ABB I/O & Function Modules

ABB CI920AB

Sturdy

Manufacturer: ABB Part Number: CI920AB

Genuine surplus ABB CI920AB communication interface for S900 I/O — PROFIBUS DP-V1, ATEX Zone 2, verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article Number 3BDH000691R1
Fieldbus Protocol PROFIBUS DP-V1 (IEC 61158)
HART Support Yes
Redundancy Yes (power and communication)
Intrinsic Safety Yes
Hazardous Location ATEX Zone 2
Corrosive Atmosphere ISA-S71.04 G3
Ambient Temperature -20 °C...60 °C
Dimensions (W×D×H) 20 mm × 104 mm × 104 mm
Weight 0.13 kg (0.29 lbs.)

Description

The ABB CI920AB is a communication interface for the S900 I/O system, linking field-level I/O to a control system over PROFIBUS DP-V1. Maintenance and automation teams specify it when a remote I/O node needs a verified, genuine replacement without waiting on OEM lead times — and genuine surplus stock is exactly where Autronexa focuses.

Where This Interface Fits in an S900 I/O System

Industrial control has moved from centralized marshalling cabinets to field-mounted remote I/O, and the S900 family reflects that shift. The CI920AB (article number 3BDH000691R1) is the coupling module that connects the internal CAN bus of the S900 I/O rack to an external PROFIBUS DP-V1 network (IEC 61158). It carries HART data over PROFIBUS DP-V1 and supports line or media redundancy through two coupling modules. Electrical isolation between fieldbus and power is built in. The module is rated for ATEX Zone 2 installation, so it can sit directly in the field where intrinsically safe devices in Zone 2, Zone 1 or Zone 0 are wired. Configuration, parameterization and diagnostics run over PROFIBUS, with FDT/DTM tooling available for setup and fault-finding. For redundancy, ABB specifies using only unit units with the same firmware — check the release notes before pairing.

Figure 1: Front view of the ABB CI920AB Sturdy showing its physical design and enclosure.

Why Genuine Surplus Suits This Module

A communication interface is a single point of failure for an entire I/O rack. When one drops, the field signals behind it go dark, and an OEM replacement order can put weeks between fault and restart. Autronexa supplies genuine surplus and refurbished S900 components with verified condition and clear lead times. Each unit is checked against OEM datasheet markings and part-number cross-reference, and refurbished stock is tested against OEM datasheet specifications and functionally verified by our sourcing team. The practical trade-off is straightforward: you keep the exact unit configuration your network expects, avoid full OEM list pricing, and get a module that has been inspected rather than assumed. Please verify current lifecycle status and availability with Autronexa before ordering.

Figure 2: Technical layout and connection details for the ABB CI920AB Sturdy.

What to Confirm Before You Order

Start with the article number: 3BDH000691R1 identifies This unit V2.1 (CIPBA-B) variant. Confirm your rack is the S900 type B configuration for Zone 2 installation, since the hazardous-area rating is part of the module’s role, not an accessory. If you run redundant PROFIBUS DP-V1, match firmware across both coupling modules — ABB’s release notes are the reference. Decide whether surplus or refurbished condition fits your maintenance strategy; both are genuine parts, verified before dispatch. Finally, confirm the PROFIBUS DP-V1 network parameters and any gateway or cabling your cabinet requires. Autronexa’s sourcing team works with ABB S900 systems regularly and can cross-check your existing module markings against stock. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB CI920AB, or a clone?

Autronexa supplies genuine surplus and refurbished ABB units. Each CI920AB is verified against OEM datasheet markings and part-number cross-reference (article number 3BDH000691R1) before it is listed.

What condition will the CI920AB arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available depending on stock. Confirm the condition you need when you request a quote.

How fast can you ship the CI920AB?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability; we confirm lead time before you commit.

Can I use this module in a redundant PROFIBUS DP-V1 setup?

Yes, the CI920AB supports line or media redundancy via two coupling modules. ABB specifies using only CI920AB units with the same firmware for redundancy — observe the release notes for your firmware version.

Is the CI920AB rated for hazardous areas?

The module carries ATEX certification for installation in Zone 2 and is intended for connecting intrinsically safe field devices installed in Zone 2, Zone 1 or Zone 0. Confirm your S900 system variant matches before ordering.

Related & compatible parts

ABB

INNPM22

Genuine surplus ABB INNPM22 network processor for Symphony Infi 90 — verified condition and faster lead time than…

In Stock

ABB

CI540

Genuine surplus ABB CI540 S100 I/O Bus Extension module — verified condition, tested against OEM datasheet specs, ready…

In Stock

ABB

AO845A

Genuine surplus ABB AO845A analog output module: 8 channels, 4-20 mA, HART pass-through, redundancy-ready. Verified condition and sourcing…

In Stock

ABB

DO890

Genuine surplus ABB DO890 digital output module with intrinsic safety — verified, refurbished, and ready for hazardous-area I/O.

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: CI920AB

We reply within one business day.

CI920AB Quote reply within 1 business day