrated AI Data Center Stack
Schneider Electric is pitching an integrated AI data center stack — power, cooling, and software as one system — at…
Schneider Electric spare parts: buying guide, series overview and how to order
Schneider Electric spare parts buying guide: 8 parts online, popular series, condition options and how our RFQ process works.
Murata’s SWL RF Test Connector: What the 40% Claim Actually Covers
Murata Manufacturing announced on 29 October 2026 that its SWL series of RF and microwave coaxial connectors with a built-in…
Nexans 700 VDC Microgrid: What Changes for Factories and Spares
Nexans has switched part of its own AmpaCity global innovation hub in Lyon, France, onto a 700 V direct-current main distribution…
EPC’s New 100 V GaN Inverter Boards: 35 ARMS, 100 kHz, 80 V Bus
In short: On 27 October 2026 EPC announced the EPC91124 and EPC91125, two 100 V three-phase BLDC inverter evaluation boards…
Omron C6 Servo Launches in Europe: What Changes for 1S and Spares
Omron's C6 servo launched in Europe on 7 October 2026 with a 26-bit encoder, 3.5 kHz response and STO. What…
Intel Offers Korean AI Chip Firms Custom Design, Packaging and Foundry Routes
Intel used its own Seoul summit to offer Korean AI chip companies custom silicon, advanced packaging and foundry routes. No…
