Schneider Electric Communication Modules

Schneider Electric 140NOC77100

Network module facilitating communication over the EtherNet/IP protocol

Manufacturer: Schneider Electric Part Number: 140NOC77100

Genuine surplus Schneider 140NOC77100 EtherNet/IP module for Modicon Quantum — verified condition, 128 connections, faster than OEM lead time.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Product Line Modicon Quantum
Communication Port Protocol EtherNet/IP
Maximum Number of Connections 128
Transmission Rate 10/100 Mbit/s
Transmission Support Medium Twisted Pair
Port Ethernet RJ45
Local Signalling LED
Current Consumption 500 mA
Degree of Protection IP20
Standards UL 508

Description

When a Modicon Quantum rack loses its EtherNet/IP link, every downstream device on that segment goes silent. The Schneider Electric 140NOC77100 is a genuine surplus network module that restores 10/100 Mbit/s twisted-pair communication with up to 128 simultaneous connections — sourced, verified, and ready to ship from Autronexa.

What This Module Does in a Quantum Rack

The 140NOC77100 occupies a single slot in a Modicon Quantum backplane and gives the controller an Ethernet RJ45 port speaking EtherNet/IP. It draws 500 mA from the rack power supply, so no separate external supply is needed. Local LED signalling shows link and activity status at the module face, which shortens fault-finding during commissioning. The module carries an IP20 rating and UL 508 compliance, placing it in clean, indoor cabinet environments. Because it is a dedicated network module rather than a general-purpose CPU, it slots into existing Quantum architectures without re-engineering the control program — the rack sees it as a communication card and the rest of the system continues to operate.

Figure 1: Front view of the Schneider Electric 140NOC77100 Network module facilitating communication over the EtherNet/IP protocol showing its physical design and enclosure.

Surplus and Refurbished: Why It Fits This Module

Quantum racks are long-lived, and a failed network card can idle an entire line while an OEM order works through its queue. Autronexa stocks genuine surplus and refurbished Quantum modules so maintenance teams can close that gap. Each unit is tested against OEM datasheet specifications and functionally verified by our sourcing team before it ships — not just visually inspected. You get a verified module with a clear lead time instead of an open-ended factory backorder. For buyers comparing against grey-market listings, the difference is traceability: the part number, protocol, and connection count are confirmed on the unit itself. Please verify current lifecycle status and availability with Autronexa before ordering.

Figure 2: Technical layout and connection details for the Schneider Electric 140NOC77100 Network module facilitating communication over the EtherNet/IP protocol.

Choosing Between Quantum Network Options

Buyers often weigh this module against other Quantum communication cards. The comparison below uses only the published specifications for this unit; confirm the alternate module’s own datasheet before substituting.

Criterion unit (this module) Typical alternate Quantum comm card
Protocol EtherNet/IP Varies by module — confirm datasheet
Max connections 128 Varies by module
Transmission rate 10/100 Mbit/s Varies by module
Port Ethernet RJ45 Varies by module
Supply Via rack power supply Confirm per module

Before ordering, confirm the exact part number and revision match your rack documentation, decide whether surplus or refurbished condition suits your spares policy, and check that the RJ45 port and EtherNet/IP protocol align with your network design. Autronexa can cross-reference your existing card against this unit and confirm condition and current availability.

Frequently asked questions

Is this a genuine Schneider Electric 140NOC77100, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it enters stock. The module you receive is a genuine Schneider Electric unit, not a copy.

What condition will the module arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units may also be available — confirm the condition you need when you request a quote.

How fast can Autronexa ship the 140NOC77100?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability; we confirm the ship date before you commit.

Will this module work in my existing Modicon Quantum rack?

The module is a Modicon Quantum network card communicating over EtherNet/IP via an Ethernet RJ45 port at 10/100 Mbit/s, powered from the rack supply. Confirm your rack slot and network design match these specifications before ordering.

Related & compatible parts

Schneider Electric

170ADO54000

Genuine surplus Schneider Electric 170ADO54000 Modicon Momentum 16-channel AC Triac module — verified condition, ready to ship.

In Stock

Schneider Electric

BMXP342030

Genuine surplus BMXP342030 Modicon M340 CPU — ARM9, CANopen + Ethernet, verified condition, faster than OEM lead time.

In Stock

Schneider Electric

170MCI10001

Genuine surplus Schneider Electric 170MCI10001 Modicon Quantum Interbus cable, 1 m, verified condition and ready to ship.

In Stock

Schneider Electric · Advantys STB

STBDAI5260

Genuine surplus STBDAI5260: Schneider Advantys STB 2-channel 115V AC isolated input, hot-swappable, verified condition and lead times.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: 140NOC77100

We reply within one business day.

140NOC77100 Quote reply within 1 business day