Schneider Electric Power Supplies

Schneider Electric 140CPS41400C

Power Supply Module

Manufacturer: Schneider Electric Part Number: 140CPS41400C

Genuine surplus Schneider Electric 140CPS41400C power supply — verified condition, 48–60 V DC input, 8 A summable output, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Input Voltage 48–60 V DC
Output Voltage 5.1 V DC
Output Current 8 A summable
Input Current ≤ 3.8 A
Rated Power 15.6 W
Fuse Rating 2 A time-lag
Input Hold-up Time 13 ms @ 48 V
Inrush Current 14 A @ 40 V
Alarm Output 1 NC, 6 A @ 220 V
Local Signaling 1 green LED (PWR OK)

Description

When a Modicon Quantum rack loses its 5.1 V DC rail, every module downstream stops communicating and production visibility disappears. Sourcing a genuine Schneider Electric 140CPS41400C power supply module quickly — and knowing it is authentic — protects both uptime and maintenance budget.

What This Quantum Power Supply Delivers

The 140CPS41400C is a standard-format power supply module for the Modicon Quantum platform, converting a 48–60 V DC input into a regulated 5.1 V DC output at up to 8 A in a summable configuration. That summable output is the practical cost lever: instead of replacing the whole supply when load grows, you add capacity across modules, deferring capital spend. Internal overvoltage and overload protection plus a 2 A time-lag fuse reduce the risk of a fault cascading into adjacent cards — each protected module is a repair bill avoided. A single green LED (PWR OK) gives technicians a fast visual check, cutting diagnostic labour on every service visit.

Figure 1: Front view of the Schneider Electric 140CPS41400C Power Supply Module showing its physical design and enclosure.

Surplus Economics for the Quantum Platform

Quantum systems remain embedded in process and utility plants, yet OEM lead times on individual modules can stall a planned outage. Autronexa stocks genuine surplus and refurbished units so maintenance teams avoid paying full list price for a part that may sit in a rack for years. Each unit is tested against OEM datasheet specifications and functionally verified by our sourcing team before dispatch. For this module, the 13 ms hold-up time at 48 V and 14 A inrush at 40 V are checked as part of that verification, because weak hold-up is a common failure mode in ageing supplies. Refurbished, verified stock keeps spares budget predictable and removes the grey-market risk of unmarked clones.

Figure 2: Technical layout and connection details for the Schneider Electric 140CPS41400C Power Supply Module.

Sourcing Checklist Before You Order

Confirm three things before committing: the exact part number including suffix, the input voltage present at your panel (48–60 V DC), and whether your rack configuration expects the summable 8 A output. Also confirm the alarm wiring — this unit provides one normally closed output rated 6 A at 220 V, and mismatched alarm circuits cause nuisance trips. Ask for the condition grade in writing: surplus versus refurbished changes the price and the warranty conversation. Autronexa supplies genuine parts, verified against OEM markings, and can cross-reference your existing module before shipment. Please verify current lifecycle status and availability with Autronexa before ordering.

Frequently asked questions

Is this a genuine Schneider Electric 140CPS41400C, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it enters stock. We supply genuine surplus and refurbished modules — not unmarked copies.

What condition will the module arrive in?

Our default condition is Refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask us to confirm the grade in writing with your quote.

How fast can you ship the 140CPS41400C?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability — surplus and refurbished units are typically ready to ship faster than OEM factory orders.

Does the 8 A summable output cover my Quantum rack load?

The module delivers 5.1 V DC at up to 8 A in a summable configuration. Confirm your total rack current draw and whether additional supplies are configured in parallel before ordering.

Is the 140CPS41400C still supported by Schneider Electric?

Lifecycle status is not stated in our public data. Contact Autronexa to verify OEM support status and current availability before you plan a replacement.

Related & compatible parts

Schneider Electric

BMECRA31210

Genuine surplus BMECRA31210 Ethernet RIO drop adapter for Modicon M580 — verified condition, practical lead times, sourcing support…

In Stock

Schneider Electric

ATV71HU22N4

Genuine surplus Schneider ATV71HU22N4 Altivar 71 drive, 2.2 kW, 380-480 VAC. Verified condition, faster lead time than OEM.

In Stock

Schneider Electric

TSXP5720

Genuine surplus Schneider Electric TSXP5720 CPU module for Modicon systems — verified condition, 176K-word memory, fast sourcing from…

In Stock

Schneider Electric

140DDO35300C

Genuine surplus Schneider Electric 140DDO35300C: 32 discrete outputs, 24V DC, 4 groups. Verified condition, faster than OEM lead…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: 140CPS41400C

We reply within one business day.

140CPS41400C Quote reply within 1 business day