Schneider Electric Power Supplies

Schneider Electric 140CPS22400

Power supply module

Manufacturer: Schneider Electric Part Number: 140CPS22400

Genuine surplus Schneider 140CPS22400 redundant power supply for Modicon Quantum — verified condition, faster than OEM lead times.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Power supply type Redundant
Input voltage 24 V (20...30 V) DC
Input current 3800 mA
Output voltage 5.1 V DC
Output current 8 A redundant
Maximum input power interruption 100 ms; 1 ms at 20 V
Associated fuse rating 5 A, slow-blow
Alarm output 1 NC, 6 A, 220 V power supply fault
Operating temperature 32…140 °F (0…60 °C)
Net weight 1.43 lb (0.65 kg)

Description

When a Modicon Quantum rack loses its power supply, every I/O module behind it goes dark. The Schneider Electric 140CPS22400 is a redundant 24 V DC power supply module for the Quantum platform, and maintenance teams keep it on the shelf precisely because a failed supply stops the whole backplane. Autronexa supplies this unit as genuine surplus, verified before dispatch, so you replace the fault without waiting on an OEM allocation queue.

What This Module Does in a Quantum Rack

The 140CPS22400 takes a 24 V DC input across a 20…30 V DC window and delivers 5.1 V DC to the Quantum backplane at 8 A in redundant configuration. Redundancy is the point of this variant: two supplies share the load, so one can fail without dropping the rack. The module reports a fault through a single normally-closed alarm contact rated 6 A at 220 V, and a green PWR OK LED gives a local indication that the output is healthy. Input current sits at 3800 mA, and the unit tolerates a maximum input power interruption of 100 ms, with a tighter 1 ms window at 20 V. Internal overvoltage protection and an output overload trip at 2.3 times maximum rated input voltage for 1.3 ms are built in. A 5 A slow-blow fuse is the associated rating.

Figure 1: Front view of the Schneider Electric 140CPS22400 Power supply module showing its physical design and enclosure.

Why Genuine Surplus Fits This Power Supply

Power supplies are wear items. Electrolytics age, fans if present load up, and a supply that has run for a decade in a control cabinet is not the same as one on a shelf. That is why condition matters more here than for a passive component. Autronexa sources surplus and refurbished Quantum modules and tests each unit against OEM datasheet specifications, with functional verification by the sourcing team before it ships. You get a genuine Schneider assembly, not a re-labelled copy, at a fraction of the new-list route and without the lead time a factory order usually carries. For a rack that is already installed and validated, a verified surplus supply keeps the existing architecture intact — no re-engineering, no firmware surprises.

Figure 2: Technical layout and connection details for the Schneider Electric 140CPS22400 Power supply module.

Sourcing Checklist Before You Order

Match the exact part number and confirm the redundant configuration is what your rack needs; the non-redundant Quantum supplies are not interchangeable in a redundant slot. Check the input voltage at your cabinet — this module expects 24 V DC, not AC. Confirm the alarm contact wiring scheme your system uses, since the NC contact is your only remote fault signal. Ask for the condition grade in writing: surplus, refurbished, or new surplus are different things, and Autronexa states which one you are receiving. If the unit is going into a Class 1 Division 2 area, note that the FM listing on this module is part of its certification set and should be confirmed against your installation requirements. Finally, verify current lifecycle status and availability with Autronexa before ordering, since Quantum is a mature platform and stock moves. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine Schneider Electric 140CPS22400, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it is listed. The 140CPS22400 is supplied as genuine surplus or refurbished stock, not a grey-market copy.

What condition will the power supply arrive in?

The site default condition is Refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask Autronexa to confirm the specific grade of the unit in stock before you order.

How fast can Autronexa ship the 140CPS22400?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability, and the team will confirm the ship date for the unit on hand.

Does this module work in a redundant Quantum configuration?

Yes — the 140CPS22400 is the redundant variant, rated 8 A output at 5.1 V DC with a 24 V DC input range of 20...30 V. Confirm your rack wiring and alarm contact scheme against the module documentation before installation.

Related & compatible parts

Schneider Electric

PC-0984-385

Genuine surplus Schneider Electric PC-0984-385 CPU module for Modicon systems — verified condition, practical sourcing support.

In Stock

Schneider Electric

52-0402-000

Genuine surplus Schneider Electric 52-0402-000 tap terminator for Modicon Quantum — verified, tested, and ready to ship.

In Stock

Schneider Electric

140DAI75300

Genuine surplus Schneider Electric 140DAI75300 Modicon Quantum 32-channel 230 V AC discrete input module — verified condition, ready…

In Stock

Schneider Electric

ATV71HD15N4Z

Genuine surplus Schneider ATV71HD15N4Z Altivar 71 drive, 15 kW, 380–480 V AC, verified condition and ready to ship.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: 140CPS22400

We reply within one business day.

140CPS22400 Quote reply within 1 business day